Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Phase I/II ex vivo gene therapy clinical trial for recessive dystrophic epidermolysis bullosa using skin equivalent grafts genetically corrected with a COL7A1-encoding SIN retroviral vector (GENEGRAFT)

Start date: Mar 1, 2011, End date: Dec 31, 2017,

RDEB is one of the most severe rare genetic skin diseases of children and adults characterized by skin blistering resulting from lack of expression of type VII collagen. There is no treatment for this life-threatening disease. In March 2009, we obtained the orphan drug designation for the Medicinal product: “Skin equivalent graft genetically corrected with a COL7A1-encoding SIN retroviral vecto ...
Read Project

 10

 FINISHED 

DEVICE FOR LARGE SCALE FOG DECONTAMINATION (COUNTERFOG)

Start date: Nov 1, 2013, End date: Oct 31, 2017,

COUNTERFOG will be a new, rapid response system for collapsing all kinds of dispersed agents (smoke, fog, spores, etc.) by using a fog made of a solution that could eventually contain any kind of neutralizing component. It will be a permanent installation in large public buildings like railway stations but also a portable COUNTERFOG for use outdoors, used to counteract a CBRN attack in its earlies ...
Read Project

 11

 FINISHED 

Model-based preclinical development of anti-tuberculosis drug combinations (PREDICT-TB)

Start date: May 1, 2012, End date: Oct 30, 2017,

Drug development in TB requires new integrated methods to transition the novel combination regimens needed to shorten first-line therapy and combat multi-drug resistance. Although new agents are emerging, the path to registration of such regimens remains uncertain while capacity for pivotal trials is limited. Selection and optimization of drug combinations for development depends on preclinical sy ...
Read Project

 23

 FINISHED 

Silicon Microphone (SiMic)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

MEMS (Micro-Electrical-Mechanical System) based microphones, so called “silicon microphones” - are relevant in many applications as their manufacturability is better compared to electret condenser mics (ECM). Often MEMS mics hold embedded ADCs (Analog-to-Digital Converter) on the same CMOS chip. Those “digital output mics” perfectly fit into innovative digital products e.g. smart phones. Extremely ...
Read Project

 2

 FINISHED 

Training & Research Involving Polymer Optical Devices (TRIPOD)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The project is located in the field of optical fibre sensors - an area where Europe has developed internationally competitive research and commercial activity. The aim is to significantly extend the range of application of optical fibre grating sensors by developing a mature version of the technology in polymer optical fibres and thereby increase European competitiveness.Polymer fibres offer some ...
Read Project

 8

 FINISHED 

Measurement for Europe: Training and Research for Internet Communications Science (METRICS)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

"Measurement for Europe: Training and Research for Internet Communications Science (METRICS) METRICS will offer a unique training and research opportunity for 13 ESRs and one ER in a network comprising seven partners and nine associate partners. The METRICS network comprises four strong academic partners (Aalto, UC3M, UCAM, UCL), three vendors (NEC, Ericsson, Narus), four ISPs (BT, TID, IIJ, Elisa ...
Read Project

 7

 FINISHED 

High Throughput Optical Tomography (HIGH THROUGHPUT TOMO)

Start date: Jun 15, 2013, End date: Jun 14, 2017,

"In recent years the use of 3D imaging approaches is becoming a necessity, in particular now that research has moved onto dynamic imaging of biological processes in-vivo. In this context, novel tomography techniques such as Fluorescence Molecular Tomography (FMT) for imaging in highly scattering media, and Optical Projection Tomography (OPT) and Selective Plane Illumination Microscopy (SPIM) for i ...
Read Project

 1

 FINISHED 

Harmonized framework allowing a sustainable and robust identity for European Citizens (EKSISTENZ)

Start date: Jun 1, 2014, End date: May 31, 2017,

"The increase of the identity theft phenomenon across Europe and its related human and economical impacts is a major concern for all M.S. Several EU initiatives are ongoing to try to curb this concern. Today’s identity can take various forms, either in the “real” world, as a primary identity delivered by a M.S. (passport, ID card, driving license...) but more and more in the “2.0” world (secondary ...
Read Project

