Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 ONGOING 
Where in the universe are heavy elements synthesized? How are these elements produced? These are two exciting and interdisciplinary questions in nuclear astrophysics today and will be investigated in my ERC project EUROPIUM. The favored astrophysical sites are neutrino-driven winds following core-collapse supernovae and neutron star mergers, where extreme conditions enable the rapid neutron captur ...
Read Project

 2

 ONGOING 
The commercialization of low temperature fuel cells is restricted by the high cost and low durability of cathode catalysts. Intense efforts have been devoted to tackle this issue by engineering the structure of Pt-based catalysts. Herein, a novel concept towards enhancing the performance of low temperature fuel cell catalysts is proposed, namely by tuning the local active site microenvironment wit ...
Read Project

 2

 ONGOING 
A novel concept for a photo-electro-catalytic (PEC) cell able to directly convert water and CO2 into fuels and chemicals (CO2 reduction) and oxygen (water oxidation) using exclusively solar energy will be designed, built, validated, and optimized. The cell will be constructed from cheap multifunction photo-electrodes able to transform sun irradiation into an electrochemical potential difference (e ...
Read Project

 15

 ONGOING 

Goal-based Open-ended Autonomous Learning Robots (GOAL-Robots)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

This project aims to develop a new paradigm to build open-ended learning robots called `Goal-based Open-ended Autonomous Learning' (GOAL). GOAL rests upon two key insights. First, to exhibit an autonomous open-ended learning process, robots should be able to self-generate goals, and hence tasks to practice. Second, new learning algorithms can leverage self-generated goals to dramatically accelerat ...
Read Project

 5

 ONGOING 

Policy Learning of Motor Skills for Humanoid Robots (SKILLS4ROBOTS)

Start date: Jul 1, 2015, End date: Jun 30, 2020,

The goal of SKILLS4ROBOTS is to develop a autonomous skill learning system that enables humanoid robots to acquire and improve a rich set of motor skills. This robot skill learning system will allow scaling of motor abilities up to fully anthropomorphic robots while overcoming the current limitations of skill learning systems to only few degrees of freedom. To achieve this goal, it will decompose ...
Read Project

 2

 ONGOING 
CELTA: Convergence of Electronics and Photonics Technologies for Enabling Terahertz Applications aims to produce the next generation of researchers who will enable Europe to take a leading role in the multidisciplinary area of utilizing Terahertz technology for applications involving components and complete systems for sensing, instrumentation, imaging, spectroscopy, and communications. All these ...
Read Project

 13

 ONGOING 

High-Intensity Coherent Nonlinear Optics (HICONO)

Start date: Oct 1, 2015, End date: Sep 30, 2019,

Optical laser-based technologies are a key technology of the 21st century. Extension of the range of scientific and commercial laser applications requires a constant expansion of the accessible regimes of laser operation. Concepts from nonlinear optics, driven with ultra-fast lasers provide all means to achieve this goal. However, nonlinear optics typically suffer from low efficiencies, e.g. if hi ...
Read Project

 9

 ONGOING 
The demand for lower dependency on critical raw materials (CRM) such as rare earths (RE) is not only a European but a global problem that demands immediate action. The purpose of this project is to exploit advanced theoretical and computation methods together with state-of-the-art materials preparation and characterization techniques, to develop the next generation RE-free/lean permanent magnets ( ...
Read Project

 18

 ONGOING 
The GEMex project is a complementary effort of a European consortium with a corresponding consortium from Mexico, who submitted an equivalent proposal for cooperation. The joint effort is based on three pillars: 1 – Resource assessment at two unconventional geothermal sites, for EGS development at Acoculco and for a super-hot resource near Los Humeros. This part will focus on understanding the tec ...
Read Project

 26

 ONGOING 

European Network for Cyber-security (NeCS)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

The European Network for Cybersecurity (NECS) was formed in response to the increased need of highly qualified experts able to cope with all the aspects of the European cybersecurity strategy that is currently under implementation.There is indeed an evident need and opportunity to grow a new generation of young researchers able to answer this demand for expertize, trained to the changing nature o ...
Read Project

 8

 ONGOING 
PROTECTIVE is designed to improve an organisations ongoing awareness of the risk posed to its business by cyber security attacks. PROTECTIVE makes two key contributions to achieve this enhanced situational awareness. Firstly it increases the computer security incident response team’s (CSIRT) threat awareness through improved security monitoring and increased sharing of threat intelligence between ...
Read Project

 11

 ONGOING 
Organized Crime and Terrorist Networks (OC/TN) are a major challenge for the European Union and many different stakeholder groups are involved in creating awareness, preventing, identifying and intervene in case of risk or threat. But in order to develop better strategies and instruments, we still need a deeper understanding of these phenomena.TAKEDOWN therefore aims at generating such novel insig ...
Read Project

 19

 ONGOING 
... wareness raising tools that would have a wide application across nations and cultures. Seven partners are committed to the implementation of project activities: Four education/research organizations (Technische Universität Darmstadt - coordinating partner; Utrecht University; PRISMA-Planning and Research Consultants and Szechenyi Istvan University) and three local authorities (the Cities of Darmst ...
Read Project

