Search for European Projects

38 European Projects Found

Searched on 125080 European Projects

 FINISHED 
A step change in our noise mitigation strategies is required in order to meet the environmental targets set for a number of sectors of activity affecting people through noise exposure. Besides being a hindrance to our daily life and subject to regulations, noise emission is also a competitive issue in today’s global market. To address these issues, new technologies have been emerging recently, bas ...
Read Project

 13

 FINISHED 
Since the publication of the first list of Critical Raw Materials (CRM) in 2010 by the Ad-hoc Working Group on CRM, numerous European projects have addressed (part of) the CRMs value and several initiatives have contributed to gather (part of) the related community into clusters and associations. This led to the production of important knowledge, unfortunately disseminated. Numerous databases have ...
Read Project

 30

 FINISHED 
...ons of education and labor. Environmental protection in engineering branches, architecture and construction refers to the design, development, analysis and implementation of wide range of appropriate technical-technological solutions, measures and practices. KLABS intends to modernize higher education provision in WB by developing new specializing study programmes and new professional profile prep ...
Read Project

 11

 FINISHED 

Preparing for Extreme And Rare events in coastaL regions (PEARL)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

"Coastal floods are one of the most dangerous and harmful natural hazards affecting urban areas adjacent to shorelines. Rapid urbanisation combined with climate change and poor governance means a significant increase in the risk of local surface flooding coinciding with high water levels in rivers and high tide or storm surges from the sea, posing a greater risk of devastation to coastal communiti ...
Read Project

 26

 FINISHED 

AdVanced Aerodynamic Tools for lArge Rotors (AVATAR)

Start date: Nov 1, 2013, End date: Oct 31, 2017,

The motivation for the AVATAR project lies in the fact that upscaling wind turbine designs towards 10-20 MW requires radical innovations to make this feasible. Many of these innovationshave a strong aerodynamic component and can be considered as unconventional from an aerodynamic point of view. As such the analysis of the resulting rotor designs falls outside the validated range of applicability o ...
Read Project

 14

 FINISHED 
The overall objectives of the INNWIND.EU project are the high performance innovative design of a beyond-state-of-the-art 10-20MW offshore wind turbine and hardware demonstrators of some of the critical components. These ambitious primary objectives lead to a set of secondary objectives, which are the specific innovations, new concepts, new technologies and proof of concepts at the sub system and t ...
Read Project

 29

 FINISHED 
Refractory metals (tungsten, tantalum, rhenium, molybdenum and niobium) are highly strategic metals today mainly imported from a few countries. The European primary production remains below a few percentage. However, resources exist in Europe, as primary resources but mainly as secondary resources (industrial waste, urban mines). Valorizing these resources requires coordination and networking betw ...
Read Project

 21

 FINISHED 
The central hypothesis of this project is that socio-economic, socio-demographic, ethnic and cultural diversity can positively affect social cohesion, economic performance and social mobility of individuals and groups. A better social cohesion, higher economic performance and increased chances for social mobility will make European cities more liveable and more competitive. In this period of long- ...
Read Project

 17

 FINISHED 

New Technologies for Tunnelling and Underground Works (NETTUN)

Start date: Sep 1, 2012, End date: Feb 28, 2017,

...TUN 54M project will enable groundbreaking change in the construction, management and maintenance of tunnels in pursuit of the goals of NMP.2011.4.0-2 via 9 focussed WPs addressing key scientific and technical challenges: (i) a multi-sensor ground prediction system for TBMs to enable effective look-ahead during boring; (ii) a robotic maintenance system that enables automation of inspection and exc ...
Read Project

 24

 FINISHED 

Energy Efficient Safe SHip OPERAtion (SHOPERA)

Start date: Oct 1, 2013, End date: Oct 31, 2016,

The 2012 guidelines on the attained Energy Efficiency Design Index (EEDI) for new ships (MEPC.212(63)) represent a major step forward in implementing the REGULATIONS ON ENERGY EFFICIENCY OF SHIPS (resolution MEPC.203(62)). There are, however, serious concerns regarding the sufficiency of propulsion power and of steering devices to maintain the manoeuvrability of ships in adverse conditions, hence ...
Read Project

 23

 FINISHED 

Technology Transfer in Computing Systems (TETRACOM)

Start date: Sep 1, 2013, End date: Aug 31, 2016,

The mission of the TETRACOM Coordination Action is to boost European academia-to-industry technology transfer (TT) in all domains of Computing Systems. While many other European and national initiatives focus on training of entrepreneurs and support for start-up companies, the key differentiator of TETRACOM is a novel instrument called Technology Transfer Project (TTP). TTPs help to lower the barr ...
Read Project

 33

 FINISHED 

Initial Training for Atmospheric Remote Sensing (ITARS)

Start date: Apr 1, 2012, End date: Mar 31, 2016,

"This proposal brings together a group of universities, research organisations and high-tech companies from different disciplines (meteorology, geosciences, physics, electrical engineering, mathematics) with the aim to foster training and further development in the area of remote sensing of the atmosphere. The last years have brought a rapid development in instrumental techniques, i.e. lidar, rad ...
Read Project

