Search for European Projects

22 European Projects Found

Searched on 125080 European Projects

 ONGOING 
The objective of the SPOTVIEW project is to develop and demonstrate innovative, sustainable and efficient processes and technology components, in order to optimize the use of natural resources, especially water, in three industrial sectors (Dairy, Pulp and Paper and Steel) contributing to 44% of industrial water usage in EU. This resource optimization (including water, energy, raw materials and ad ...
Read Project

 15

 FINISHED 
The project targets the incorporation of advanced functional materials to deliver customised conductive inks and flexible adhesives compatible with high volume manufacturing platforms. Specifically the development of these enabling materials will support high speed roll to roll integration of hybrid and large area electronics to address internet of things opportunities.The consortium will integra ...
Read Project

 14

 FINISHED 
The InSCOPE project will set-up an open access pilot line service for Hybrid TOLAE (H-TOLAE) technologies capable of sampling products at TRL6-7. It positions itself in between R&D and industry and deploys a service for validating potential H-TOLAE products. Manufacturing progresses beyond R&D level (TRL5 towards 6) by improving processes, functionality and reliability allowing sampling at high qu ...
Read Project

 14

 FINISHED 
EPRISE project aims to promote and support Photonics as a KET with focus on Life Science applications in 4 target markets where Europe holds a leading position – Medical Technologies, Pharmaceuticals, Agriculture and Food. Companies developing photonics-based products for these markets face highly specific Go-to-Market challenges such as long time to market adoption, complex regulatory frameworks ...
Read Project

 9

 FINISHED 
... through a consortium of 9 partners, will develop the synthetic processes, process control methods, analytical assays for QA/QC, functional specifications, and best practices, interfacing existing R&D centres of excellence, transfer organisations and private GMP manufacturing facilities (including SMEs) to ensure efficient translation from discovery through to first in man, proof-of-concept studies ...
Read Project

 10

 FINISHED 
“Bringing flexible organic electronics to pilot innovation scale” (PI-SCALE) is a highly needed response to bridge the gap which exists today between promising laboratory scale results of highly efficient flexible OLED modules and mass manufacturing of high value-added products. The project will integrate existing European infrastructures into a “European flexible OLED pilot line”, which will oper ...
Read Project

 14

 FINISHED 
AceForm4.0 will strengthen European leadership in the development and commercialisation of innovative and sustainable formulated products by i) engaging stakeholders and establishing a strategic common vision, European 2025 roadmap for formulated products and an associated implementation plan; and ii) facilitating knowledge exchange activities aiming at the formation of new collaborative value cha ...
Read Project

 7

 FINISHED 
The vision of PilotManu is the upscale of the current mechanical alloying technological facility into a powder manufacturing pilot line by further developing existing IPR-covered results owned by the SMEs in the consortium related to mechanical alloying technology and to innovative powder materials for different applications.The baseline technology that will be upscaled from a technological facili ...
Read Project

 10

 FINISHED 
Despite improved understanding of the links between ecosystem health, provision of ecosystem services and human well-being, further conceptual and empirical work is needed to make the ideas of ecosystem services (ESS) and natural capital (NC) operational. OpenNESS will therefore develop innovative and practical ways of applying them in land, water and urban management: it will identify how, where ...
Read Project

 39

 FINISHED 
PlasCarb has been stimulated by a transnational consortium of R&D performing SMEs in partnership with specialist scientific resource, life cycle thinking experts, industrial customers, and access to risk finance to facilitate future market uptake. It will integrate commerce with research; transforming a widespread urban solid waste environmental problem (140 million tonnes of food and plant waste ...
Read Project

 8

 FINISHED 
NanoMend will pioneer efforts to develop better, more integrated process inspection, cleaning, repair and control systems for nano-scale thin films on large area foils, and will do so in two exemplar vertical supply chains for functionalized polymer-coated paper products and for low cost flexible photovoltaics (PV). The aim is to demonstrate beyond state-of-the-art in-line detection, cleaning an ...
Read Project

