Search for European Projects

23 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Geothermal Technology for €conomic Cooling and Heating (GEOTeCH)

Start date: May 1, 2015, End date: Apr 30, 2019,

The Drilling technology that is currently used for installation of vertical borehole heat exchangers requires capital-intensive equipment that is expensive to mobilize, leads to deteriorated working conditions and requires experienced teams of specialist operatives. Drilling operations also often require significant quantities of drinking quality water and dispose of dirty water and mud. GEOT€CH w ...
Read Project

 16

 FINISHED 
MOEEBIUS introduces a Holistic Energy Performance Optimization Framework that enhances current (passive and active building elements) modelling approaches and delivers innovative simulation tools which (i) deeply grasp and describe real-life building operation complexities in accurate simulation predictions that significantly reduce the “performance gap” and, (ii) enhance multi-fold, continuous op ...
Read Project

 17

 FINISHED 
Tertiary sector buildings sector consume a sizeable proportion of EU total energy consumption and the majority of consumption is directly attributed to the operational phase of the building life-cycle. Occupant behaviour is a major cause of this consumption. OrbEEt proposes an ICT-based framework to induce behaviour change toward energy efficiency by transforming energy measurements into personali ...
Read Project

 10

 FINISHED 

Synergistic Fouling Control Technologies (SEAFRONT)

Start date: Jan 1, 2014, End date: Dec 31, 2017,

Marine biofouling, the unwanted colonization of marine organisms on surfaces immersed in seawater has a huge economic and environmental impact in terms of maintenance requirements for marine structures, increased vessel fuel consumption, operating costs, greenhouse gas emissions and spread of non-indigenous species. The SEAFRONT project will aim to significantly advance the control of biofouling a ...
Read Project

 19

 FINISHED 
17 partners from11 countries covering all building life cycle will develop an innovative Integrated Evolutionary Design Methodology that can allow the stakeholders to predict the current and future energy efficiency of buildings (both at individual level and neighbourhood level) and make better informed decision in optimising the energy performance at building life cycle level, including operati ...
Read Project

 19

 FINISHED 
EcoShopping project aims to build a holistic retrofitting solution for commercial buildings to reduce primary energy consumption down to less than 80kWh/m2 per year and increase the share of RES (Renewable Energy Sources) more than 50% compared to the state of the art. The approach will be systemic by developing (1). Novel thermal insulation solutions using cost effective materials to further redu ...
Read Project

 17

 FINISHED 

EEB ICT ClustERS (EEBERS)

Start date: Feb 1, 2015, End date: Jan 31, 2017,

EEBERS focus on identifying opportunities for synergies in ICT related RTD in the EeB (energy efficient buildings) domain and to engage stakeholders in networking for future RTD and exploitation of results. There areabout 134 EeB direct and indirectly related projects that will be active beyond 2014. From these about 86 are likely to add¬ress ICT as one of their key priorities. – These projects a ...
Read Project

 5

 FINISHED 
PROFICIENT aims to create large business opportunities for SMEs in the construction sector by exploiting the newly emerging process of Collective Self-Organised (CSO) housing for constructing and retrofitting energy-efficient residential districts.PROFICIENT responds to the EU-wide trend of self-organised housing process in order to boost the quality and the scale of energy-efficient buildings. Se ...
Read Project

 17

 FINISHED 
Fresh water of sufficient quality for human consumption is becoming a scarce resource and its availability is a concerning issue in India whose growing wealth and population create increasing needs leading to higher water consumption while quality standards for drinking water are being enhanced. In this context the overall objective of Water4India consists in studying the different centralized and ...
Read Project

 11

 FINISHED 
"The overall aim of the project is to use agricultural waste, mainly residues from olive farming and olive oil production, for the generation of ready-to-use fuels, namely synthetic natural gas (SNG) and diesel, which would be primarily used for energy production for oil manufacturing and as transportation fuel for olive farming. The optimization of the project and the possible addition of differe ...
Read Project

 9

 FINISHED 
SmartHG will develop economically viable Intelligent Automation Software services gathering real-time data about energy usage from residential homes and exploiting such data for intelligent automation pursuing two main goals: minimise energy usage and cost for each home, support the Distribution Network Operator (DNO) in optimising operation of the grid. SmartHG rests on the following four pillars ...
Read Project