 9

 FINISHED 
"Morphing in aircrafts has been studied and used throughout recent time in order to increase their flight envelope. This characteristic is of the upmost importance in order to offer a greater efficiency, versatility and performance during the assigned mission. Moreover an aircraft with the capability to adapt itself to each given situation is prone to achieve positive results to a range of differe ...
Read Project

 9

 FINISHED 
eGovPoliNet sets up an international community in ICT solutions for governance and policy modelling. The international community of researchers and practitioners will share and advance research and insights from practical cases around the world. To achieve this, eGovPoliNet will build on experiences accumulated by leading actors bringing together the innovative knowledge of the field. Capabilities ...
Read Project

 20

 FINISHED 
"AMISS proposal aims at establishing a collaborative network that will be able to acquire international visibility by providing theoretical and applicative advancements in the field of the active and passive microwave imaging systems. The proposal involves three EU Members and Associate Countries (Italy, The Netherlands, Turkey) and 4 partners from Third countries (Russia, Ukraine, Brazil) whose ...
Read Project

 3

 FINISHED 
Information and Communication Technologies have an unprecedented potential to improve the responsiveness of governments to the needs of citizens and have long been recognized as a key strategic tool to enable reforms in the public sector. During the last years, this potential of ICT has started to be dealt with in a multi-disciplinary way, giving birth to new research communities dealing with gov ...
Read Project

 9

 FINISHED 

Enhanced Driver Safety due to Improved Skid Resistance (SKIDSAFE)

Start date: Nov 1, 2009, End date: Oct 31, 2013,

"A good skid resistance of the pavement surface is of essence for road safety. Loss of skid resistance can have dramatic material and loss of life consequences. The problem is aggravated further in the presence of water, due to the phenomenon of hydroplaning. In this project the micro-mechanical factors controlling skid resistance at the tyre-pavement interface in asphalt concrete pavements shall ...
Read Project

 6

 FINISHED 
NEARCTIS (Network of Excellence: Advanced Road Cooperative Traffic management in the Information Society) is an academic network involving several of the main teams working on the field of traffic management and optimisation, with a particular focus on cooperative systems. Within the field of ICT for mobility, the project deals more specifically with the question of cooperative systems for road ...
Read Project

 8

 FINISHED 
The main scope of the DoubleNanoMem project is the development of nanostructured membranes based on the most appropriate combination of nanofillers with well-defined size and porosity, dispersed in advanced high free volume polymers with inherent nanoporosity for application in specific gas and vapour separations. This approach is driven by the main requirement for successful replacement of tradit ...
Read Project

 10

 FINISHED 
"The project HERCULES-B is the Phase II of the HERCULES programme, conceived in 2002 as a 7-year strategic R&D Plan, to develop the future generation of optimally efficient and clean marine diesel powerplants. The project is the outcome of a joint vision by the two major European engine manufacturer Groups, MAN Diesel and WARTSILA, which together hold 90% of the world’s marine engine market. The r ...
Read Project

 32

 FINISHED 

PROmoting MArine Research Careers (PROMARC)

Start date: Oct 1, 2008, End date: Sep 30, 2010,

"Europe has a strong maritime economy with a high global position. The strength of the European maritime industry is based on its entrepreneurship and ability to innovate. The European maritime companies can only maintain their position to produce innovative products if they can attract highly qualified RTD personnel. In order to remain at the cutting edge of knowledge and technology for green, co ...
Read Project

 13

 FINISHED 

Bringing the OpenMI-Life (OpenMI-LIFE)

Start date: Oct 1, 2006, End date: Jan 31, 2010,

...penMI from research output to becoming a sustainable operational product. It aimed to build the capacity to use the OpenMI and to demonstrate it in real life situations. It would also demonstrate the technical support and co-ordination. Finally, information about OpenMI would be disseminated to users. Results ...
Read Project

 12

 FINISHED 

Territorial dimension of the Lisbon/Gothenburg Process (Lisbon strategy)

Start date: Jul 22, 2004, End date: Feb 12, 2007,

Studying the territorial dimension of the Lisbon/Gothenburg Agenda comprises a multitude of very complex and broad processes and contexts. It will neither be feasible to conduct an analysis of the impact of the Lisbon/Gothenburg strategy nor to embrace all factors of competitiveness.The main scope of the study is to develop a number of basic analytical elements that can introduce territorial cohes ...
Read Project

 6

 FINISHED 

Urban-rural relations in Europe (Urban-rural)

Start date: Sep 5, 2002, End date: Apr 20, 2005,

The future of numerous rural areas is functionally increasingly interlinked with urban development in terms of flows, exchange processes, institutional links and interdependencies. This is obvious in densely populated areas (such as peri-urban zones) undergoing considerable processes of urbanisation. It is also relevant for more sparsely populated rural areas that are under less visible urban infl ...
Read Project

 12

 FINISHED 

Urban areas as nodes in a polycentric development (Polycentricity)