 7

 ONGOING 
SUPERCONCRETE is a synergetic cross-disciplinary international/intersectoral project addressing theoretical models for next-generation concretes, characterised by a significant sustainability enhancement for the construction industry. Three advanced concrete classes (CCs) are selected which represent the projects’ key research lines:- Low-Carbon Concrete (LCC), characterised by non-conventional co ...
Read Project

 7

 ONGOING 
"ValChem demonstrates the technical and economic viability of sustainable and integrated process from wood to a selected platform chemical and lignin based performance chemicals. ValChem will demonstrate that this process can produce wood-based chemicals that are competitive with identical or similar-in-application products based on fossil raw materials in terms of quality and production cost.Val ...
Read Project

 5

 ONGOING 

Lightweight Verification of Software (LiveSoft)

Start date: Jul 1, 2014, End date: Jun 30, 2019,

As illustrated through the advent of cloud computing, cyberphysical systems, or the Internet of Things, more and more applications are inherently distributed. At the same time, programming distributed systems is notoriously hard. Programmers have to deal with asynchrony and have to cater for partial failures -- the possibility that certain communication(s), processes, or hosts fail while others re ...
Read Project

 2

 FINISHED 

European Circular Energy-Frontier Collider Study (EuroCirCol)

Start date: Jun 1, 2015, End date: May 31, 2019,

The award of the 2013 Nobel Prize for Physics acknowledged the leading role of Europe in particle physics, which has a global community of over 10,000 scientists. To reinforce its pole position throughout the 21st century, Europe must be ready to propose an ambitious post-LHC accelerator project by 2018/19. This is one of the main recommendations of the updated European Strategy for Particle Physi ...
Read Project

 17

 FINISHED 
ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Read Project

 76

 FINISHED 

CORE NOISE ENGINE TECHNOLOGY (CORNET)

Start date: Mar 1, 2016, End date: Apr 30, 2019,

Lean burn combustor technologies introduced to reduce NOx emissions are proving to be inherently noisier than conventional combustors, generating broadband noise that can be heard external to the aircraft. Without careful design and optimisation, there is a danger the low emission cores will cause the aircraft engines to exceed the Horizon 2020 noise requirement. The research in the CORNET propos ...
Read Project

 4

 FINISHED 
In recent years, the majority of the world's Critical Infrastructures CIs evolved to become more flexible, cost efficient and able to offer better services and conditions for business opportunities. Towards this evolution, CIs and companies offering CI services had to adopt many of the recent advances of the Information and Communication Technologies (ICT) field. This adaptation however, was rathe ...
Read Project

 14

 FINISHED 

MYRRHA Research and Transmutation Endeavour (MYRTE)

Start date: Apr 1, 2015, End date: Mar 31, 2019,

The Strategic Research Agenda of the EU Sustainable Nuclear Energy Technical platform requires new large infrastructures for its successful deployment. MYRRHA has been identified as a long term supporting research facility for all ESNII systems and as such put in the high-priority list of ESFRI. The goal of MYRTE is to perform the necessary research in order to demonstrate the feasibility of trans ...
Read Project

 28

 FINISHED 
Science2Society creates, pilots and shares good practices, guidelines and training materials that improve awareness and practical performance in seven concrete university-industry-society interfacing schemes especially affected by Science 2.0 and open innovation. It covers a very wide range of interfacing / co-creation approaches (and the synergy between them) and advances far beyond the tradition ...
Read Project

 19

 FINISHED 
FabSpace 2.0 aims at making universities open innovation centres for their region and improving their contribution to the performance of societies. It will concentrate on one innovation area with high expected socio-economic and environmental impact: geodata-driven innovation, by leveraging space data in particular.When Universities must endorse a new role as co-creators of innovations in the cont ...
Read Project

 16

 FINISHED 

ACcelerating Transition in Peri-Urban areaS in East Africa (ACTUS)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

Behind statements and statistics about newly urbanized populations in Africa, behind maps of rapid and unregulated growth and numerous disaster/risk assessments there are real people with compelling tales of coping and adapting capacities to urban challenges brought by the rapid transformation of cities. Their stories often contain more hope, ambition and imagination as portrayed in reports and sc ...
Read Project

 2

 FINISHED 
Despite of their great promise, high-throughput technologies in cancer research have often failed to translate to major therapeutic advances in the clinic. One challenge has been tumour heterogeneity, where multiple competing subclones coexist within a single tumour. Genomic heterogeneity renders it difficult to identify all driving molecular alterations, and thus results in therapies that only ta ...
Read Project

 10

 FINISHED 

Combustion for Low Emission Applications of Natural Gas (CLEAN-Gas)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Natural Gas (NG) will be one of the key parameters of the EU energy policy for the next decades. EU gas imports are expected to reach over 80% of total consumption by 2030. Thus, the EU is investing heavily in natural gas equipment. Natural gas combustion has two side effects: the production of greenhouse gases and the emission of pollutants. Conventional techniques used to reduce these emissions ...
Read Project

