Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
...n the Arctic and beyond. APPLICATE will address this challenge and develop enhanced predictive capacity by bringing together scientists from academia, research institutions and operational prediction centres, including experts in weather and climate prediction and forecast dissemination. APPLICATE will develop a comprehensive framework for observationally constraining and assessing weather and cli ...
Read Project

 16

 FINISHED 
For decades, most of the aviation research activities have been focused on the reduction of noise and NOx and CO2 emissions. However, emissions from aircraft gas turbine engines of non-volatile PM, consisting primarily of soot particles, are of international concern today. Despite the lack of knowledge toward soot formation processes and characterization in terms of mass and size, engine manufactu ...
Read Project

 18

 FINISHED 
The objective of the project IMPROOF is to drastically improve the energy efficiency of steam cracking furnaces by at least 20%, in a cost effective way, while simultaneously reducing emissions of greenhouse gasses and NOx per ton ethylene produced by at least 25%. One important way to reduce the energy input in steam cracking furnaces is to reduce coke formation on the reactor wall. The use of ei ...
Read Project

 11

 FINISHED 
The goal of PRIMAVERA is to deliver novel, advanced and well-evaluated high-resolution global climate models (GCMs), capable of simulating and predicting regional climate with unprecedented fidelity, out to 2050. This capability will deliver innovative climate science and a new generation of advanced Earth System Models. Sector-specific end-users in policy and business will be identified and engag ...
Read Project

 19

 FINISHED 

Excellence in SImulation of Weather and Climate in Europe (ESiWACE)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

...iWACE leverages two established European networks, namely (1) the European Network for Earth System modelling, representing the European climate modelling community and (2) the world leading European Centre for Medium-Range Weather Forecasts. The governance structure that defines the services to be provided will be driven by the European weather and climate science community.Weather and climate co ...
Read Project

 16

 FINISHED 

Energy oriented Centre of Excellence for computer applications (EoCoE)

Start date: Oct 1, 2015, End date: Sep 30, 2018,

The aim of the present proposal is to establish an Energy Oriented Centre of Excellence for computing applications, (EoCoE). EoCoE (pronounce “Echo”) will use the prodigious potential offered by the ever-growing computing infrastructure to foster and accelerate the European transition to a reliable and low carbon energy supply. To achieve this goal, we believe that the present revolution in hardwa ...
Read Project

 14

 FINISHED 
AFLoNext is a four year EC L2 project with the objective of proving and maturing highly promising flow control technologies for novel aircraft configurations to achieve a quantum leap in improving aircraft’s performance and thus reducing the environmental footprint. The project consortium is composed by forty European partners from fifteen countries. The work has been broken down into seven work p ...
Read Project

 41

 FINISHED 
The ability to simulate aerodynamic flows using CFD methods has progressed rapidly over the last decades and has given rise to a change in design processes in aeronautics already. But more improvement is necessary to overcome the (still) existing lack in confidence in CFD usage, based on turbulence modelling. The TILDA project will offer methods and approaches combining advanced and efficient high ...
Read Project

 12

 FINISHED 

EUDAT2020

Start date: Mar 1, 2015, End date: Feb 28, 2018,

...search discipline to preserve, find, access, and process data in a trusted environment, as part of a Collaborative Data Infrastructure (CDI) conceived as a network of collaborating, cooperating centres, combining the richness of numerous community-specific data repositories with the permanence and persistence of some of Europe’s largest scientific data centres. EUDAT2020 builds on the foundations ...
Read Project

 36

 FINISHED 
"INTECOCIS is a project on energy production by combustion built by IMFT (experiments, theory and instabilities) and CERFACS (numerical simulation). Combustion produces 90 percent of the earth energy and will remain our first energy source for a long time. Optimizing combustors is a key issue to burn fossil and renewable fuels more efficiently but also to replace wind or solar energy production on ...
Read Project

 2

 FINISHED 

European Reanalysis of the Global Climate System (ERA-CLIM2)

Start date: Nov 11, 2013, End date: Jan 1, 2018,

Production of an extended climate reanalysis of the 20th century, with consistent descriptions of the global atmosphere, ocean, land-surface, cryosphere, and the carbon cycle. Production of a new reanalysis of the satellite era with near-real time data updates for climate monitoring. Research and development in various aspects of coupled data assimilation to improve the use of observations in futu ...
Read Project