 12

 FINISHED 

Optical Imaging and Laser TEchniques for BIomedical Applications (OILTEBIA)

Start date: Apr 1, 2013, End date: Mar 31, 2017,

"OILTEBIA (Optical Imaging and Laser TEchniques for BIomedical Applications) is an Initial Training Network (ITN) that seeks to train researchers in a multidisciplinary environment where pulsed laser technology, sensor and signal processing techniques meet in the biomedicalenvironment to achieve novel optical imaging technologies from bench to bedside, spanning from basic research and drug discove ...
Read Project

 10

 FINISHED 

INtelligent Fast Interconnected and Efficient Devices for Frontier Exploitation in Research and Industry (INFIERI)

Start date: Feb 1, 2013, End date: Jan 31, 2017,

"We propose to establish a training network for the development of intelligent devices and tools for cutting-edge applications in Astrophysics, High Energy Physics, Medical Physics and Telecommunications. The network aims to develop new technologies and algorithms, with a common theme of placing intelligence into data-acquisition, processing and transmission technologies very close to the informat ...
Read Project

 11

 FINISHED 

Machine Learning for Personalized Medicine (MLPM2012)

Start date: Jan 1, 2013, End date: Dec 31, 2016,

"Over the last decade, enormous progress has been made on recording the health state of an individual patient down to the molecular level of gene activity and genomic information – even sequencing a patient’s genome for less than 1000 dollars is no longer an unrealistic goal. However, the ultimate hope to use all this information for personalized medicine, that is to tailor medical treatment to th ...
Read Project

 11

 FINISHED 

A secure, modular and distributed mobile border control solution for European land border crossing points (MOBILEPASS)

Start date: May 1, 2014, End date: Dec 31, 2016,

MobilePass will focus on research and development towards technologically advanced mobile equipment at land border crossing points. This will allow border control authorities to check European, visa-holding and frequent third country travellers in a comfortable, fast and secure way. The mobile solution incorporates new technologies needed in mobile scenarios and embeds them in the actual border cr ...
Read Project

 12

 FINISHED 

Humidity Optimisation Tool (HOT)

Start date: Dec 1, 2014, End date: Nov 30, 2016,

"Humidity Optimisation Tool:Outside humidity treatment is a main contributor to aircraft ECS (environmental control system) power requirements. To reduce this power it is needed to know exactly the not to exceed outlet humidity at the pack outlet. Liquid water at Low Pressure ducting participates to cabin cooling but, if this quantity is too high, a fog can be seen.The purpose of the “Humidity Opt ...
Read Project

 2

 FINISHED 

Recommendations for Reliable Breeder Documents Restoring e-Passport Confidence and Leveraging Extended Border Security (ORIGINS)

Start date: Dec 1, 2014, End date: Nov 30, 2016,

The project ORIGINS aims to study the security of the extended border and more particularily passport breeder document security. The underlying idea of ORIGINS is to improve the security and therefore to restore the confidence in the application process and issuance of e-passports, by filling the gaps in security of breeder documents. Indeed, while some assurance approaches have been implemented i ...
Read Project

 15

 FINISHED 

Ideal Grid for All (IDE4L)

Start date: Sep 1, 2013, End date: Oct 31, 2016,

The IDE4L project will define, develop and demonstrate the entire system of distribution network automation, IT systems and applications for active network management. Active distribution networks will utilize distributed energy resources (DERs) for network management including both real time operation and long-term network planning viewpoints. DERs consist of aggregated distributed generation, de ...
Read Project

 13

 FINISHED 

Characterization of Structural Behaviour for High Frequency Phenomena (CRASHING)

Start date: Apr 1, 2014, End date: Sep 30, 2016,

The use of composite materials as principal structural elements in an aircraft requires the complete understanding of their mechanical properties. In particular, when structure is subjected to high frequency loading conditions (i.e. low and high energy impacts) phenomena as wave propagation, strain rate dependences, delaminations and rupture need to be fully understood. This is crucial to obtain c ...
Read Project

