Search for European Projects

26 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Multi-sensor automated water quality monitoring and control system for continuous use in recirculation aquaculture systems (AQUALITY)

Start date: Dec 1, 2011, End date: Nov 30, 2014,

EU aquaculture currently produces around 1.3 million tonnes a year, with a value of some EUR 2.9 billion and employs about 65 000 people. This level represents 18 % of EU fish production but only 2 % of world aquaculture production. Catches of wild fish levelled off in the 1980s but between 1973 and 2003 world fish consumption doubled According to FAO estimates 47 % of all fish for human consumpti ...
Read Project

 15

 FINISHED 

Nano- Electrospun Filter for Efficient Liberation & Encapsulation of acticides for water treatment in transportation applications (NEFELE)

Start date: Dec 1, 2011, End date: Nov 30, 2013,

"In recent years, word of aircraft water quality issues has spread, generating negative media coverage, attracting the attention of regulators worldwide, and giving airline passengers a new cause for concern. Health enforcement agencies are currently in the process of drafting new, more stringent quality regulations for aircraft potable water and the world's other regulators will follow suit.Aircr ...
Read Project

 7

 FINISHED 

High Efficiency In Situ Treatment Technology for Contaminated Groundwater (HEISTT)

Start date: Oct 1, 2010, End date: Sep 30, 2013,

"The proposed HEISTT solution is the rapid installation of groundwater treatment chemicals as an insitu subsurface remediation technique, brought about by the use of ultrasonic assisted injection technology to create a closely spaced grid of single treatment small diameter wells to a depth of 20m. As part of the boreholing process, remediation chemicals will be introduced in to the ground containe ...
Read Project

 12

 FINISHED 

Ambulatory Magneto-Enhancement of Transdermal High Yield Silver Therapy (AMETHYST)

Start date: Nov 1, 2009, End date: Aug 31, 2013,

There are approximately 2 million people who suffer from chronic wounds such as venous leg ulcers in Europe at the present time. These wounds typically take between 12 and 24 weeks to heal, but 30% take over two years. This represents a cost to the European healthcare services of at least €8 billion a year in treatment. Two thirds of cases are released immediately for treatment in the community, ...
Read Project

 10

 FINISHED 

Development of a wrist orthotic device for tremor suppression through biomechanical loading by means of a novel rotary actuator (Trem-End)

Start date: Jan 1, 2011, End date: Mar 31, 2013,

In the EU more than 4.25M people aged 40 and over are affected by Essential Tremor (ET), a progressive neurological disorder whose most recognizable feature is a tremor of the arms that is apparent during voluntary movements. ET affects the hand in 90% of the cases and, consequently, everyday tasks and those requiring fine motor skills (such as eating and writing) become very difficult for the pat ...
Read Project

 7

 FINISHED 

"Development of innovative renewable trays for poultry products, based on biopolymers and bast fibers" (TRAYSRENEW)

Start date: Jan 1, 2011, End date: Mar 31, 2013,

"Poultry is considered by consumers as healthy, inexpensive and a nutritious source of protein. Poultry consumption will increase 9,4% by 2015 and the projected consumption and production would increase from 98 Mt in 2009 to 120 Mt in 2017. However, poultry is a highly perishable food and it gets spoiled between 4 up to 10 days. The demand to extend of shelf life has led the industry to develop s ...
Read Project

 11

 FINISHED 

Intelligent combustion management of flue gases for solid fuel domestic heating systems (INTELLi-FLUE)

Start date: Feb 1, 2011, End date: Jan 31, 2013,

Processed and poor quality solid fuels produce highly corrosive flue gases that significantly reduce the lifetime of flue liners. Coupled with increased flue gas temperatures from high efficient solid fuel stoves, flue liners are failing to reduce serious chimney fires. The Intelli-Flue solution will address the issue of highly corrosive flue gases and elevated flue gas temperatures by developing ...
Read Project

 9

 FINISHED 

Anaglyptic Refreshable Photo-Haptic Screen (Anagraphs)

Start date: Jan 1, 2011, End date: Dec 31, 2012,

The scientific and technological developments in the present research project will be to make possible the manufacture of an anaglyptic or tactile display that can be connected to a personal computer or used in stand-alone mode as a Braille e-book reader. The display may be read either by touch or indeed by sight, since the tactile dots will also be illuminated when active. This feature will be of ...
Read Project