 16

 FINISHED 
Tropical Atlantic climate recently experienced pronounced shifts of great socio-economic importance. The oceanic changes were largest in the eastern boundary upwelling systems. African countries bordering the Atlantic strongly depend upon their ocean - societal development, fisheries, and tourism. They were strongly affected by these climatic changes and will face important adaptation challenges a ...
Read Project

 30

 FINISHED 
The central goal of JERONIMO is the understanding of the physical mechanisms of ultrahigh bypass ratio (UHBR) engines with a bypass ratio (BPR) larger than 12 and the related installed jet noise with potential jet-wing interaction. The aim is to reduce uncertainties in jet noise characterisation of this novel installation configuration by wind tunnel tests and predictions and being able to derive ...
Read Project

 13

 FINISHED 

Low Emissions Core-Engine Technologies (LEMCOTEC)

Start date: Oct 1, 2011, End date: Jun 30, 2017,

The main objective of the LEMCOTEC project will be the improvement of core-engine thermal efficiency by increasing the overall pressure ratio (OPR) to up to 70 leading to a further reduction of CO2. Since NOx increases with OPR, combustion technologies have to be further developed, at the same time, to at least compensate for this effect. The project will attain and exceed the ACARE targets for 20 ...
Read Project

 39

 FINISHED 
IS-ENES2 is the second phase project of the distributed e-infrastructure of models, model data and metadata of the European Network for Earth System Modelling (ENES). This network gathers together the European modelling community working on understanding and predicting climate variability and change. ENES organizes and supports European contributions to international experiments used in assessment ...
Read Project

 23

 FINISHED 
The World Meteorological Organization (WMO) sponsored the Global Framework on Climate Services (GFCS) where the need for actionable climate information for periods from several months up to several years for economic, industrial and political planning has been expressed. However, progress in seasonal forecasting has been slow and decadal forecasting is still incipient. At the same time, new model ...
Read Project

 21

 FINISHED 

Climate Information Platform for Copernicus (CLIPC) (CLIPC)

Start date: Nov 11, 2013, End date: Dec 1, 2016,

CLIPC will provide access to climate information of direct relevance to a wide variety of users, from scientists to policy makers and private sector decision makers. Information will include data from satellite and in-situ observations, climate models and re-analyses, transformed data products to enable impacts assessments and climate change impact indicators. The platform will complement existing ...
Read Project

 23

 FINISHED 

Full Aero-thermal Combustor-Turbine interactiOn Research (FACTOR)

Start date: Dec 1, 2010, End date: Nov 30, 2016,

To achieve lower Specific Fuel Consumption (SFC) and CO2/NOx emissions, modern turbomachineries operate at high velocities and high temperature conditions. The lack of confidence in the prediction of combustor-turbine interactions leads to apply extra safety margins on components design. Therefore, the understanding of combustor-turbine flow field interactions is mandatory to preserve High Pressur ...
Read Project

 24

 FINISHED 
Virtual prototyping (VP) is a key technology for environmental friendly and cost effective design in the aircraft industry. However, the underlying analysis and simulation tools (for loads, stresses, emissions, noise), are currently applied with a unique set of input data and model variables, although realistic operating conditions are a superposition of numerous uncertainties under which the indu ...
Read Project

 22

 FINISHED 
...lti-host EST FP6 programme AeroTraNet, AeroTraNet 2 clusters the complementary expertise of 5 established European academic institutes, 2 EU multi-national companies, 1 SME, and one national research centre to offer structured, flexible, well-integrated, a la carte, doctoral and post-doctoral training programme for the new generation of EU aerodynamics and noise specialists. Six academic partners ...
Read Project

 8

 FINISHED 

Coupled Parallel Simulation of Gas Turbines (COPA-GT)

Start date: Jan 1, 2012, End date: Dec 31, 2015,

"The proposed project COPA-GT has been structured to provide training of a multi-disciplinary and intersectorial nature for young Fellows in Europe in the field of propulsion and electric power generation systems. The young researchers will obtain expertise in gas turbines engine (GT) design, based on fluid and structural mechanics, combustion, acoustics and heat transfer. They will become familia ...
Read Project