 2

 FINISHED 

ROBotic System with Intelligent Vision and Control for Tunnel Structural INSPECTion and Evaluation (ROBO-SPECT)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

The latest developments in robotics and the associated fields of computer vision and sensors open the floor for automated robotic solutions, exploitable in the near to medium term in the field of inspection of the civil infrastructure in general and transportation tunnel infrastructure in particular. The latter infrastructure is ageing urgently requiring inspection and assessment. Presently, inspe ...
Read Project

 11

 FINISHED 

Federation for FIRE (Fed4FIRE)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

A federation of experimentation facilities will significantly accelerate Future Internet research. Fed4FIRE will deliver open and easily accessible facilities to the FIRE experimentation communities, which focus on fixed and wireless infrastructures, services and applications, and combinations thereof. The project will develop a demand-driven common federation framework, based on an open architect ...
Read Project

 43

 FINISHED 

High throughput integrated technologies for multimaterial functional Micro Components (HINMICO)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

Volume production at industrial scale of miniaturised multi-material 3D (polymer-polymer, metal-polymer, metal-metal, polymer-ceramics,...) still face important challenges to be affordable by SMEs. Challenges not only in terms of precision manufacturing (precision engineering
Read Project

 16

 FINISHED 

Cross-Layer Abstractions and Run-time for I/O Software Stack of Extreme-scale systems (CLARISSE)

Start date: Sep 30, 2013, End date: Sep 29, 2016,

"The ever-increasing data needs of scientific and engineering applications require novel approaches to manage and explore huge amounts of information in order to advance scientific discovery. To achieve this goal, one of the main priorities of the international scientific community is addressing the challenges of performing scientific computing on Exaflop machines by 2020. Future Exaflop platforms ...
Read Project

 1

 FINISHED 

SUpeR REsolution Adaptive LIght Sheet Microscopy for high resolution volumetric imaging in turbid specimen (SURE-ALISM)

Start date: Sep 15, 2014, End date: Sep 14, 2016,

"Rapid high contrast imaging in combination with low light exposure makes light sheet microscopy particularly attractive for studying the three-dimensional development of biological specimens. Currently however, the highest resolution of light sheet microscopy can only be achieved with relatively transparent samples. To study more advanced stages of development, of particular interest in brain ima ...
Read Project

 1

 FINISHED 

Mid InfraRed Innovative lasers For Improved SENSor of hazardous substances (MIRIFISENS)

Start date: Sep 1, 2012, End date: Aug 31, 2016,

The mid-infrared (MIR) region is emerging as the favourite wavelength band for a number of applications, including high sensitivity trace detection, chemical emission monitoring, process control, and biological sensing applications. An efficient way to get precise and reliable information is to rely on spectroscopic analysis and, among the existing technologies, Tunable Diode Laser Spectroscopy (T ...
Read Project

 18

 FINISHED 

Critical System Engineering Acceleration (CRYSTAL)

Start date: May 1, 2013, End date: Jul 31, 2016,

CRYSTAL aims at fostering Europe’s leading edge position in embedded systems engineering in particular regarding quality and cost effectiveness of safety-critical embedded systems and architecture platforms.Its overall goal is to enable sustainable paths to speed up the maturation, integration, and cross-sectoral reusability of technological and methodological bricks of the factories for safety-cr ...
Read Project

 70

 FINISHED 

Multi-Robot Cognitive Systems Operating in Hospitals (MOnarCH)

Start date: Feb 1, 2013, End date: Mar 31, 2016,

Description MOnarCH targets the development of a novel framework to model mixed human-robot societies, and its demonstration using a network of heterogeneous robots and sensors, in the pediatric area of an oncological hospital. It will handle uncertainties introduced by people and robots, generate natural interactions and engage in edutainme ...
Read Project

 9

 FINISHED 

Trilogy 2: Building the Liquid Net (Trilogy 2)