 15

 FINISHED 
The project will demonstrate an integrated approach to generate biofuels from algae in a sustainable manner, on an industrial scale. The project will make optimum use of glycerol, a waste material arising from biodiesel production. It will integrate prior high quality research which has been undertaken at national and international levels: both with public support and with private finance. The de ...
Read Project

 11

 FINISHED 
"CIGS solar module technology on rigid glass substrate is already mature and industrial companies are producing hundreds of MWp each year. Bringing flexible CIGS solar modules to industrial maturity will yield the next breakthrough for further cost reduction by taking into account the inherent advantages of thin film technology, e.g. high throughput and large scale coating with less energy and mat ...
Read Project

 12

 FINISHED 
Management and segregation of municipal solid waste (MSW) has been increasingly imposed on individuals, with highly variable impacts. Waste2Go will valorise this heterogeneous material that has significant socio-economic costs. It will involve the innovative transformation of over 55% of MSW, the biogenic fraction, into renewable chemicals, advancing beyond current approaches to bio-refining whic ...
Read Project

 8

 FINISHED 

NESME Inn

Start date: Jul 1, 2014, End date: Dec 31, 2014,

Key account management for Instruments seeking to enhance innovation management capacities in the North East of England
Read Project

 2

 FINISHED 

Commercialization Clusters of OLAE (COLAE)

Start date: Sep 1, 2011, End date: Aug 31, 2014,

The main objective of this coordinated action is to promote the commercial exploitation of OLAE (organic and large-area electronics) technology for the benefit of European industry and business and for the welfare of European countries. Through the efforts of COLAE we will be able to provide to European companies effective access to the knowledge base and technology know-how of key European OLAE ...
Read Project

 21

 FINISHED 

Fabric structures for solar power generation (FabriGen)

Start date: Nov 1, 2011, End date: Apr 30, 2014,

The proposed project: Fabric Structures for Solar Power Generation (FabriGen), addresses the need to bring innovative products to the solar energy market to achieve the ambitious European targets for renewable energy generation. The FabriGen project aims to combine organic photovoltaic (OPV) materials with tensile fabrics to enable the construction of solar-power generating fabric structures. Thes ...
Read Project

 9

 FINISHED 

Innovation for Digital Fabrication (Diginova)

Start date: Mar 1, 2012, End date: Feb 28, 2014,

... Digital Fabrication. The project consortium, consisting of 4 large companies, 7 SMEs and 9 research institutes will identify and connect main stakeholders through establishment of innovation networks centred around concrete business cases to determine the added value and feasible routes to commercialization.The DIGINOVA consortium has broad research and development experience covering a wide range ...
Read Project

 22

 FINISHED 

Sustainable Hydrogen Generation (SUSHGEN)

Start date: Dec 1, 2009, End date: Nov 30, 2013,

"Water arguably is the only true renewable source of hydrogen fuel. However extraction of the hydrogen requires significant energy input; either thermal, electrical or light. By utilizing a renewable electrical energy source, water electrolysis offers a practical route to sustainable hydrogen production. The coupling of electrolysis with renewable electrical energy (e.g. from wind) enables the ful ...
Read Project

 8

 FINISHED 

Enhanced Nano-fluid Heat Exchange (NanoHex)

Start date: Sep 1, 2009, End date: Feb 28, 2013,

... t of this knowledge will enable engineers to readily design heat systems using nanofluid coolants. The most promising application opportunities for nanofluid coolants reside in large information data centres containing computer servers and racks, power electronics and power electronics for electric drives. The project will stimulate and accelerate the industrial take-up of nanofluid coolants used ...
Read Project

 10

 FINISHED 
"Today’s technicians and students are the next generation of potential fuel cell users and designers, and education now is a critical step towards the widespread acceptance and implementation of hydrogen fuel cell technology in the near future.Development of training initiatives for technical professionals will be started aiming to secure the required mid- and long-term availability of human resou ...
Read Project

 9

 FINISHED 
The NanoCom coordinated action will contribute to bridging the gap between lab based and industrial applications in nanotechnology by creating a European wide approach and mechanisms for lowering the barriers and spreading best open innovation practices for rapid commercialisation and investment in innovative nanotechnology driven products. The vision will be supported by the following key objecti ...
Read Project

 17