 8

 FINISHED 

Research on Core Noise Reduction (RECORD)

Start date: Jan 1, 2013, End date: Dec 31, 2015,

In order to achieve the greening of the European air transport with the deployment of low emission and low noise propulsion systems the reduction of core noise plays an important role. The ability to design low core noise aero-engines requires the development of reliable prediction tools. This development demands extensive research with dedicated experimental test cases and sophisticated numerical ...
Read Project

 21

 FINISHED 

Dynamical Exascale Entry Platform (DEEP)

Start date: Dec 1, 2011, End date: Aug 31, 2015,

DEEP proposes to develop a novel, Exascale-enabling supercomputing platform along with the optimisation of a set of grand-challenge codes simulating applications highly relevant for Europe's science, industry and society. The DEEP System will realise a Cluster Booster Architecture that can cope with the limitations purported by Amdahl's Law. It will serve as proof-of-concept for a next-generation ...
Read Project

 18

 FINISHED 

Monitoring Atmospheric Composition and Climate -III (MACC-III)

Start date: Aug 1, 2014, End date: Aug 31, 2015,

MACC-III is the last of the pre-operational stages in the development of the Copernicus Atmosphere Service. Its overall institutional objective is to function as the bridge between the developmental precursor projects - GEMS, PROMOTE, MACC and MACC-II- and the Atmosphere Service envisaged to form part of Copernicus Operations.MACC-III will provide continuity of the atmospheric services provided by ...
Read Project

 39

 FINISHED 

EUropean DATa (EUDAT)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

... agencies that invest in research infrastructures and programmes of research, infrastructure operators and research communities who rely on the availability of data-management services, national data centres and providers of connectivity and, of course, the users who rely on the availability of data and services, innovators who add value to the raw results of scientific research.EUDAT is a three-y ...
Read Project

 28

 FINISHED 

Distributed Research Infrastructure for Hydro-Meteorology (DRIHM)

Start date: Sep 1, 2011, End date: Feb 28, 2015,

Predicting weather and climate and its impacts on the environment, including hazards such as floods and landslides, is still one of the main challenges of the 21st century, with significant societal and economic implications. At the heart of this challenge, as also suggested by the DRIHMS (Distributed Research Infrastructure for Hydro-Meteorology Study) project, lies the ability to have easy acce ...
Read Project

 12

 FINISHED 

Fuel Injector Research for Sustainable Transport (FIRST)

Start date: Dec 1, 2010, End date: Nov 30, 2014,

FIRST will deliver key enabling technologies for combustion emission reduction by developing improved design tools and techniques for modelling and controlling fuel sprays and soot.Aviation’s environmental impact must be reduced to allow sustainable growth to benefit European industry and society. This is captured in ACARE’s 2020 goals of reducing CO2 by 50%, NOx by 80% and in SRA1/2 proposed redu ...
Read Project

 22

 FINISHED 
MACC II (Monitoring Atmospheric Composition and Climate – Interim Implementation) is designed to meet the requirements that have been expressed for prototype operational GMES services for the atmospheric domain. From late-2011 MACC II will continue the operation and development of the GMES service lines established by the MACC project and prepare for its transition in 2014 to become the atmospheri ...
Read Project

 39

 FINISHED 
"The European integrating project COMBINE brings together research groups to advance Earth system models (ESMs) for more accurate climate projections and for reduced uncertainty in the prediction of climate and climate change in the next decades. COMBINE will contribute to better assessments of changes in the physical climate system and of their impacts in the societal and economic system. The pro ...
Read Project

 24

 FINISHED 

Flutter-Free Turbomachinery Blades (FUTURE)

Start date: Jul 1, 2008, End date: Jun 30, 2013,

"FUTURE brings together European and international well reputed centres-of-excellence in order to reach major scientific & technical objectives in striving towards flutter-free turbomachine blades. By advancing the state-of-the-art in flutter prediction capabilities and design rules, the FUTURE project will lead to benefits in terms of decreased development cost, reduced weight and fuel consumptio ...
Read Project

 26

 FINISHED 

"Knowledge for Ignition, Acoustics and Instabilities" (KIAI)