Start date: Jan 1, 2013, End date: Dec 31, 2015,

This Trilogy 2 project is a 3-year Small or medium-scale focused research project (STREP) targeting Challenge 1 of the 7th FrameworkProgramme: "Pervasive and Trusted Network and Service Infrastructures".The project scope lies entirely within Objective 1.1, "Future Networks"and in particular in bullet c) Novel Internet architectures, management and operation frameworks.The aim of the project is to ...
Read Project

 11

 FINISHED 

Smart technology for artificial muscle applications in space (STAMAS)

Start date: Jan 1, 2013, End date: Dec 31, 2015,

In the context of European Space Policy and its requirements regarding achieving solid technological basis and industry competitiveness, SMEs play an integral role in the research and development of new technology. To prepare for the long-term expeditions of space programmes, some critical factors should be taken into account before the launching: ensuring that astronauts are mentally and physical ...
Read Project

 6

 FINISHED 

Application of a new “green” sol-gel product using an original, versatile, accurate and in-line mixing device that improves the adhesion of paint on aeronautical sector products (GreenGELAIR)

Start date: Oct 1, 2013, End date: Sep 30, 2015,

GreenGELAIR aims at developing a two component sol-gel product to be applied on spray or stick/brush device to improve paint adhesion on large surface for OEM or MRO situations.It will be done through:• Development of a new and competitive formulation of sol gel product based on hybrid organic-inorganic system. It will be competitive compared to commercial products regarding induction time, pot li ...
Read Project

 3

 FINISHED 

Microeconomic and macroeconomic implications of firms' internationalization and innovation strategies: the role of demand and informational barriers (INTINN)

Start date: Oct 1, 2013, End date: Sep 30, 2015,

The aim of this project is to investigate on one side, whether and how trade may induce innovation by existing firms, with particular attention to product innovation and competition strategies; on the other side, it aims at giving some insights on the relationship between firms’ heterogeneity and the aggregate effects of trade liberalization in the developed economies, taking into account the comp ...
Read Project

 1

 FINISHED 

Connectivity management for eneRgy Optimised Wireless Dense networks (CROWD)

Start date: Jan 1, 2013, End date: Jun 30, 2015,

Wireless traffic demand is currently growing exponentially. This growing demand can only be satisfied by increasing the density of points of access and combining different wireless technologies. Mobile network operators have already started to push for denser, heterogeneous deployments; however, current technology needs to steer towards efficiency, to avoid unsustainable energy consumption and net ...
Read Project

 11

 FINISHED 

Leone: From global measurements to local management (LEONE)

Start date: Sep 1, 2012, End date: Apr 30, 2015,

The Leone project is a 30-month long STREP targeting "Future Networks" within the 7th Framework programme. The project addresses "Novel Internet architectures, management and operation frameworks".The goal of the Leone project is to research and develop an innovative network management framework that has two novelties:• It is focused on Quality of Experience: Probes sited alongside end use ...
Read Project

 10

 FINISHED 

Interworking and JOINt Design of an Open Access and Backhaul Network Architecture for Small Cells based on Cloud Networks (iJOIN)

Start date: Nov 1, 2012, End date: Apr 30, 2015,

Motivation. The last decades brought an exponential increase in mobile traffic volume. This will continue and a 1000-fold increase by 2020 has been forecasted. Small-cells promise to provide the required data rates through an increased spatial utilisation of the spectrum.Problem statement. Due to strong inter-cell interference, small-cell deployments will require a high degree of coordination as o ...
Read Project

 12

 FINISHED 

SOCIAL ECOSYSTEM FOR ANTI-AGING, CAPACITATION AND WELLBEING (SEACW)

Start date: Feb 4, 2013, End date: Mar 31, 2015,

Description The objective of the project is to create an ecosystem including tools for the provision of training, literacy, information and awareness in the area of ICT for active and healthy aging. There are two main target groups: agents for social inclusion, and the elderly and the general population. For the first target group, agents of ...
Read Project

 9

 FINISHED 

Nanostructured Lithium Conducting Materials (NANOLICOM)