Start date: Sep 5, 2002, End date: Apr 20, 2005,

The European urban system is a main territorial structure and the cities are key drivers in the development of regions and larger territories. The specific functionality and potentials of cities are being explored and a typology of the European urban reality developed. The ESDP highlighted the objective of a polycentric development in support of a balanced and harmonious European territory. The pr ...
Read Project

 13

 FINISHED 
Several studies show that university spin-offs (USOs) do not grow. Knowing the importance of USOs for a competitive knowledge based Economy it becomes critical to find ways to improve their growth through the development of Key Entrepreneurial Skills (KES). This is the main reason for our project SPIN-UP. The project aims at preparing a comprehensive and effective Entrepreneurship Training and Coa ...
Read Project

 4

 FINISHED 
...nning Degree.WP3– Will RETHINK Curricula for Environmental Sciences/Climate Engineering Degree. WP4– Upgrade cluster - aims at upgrading PC HEIs English language skills, modernize their technical base/teaching materials/training methods.WP5– Quality Statute will set the quality plan and check the project’s quality performance.WP6– Expand RETHINK aims at setting the dissemination strategy.WP7– Expl ...
Read Project

 22

 FINISHED 
Practical teaching programmes in electrical engineering : The project will bridge a gap caused by excessive concentration on theory in electrical engineering training programmes. It will provide interactive simulations which give the student the opportunity to study the theory of the subject whilst at the same time engaging in simulated practical experiments. This project started in 2002 and laste ...
Read Project

 13

 FINISHED 
Continuum is a LL Erasmus Multilateral Project that aims at putting together schools of architecture and small to medium-sized enterprises to exchange research results, information, ideas, techniques, methods and expertise in the domain of design-to-manufacturing. A large number of contemporary buildings is generated through parametric design, that is the design of forms with the irreplaceable aid ...
Read Project

 13

 FINISHED 
Information technology at the service of logistics and transportation : The aim of the LOGIS project was to create a training course in Logistics Information Systems (LIS) for specialists in the transportation sector. The course specifically focused on modern information technology methods and techniques. This project started in 2000 and lasted 19 months.
Read Project

 10

 FINISHED 
The project is designed to advance capacity in education, research, innovation and exploitation of knowledge in the area of Renewable Energy and Environmental Technology in Bosnia and Herzegovina, Kyrgyzstan, Moldova and Ukraine through cooperation with European Universities within a framework of Doctoral Programme.To meet this overall objective, the project team will:- introduce advanced Bologna- ...
Read Project

 19

 FINISHED 
The EUGENE Network aims at improving the impact of European Engineering Education (EE) on competitiveness, innovation andsocio-economic growth in a global context. This goal will be achieved by setting–up and a top-level “discussion & action” forum tomonitor and support the continuous evolution of EE in the EHEA and to open its competition and cooperation borders beyondEurope. Indeed, although Eur ...
Read Project

 71

 FINISHED 
The project is designed to establish system for training of public authorities aimed at improving level of environmental expertise, facilitating good governance and sustainable infrastructure development in Western Balkan countries. To meet this overall objective, the project team will:• develop training programme for capacity building of the staff of public authorities in sustainable infrastructu ...
Read Project

 12

 FINISHED 
...interactive design (synthesis) oriented virtual distance laboratory experiments. The field of work is the Electrical Engineering (EE), addressing different target groups like students and teachers in technical schools and universities, employees in companies or the unemployed. The main outcome will be the set of virtual laboratory experiments accessible via the web covering both basic and advanced ...
Read Project

 23

 FINISHED 
Continuum aims at putting together schools of architecture and small to medium sized enterprises to exchange research results, information, ideas, techniques, methods and expertise in the domain of design-to-manufacturing. Continuum will develop a series of activities such as student workshops to visit small to medium sized enterprises to become familiar with their limitations and potentials. Staf ...
Read Project

 13

 FINISHED 
...ons, new advanced manufacturing facilities, new transportation systems to name a few. The EIE skills’ base of the EU needs to be increased such that we have well trained engineers who are not only technically competent but also able to exploit opportunities through entrepreneurial alertness and action.At the individual level we need to enhance the communication, cooperation and mobility of indivi ...
Read Project

 31

 FINISHED 
Im Projekt „Microteaching“ sollen multimodulare Qualifizierungen entwickelt werden, welche sich auszeichnen durch:− hohe kurzfristige Einsetzbarkeit (just-in-time, learning-on-demand),− verschiedene an das Erfahrungs- und Problemwissen der Mitarbeiter anknüpfende Themen- bzw. Lerneinheiten,− dem Selbstlernen unterstützende, modulare und dem individuellen Lernverhalten angepasste Vermittlungsformen ...
Read Project

 31

 FINISHED 
The project is designed to create a base for preparing engineers capable of working on technological design of industrial and urban systems, industrial processes and consumer products taking into account environmental problems and given social and economical restrictions in Azerbaijan, Belarus, Kazakhstan and Ukraine.To meet this wider objective, the project team will:- introduce innovative Bologn ...
Read Project

 18