Start date: May 1, 2009, End date: Apr 30, 2013,

"For the time being, the European engine industry does not have at its disposal methodologies adapted to predict the unsteady behaviour of low NOx combustors. Consequently and in order to be able to set up the development of low NOx technologies, KIAI will deliver reliable unstationary CFD tools which will allow a deep comprehension of unsteady phenomena. The main objective of the KIAI project is ...
Read Project

 18

 FINISHED 
"IS-ENES will develop a Virtual Earth System Modelling Resource Centre (V.E.R.C.), integrating the European Earth system models (ESMs) and their hardware, software, and data environments. The overarching goal of this e-infrastructure is to further integrate the European climate modelling community, to help the definition of a common future strategy, to ease the development of full ESMs, to foster ...
Read Project

 20

 FINISHED 

Technologies Enhancement for Clean Combustion in Aero-engines (TECC-AE)

Start date: Jul 1, 2008, End date: Dec 31, 2012,

"Due to continuous efforts through past and ongoing European projects, lean combustion by means of internally staged injectors now appears to be the promising technology for obtaining the required emission reductions compatible with a sustainable growth of aviation transport. (cf ACARE 2020) Recognising that putting into service such a technology as soon as possible is the only way to effectively ...
Read Project

 18

 FINISHED 

GReener Aeronautics International Networking (GRAIN)

Start date: Oct 1, 2010, End date: Dec 31, 2012,

"Aerochina1&2 have been networking projects co-funded by FP7 and AVIC (China) and coordinated by CIMNE. Many of the GRAIN partners have participated in them. These collaborative projects gathered experts on the two Europe (13) and China (17) sides to foster cooperation and debate future trends in the field of integrated multi physics modeling, computer simulations and code validation, experimental ...
Read Project

 18

 FINISHED 
"The IMG4 project CRESCENDO addresses the Vision 2020 objectives for the aeronautical industry by contributing significantly to the fulfilment of three specific targets of the aeronautical industry’s Strategic Research Agenda. CRESCENDO will develop the foundations for the Behavioural Digital Aircraft (BDA), taking experience and results from VIVACE, and integrating these into a federative system ...
Read Project

 59

 FINISHED 
"In LIMOUSINE multi-disciplinary research and training is provided to address the problem and provide tools to design and operate gas turbine engines in a robust way with a diversity of fuels and operation conditions. Their robustness is dependent on their design and operation however. The major risk of failure is due to mechanical failure of combustor components. This failure is most often caused ...
Read Project

 11

 FINISHED 
The MyPlanet collaborative initial training network represents a European initiative to train a new generation of engineers in the field of high performance computing applied to the numerical combustion simulation, energy conversion processes and related atmospheric pollution issues. Indeed, the project is based on the recognised lack on European level of highly skilled engineers that are equally ...
Read Project

 8

 FINISHED 

Aerodynamic loads estimation at extremes of the flight envelope (ALEF)

Start date: May 1, 2009, End date: Apr 30, 2012,

"ALEF's objective is to enable the European aeronautical industry to create complete aerodynamic models of their aircraft based on numerical simulation approaches within the respective development processes. I.e. ALEF will kick-off a paradigm shift from greater confidence in experimentally measured loads data to greater confidence in computational results. Beyond the scope of ALEF this paradigm sh ...
Read Project

 20

 FINISHED 

Monitoring Atmospheric Composition and Climate (MACC)

Start date: Jun 1, 2009, End date: Dec 31, 2011,

"MACC (Monitoring Atmospheric Composition and Climate) is designed to meet the requirements that have been expressed for the pilot Core GMES Atmospheric Service. The project has been prepared by the consortia of the FP6 project GEMS and the GSE project PROMOTE, whose core service lines will provide the starting point for MACC. From mid-2009 MACC will continue, improve, extend, integrate and valida ...
Read Project

 45

 FINISHED 

Common Metadata for Climate Modelling Digital Repositories (METAFOR)

Start date: Mar 1, 2008, End date: Aug 31, 2011,

Climate science plays an increasingly important role for European policy-makers and private sector companies. Basic research and development of effective strategies to mitigate climate change and deal with its impact on society are required, involving a wide range of experts from multiple disciplines. These expert need to access climate data, in particular data from model projections for the next ...
Read Project

 12