Start date: Jan 1, 2011, End date: Dec 31, 2014,

Solid State Ionics, as an interdisciplinary science, covers chemistry, physics and materials science. The applied perspectives, that include high-energy-density batteries, fuel cells, electrolysis cells, chemical sensors, electrochromic devices and solar cells, and the need for their improvements are an important catalyst for designing new materials. Besides these attractive applications, academic ...
Read Project

 4

 FINISHED 

Improved magnets for energy generation through advanced tidal technology (MAGNETIDE)

Start date: Dec 1, 2012, End date: Nov 30, 2014,

Gearless generators are of increasing interest and turbine system manufacturers are looking into gearless energy systems projecting onto 2015. Gear operates on mechanical engagement and friction which implies loss of energy and mechanical damage on parts in long term. Gearless generators, on the other hand, are possible by employing magnets, for which powder metallurgy (PM) and most notably powder ...
Read Project

 7

 FINISHED 

Large-scale, Cross-lingual Trend Mining and Summarisation of Real-time Media Streams (TrendMiner)

Start date: Nov 1, 2011, End date: Oct 31, 2014,

The recent massive growth in online media and the rise of user-authored content (e.g weblogs, Twitter, Facebook) has lead to challenges of how to access and interpret these strongly multilingual data, in a timely, efficient, and affordable manner. Scientifically, streaming online media pose new challenges, due to their shorter, noisier, and more colloquial nature. Moreover, they form a temporal st ...
Read Project

 13

 FINISHED 

"Intelligent Information System Supporting Observation, Searching and Detection for Security of Citizens in Urban Environment" (INDECT)

Start date: Jan 1, 2009, End date: Jun 30, 2014,

"The main objectives of the INDECT project are: • to develop a platform for: the registration and exchange of operational data, acquisition of multimedia content, intelligent processing of all information and automatic detection of threats and recognition of abnormal behaviour or violence, • to develop the prototype of an integrated, network-centric system supporting the operational activities of ...
Read Project

 18

 FINISHED 

Innovative Changes in Air transport Research for Universally designed Services (ICARUS)

Start date: Jun 1, 2012, End date: Jun 30, 2014,

"Freedom of movement is a right preserved under EU treaties and it is also aligned with the UN Convention on the Rights of Persons with Disabilities. However, regarding accessibility to air transport for disabled people and the elderly, these basic rights are currently not fully realized, thus creating social exclusion.ICARUS aims to identify, justify and prioritise research and analysis solutions ...
Read Project

 6

 FINISHED 

EURAXLES: Minimizing the risk of fatigue failure of railway axles (EURAXLES)

Start date: Nov 1, 2010, End date: Apr 30, 2014,

"EURAXLES is a 3 year R&D project uniting 23 partners across Europe including 6 axle manufacturers, 4 railway operators/IMs, 2 system integrators, 3 technology suppliers, 5 universities, 2 rail sector associations and 1 consulting firm. The consortium is well-positioned to provide a common R&D approach to axle design, protection, inspection and maintenance which will have an impact on standards, r ...
Read Project

 24

 FINISHED 

Aeronautical Magnetic Gear Box (MAGBOX)

Start date: Sep 1, 2012, End date: Apr 30, 2014,

"A magnetic gearbox for use in the aerospace industry will be designed, built and tested (to obtain a TRL6) as requested in topic SFWA-01-048. The process of optimizing the magnetic gear will include considering different available configurations for magnetic gear types, i.e. planetary, direct and “harmonic drive”. As requested, it will also consider torque, weight, cost, working temperature and r ...
Read Project

 1

 FINISHED 

Magnetic-Superconductor Cryogenic Non-contact Harmonic Drive (MAGDRIVE)

Start date: Feb 1, 2011, End date: Jan 31, 2014,

"The objective of this project is to design and build a harmonic drive able to work under cryogenic conditions, with an extremely low friction, long life time and no wear.This harmonic drive will achieve a great reduction ratio, being able to function at cryogenic temperatures and based on a non-contact interaction between magnets, soft magnetic materials and superconductors. The drive will not u ...
Read Project

 7