 5

 FINISHED 

RNA-based technologies for single-cell metabolite analysis (MetaRNA)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Metabolism is the foundation of all living organisms. While cells in a population are often phenotypically different, most of our current analytical approaches still probe metabolism only at the population level. Because strong evidence exists that metabolic cell-to-cell heterogeneity has, for instance, disease relevance, researcher from MetaRNA will overcome this severe analytical limitation thro ...
Read Project

 11

 FINISHED 
The share of renewable energy is growing rapidly driven by the objective to reduce greenhouse gas emissions. The amount of electric power which can be supplied to the grid depends on the time of the day and weather conditions. A conventional fleet of thermal power plants is required to compensate for these fluctuations before large scale energy storage technologies will be mature and economically ...
Read Project

 23

 FINISHED 
The main objective of this Marie Curie RISE action is to improve and exchange interdisciplinary knowledge of materials design by modelling, materials synthesis, characterization, and materials processing for permanent magnet development to be able to provide a critical raw free permanent magnet to the industry. Permanent magnets are indispensable for many commercial and military applications. Maj ...
Read Project

 6

 FINISHED 

Augmented Reality Formwork Assembly Training

Start date: Dec 1, 2016, End date: Nov 30, 2018,

CONTEXTEuropean Commission lists the main challenges facing construction, among them: -Training: Improving specialised training and making the sector more attractive, in particular for blue-collar workers, technical colleges and universities.-Innovation: More active uptake of new technologies.The project will address those needs by creation of innovative training with the use of Augmented Reality ...
Read Project

 6

 FINISHED 
StratoClim will produce more reliable projections of climate change and stratospheric ozone by a better understanding and improved representation of key processes in the Upper Troposphere and Stratosphere (UTS). This will be achieved by an integrated approach bridging observations from dedicated field activities, process modelling on all scales, and global modelling with a suite of chemistry clima ...
Read Project

 30

 FINISHED 
Europe is the world’s largest manufacturer of machine tools but this position is threatened due to the emergence of Asian countries. However, Europe has world-class capabilities in the manufacture of high-value parts for such competitive sectors like aerospace & automotive and this has led to the creation of a high-technology, high-skill industry. European machine tool builders, part manufacturers ...
Read Project

 12

 FINISHED 

EUropean CERamic MATerials

Start date: Sep 1, 2015, End date: Aug 31, 2018,

The aim the European Ceramic Materials (EUCERMAT) project is to significantly contribute to changing the general opinion about ceramics materials in Europe. As a matter of fact, ceramic materials are too often simply associated to great diffusion materials mainly employed as building materials (covering plates factories, glasses for windows... etc.). This narrow and negative image is the main reas ...
Read Project

 13

 FINISHED 

Jean Monnet Center of Excellence "EU in Global Dialogue"

Start date: Sep 1, 2015, End date: Aug 31, 2018,

European external governance in different policy fields is confronted with global power shifts. Against this background, global dialogue is crucial and there is a need to incorporate expertise on the EU across disciplines. Thus, the objective of CEDI is to establish a regional hub of expertise on the EU’s external relations. Cooperation with Cuba is planned in order to establish EU Studies in the ...
Read Project

 2

 FINISHED 
The proposal establishes a Network - "Crisis, Conflict and Critical Diplomacy: EU Perceptions in Ukraine and Israel/Palestine" (C3EU) - focused on EU images in key issue areas of economy, politics, foreign policy, energy, climate change, RS&I, civil society and culture/education.The EU aims to engage more effectively with 3rd country publics and stakeholders. Ukraine and Israel/Palestine are curre ...
Read Project

 6

 FINISHED 
This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

PRIvacy and Security MAintaining services in the CLOUD (PRISMACLOUD)

Start date: Feb 1, 2015, End date: Jul 31, 2018,

With a current volume of over USD 100 billion and annual growth rates of over 10%, the world-wide market for cloud computing can be considered as the major growth area in ICT. However, big companies and public authorities are reluctant to entrust their most sensitive data to external parties for storage and processing. The reason for their hesitation is clear: There exist no satisfactory approache ...
Read Project

 17

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Open Mining INfrastructure for TExt and Data (OpenMinTeD)

Start date: Jun 1, 2015, End date: May 31, 2018,

Recent years witness an upsurge in the quantities of digital research data, offering new insights and opportunities for improved understanding. Text and data mining is emerging as a powerful tool for harnessing the power of structured and unstructured content and data, by analysing them at multiple levels and in several dimensions to discover hidden and new knowledge. However, text mining solution ...
Read Project

 18

 FINISHED 

Visual Learning and Inference in Joint Scene Models (VISLIM)

Start date: Jun 1, 2013, End date: May 31, 2018,

"One of the principal difficulties in processing, analyzing, and interpreting digital images is that many attributes of visual scenes relate in complex manners. Despite that, the vast majority of today's top-performing computer vision approaches estimate a particular attribute (e.g., motion, scene segmentation, restored image, object presence, etc.) in isolation; other pertinent attributes are eit ...
Read Project

 2