 12

 FINISHED 
EEPOS focuses on neighbourhood energy management and decision support systems that will integrate local consumers & producers (prosumers) with the main electrical and heating grids.The objectives are to develop:• Visionary scenarios and business models for neighbourhood energy services for energy trading between prosumers in neighbourhoods and the grid.• Management systems for energy positive neig ...
Read Project

 10

 FINISHED 
Phosphorus is one essential element of life, which can neither be produced synthetically nor substituted by any other substance. Its importance as plant nutrient is emphasized by the huge amount of 975 000 tons of phosphorus annually imported into Europe to sustain good harvests. While phosphorus is a limited fossil element, its extensive recovery from “secondary deposits” is of paramount importan ...
Read Project

 15

 FINISHED 
"Due to barriers that exist in when considering the sustainability of the built environment, optimising energy efficiency in buildings is often a management issue and not one of design. In many cases, it is the organisation responsible for the building that makes the decision with respect to where best to invest their limited resources. For this reason, decision support tools, providing informat ...
Read Project

 12

 FINISHED 

Sounds for Energy Control of Buildings (S4ECoB)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

S4ECoB will develop and deliver a prototype to optimize the existent Building Management Systems (BMS) by means of acquiring, identifying, monitoring, and adding the parameter of "occupancy level" in buildings and surroundings to enhance operations and eliminate unnecessary consumptions of energy for Heating, Ventilation, Air Conditioning, Lighting (HVACL), and other existent production and consum ...
Read Project

 8

 FINISHED 
About 5% of global carbon emissions originate from the manufacturing of cement.According to IEA,cement production generates an average world carbon emission of 0.81 kg CO2 per kg cement produced.Cement related emissions are expected to increase by 260% throughout the 1990‑2050period.As consequence,the global production of cement in 2030 is projected to grow to a level roughly 5 times higher than i ...
Read Project

 6

 FINISHED 

Building Energy Efficiency for Massive market UPtake (BEEMUP)

Start date: Jan 1, 2011, End date: Dec 31, 2014,

BEEM-UP will demonstrate the economic, social and technical feasibility of retrofitting initiatives, drastically reducing the energy consumption in existing buildings, and lay the ground for massive market uptake. BEEM-UP involves the building owners at 3 sites in France, Sweden and the Netherlands to implement an innovative approach to go beyond a 75% reduction in space heat energy consumption, i ...
Read Project

 20

 FINISHED 
The ambition of this project is to enable the utilisation of the full potential of renewable energy (up to covering 100% of the energy demand on district level). In order to reach this goal, the E-hub concept is developed, which is crucial for the implementation of such a large share of renewables. An E-Hub is a physical cross point, similar to an energy station, in which energy and information st ...
Read Project

 19

 FINISHED 
The refurbishing to an energy efficient standard leads to tight buildings (whole envelope: windows, walls, etc.) and affects the indoor climate. In case of refurbishing the inhabitants or users are not adapted to this new situation. Therefore the air exchange rates could be lower than required if no mechanical ventilation is installed or the system performance is not optimised. Then, in trying to ...
Read Project

 15

 FINISHED 
The EE-QUARRY project emerges from the necessity to control a very demanding energy-intensive industry, which characterizes from its high energy demands and enormous CO2 emissions. The goal is to improve energy efficiency and to reduce CO2 on quarries, through the develop of a new and highly effective modeling and monitoring Energy Management System technique. The use of crushed stone could increa ...
Read Project

 12

 FINISHED 
The overall objective of the FC-DISTRICT project is to optimize and implement an innovative energy production and distribution concept for sustainable and energy efficient refurbished and/or new “energy autonomous” districts exploiting decentralized co-generation coupled with optimized building and district heat storage and distribution network. The concept is based on dynamic heat exchange betwee ...
Read Project

 23

 FINISHED 
The principal aim of FloodProBE is to provide cost-effective means for the flood protection and damage mitigation in urban areas. To this end, FloodProBE will develop, test and disseminate technologies, methods, concepts and tools for risk assessment and mitigation, focussing particularly on the adaptation of new and existing buildings (retrofitting) and on infrastructure networks. The three main ...
Read Project

 15

 FINISHED 
Polymer based manufactured components for construction applications have been designed, developed and demonstrated in European projects such as HP FUTURE-Bridge, SAFEFLOOR and MEGAWIND. The results are very promising regarding customer requirements, quality, technical and economical feasibility and the favourable impact of using this kind of composite-based components in terms of sustainability, s ...
Read Project

 19