 6

 FINISHED 

Cereal Excess as a Renewable Energy Resource (CERES)

Start date: Jan 1, 2011, End date: Dec 31, 2012,

"The present proposal aims at the development of a retrofit-able straw burner with integral scrubber, powered by straw pellets, for use in grain drying. The proposed technology will address EU legislation regarding the use of biomass in heating, emissions of harmful gases, transport emissions, and the common agricultural policy (CAP), as well as the development of a knowledge based economy in line ...
Read Project

 8

 FINISHED 

Highly Flexible Printed ITO-free OPV Modules (HIFLEX)

Start date: Jan 1, 2010, End date: Dec 31, 2012,

HIFLEX aims to develop a cost-effective Highly Flexible Printed ITO-free OPV module technology that matches the particular requirements of mobile and remote ICT applications in terms of efficiency under different light conditions, lifetime, cost structure, power to weight ratio and mechanical flexibility. The project intends to accelerate the exploitation of this OPV technology for a wide variety ...
Read Project

 7

 FINISHED 

An innovative technology platform for the enhanced treatment of industrial wastewaters achieving cost reductions, electricity generation and enabling water reuse for non-potable applications (AquaCell)

Start date: Dec 1, 2010, End date: Nov 30, 2012,

Major water using and discharging industries are of significant European economic importance, generating >€1500 billion turnover and employing >7.5 million people in 220,000 companies (90% SMEs). With continued European growth in demand for water, finite reservoirs of readily-treatable water, rising energy costs and increased environmental legislation, EU industry is experiencing significant compe ...
Read Project

 9

 FINISHED 

Piezo Pair Materials for the Selective Exclusion of Workplace Noise (PiezoSelEx)

Start date: Dec 1, 2010, End date: Nov 30, 2012,

The problem of Noise Induced Hearing Loss (NIHL) in the work place is a problem for SMEs and European workers, particularly in the manufacturing and transport sectors. NIHL results in reduced productivity from lost work days, insurance claims and potential early retirement. Current EU legislation requires employers to provide suitable ear protection for workers exposed to high levels of noise, but ...
Read Project

 9

 FINISHED 

Development of a Retro-Fitted Recycling Unit and Inter-Related Web-Based Logistical Software to Reduce Transport Costs and Improve Competitiveness of Organisations in the Recycling Supply Chain (START)

Start date: Dec 1, 2008, End date: May 31, 2012,

The agricultural sector within the EU generates some 274,000tonnes of plastics waste p.a. of which ~88,000tonnes are agricultural plastics film waste. This equates to 250,000tonnes p.a. with ‘soilage’ (soil/grass/stones/etc). Agricultural plastic film waste has proven difficult to recycle commercially due to the high levels of contamination and its wide geographical dispersion which lead to high t ...
Read Project

 13

 FINISHED 

The development of a graduated radar-absorbing multi-layer structure for wind turbine applications to enable their positioning in areas of optimal power generation (OSGRAM)

Start date: Nov 1, 2009, End date: Apr 30, 2012,

"The EU is committed to generating 20% of it energy from renewable sources by 2020, and 50% by 2050. Wind energy is the cheapest and technologically most straightforward way to generate the majority of this energy. As a result for this the amount of wind energy installed in the EU is predicted to increase from its current level of 56,000 MW to 300,000 MW by 2030, equating to the installation of ov ...
Read Project

 9

 FINISHED 

Development of a cost-effective footwear based on shape memory materials to provide an instant fitting personalization service at the retail shop for enhancing user’s comfort (ShopInstantShoe)

Start date: Dec 1, 2009, End date: Feb 29, 2012,

Foot diseases are recognised as a wide societal problem and the large majority of people affected are women. The hallux valgus (commonly known as bunion) is the most frequent foot deformation affecting one every five women in adult age. This pathology along with others such as hammertoes, claw toes, metatarsalgies and ingrown nails take place at the forefoot and are mainly caused by the prolonged ...
Read Project

 8

 FINISHED 

Novel Injection Moulding Processing for the Production of Low Density Foams based on Innovative Granule Technology (LIGHT-FOAM)

Start date: Dec 1, 2008, End date: Nov 30, 2011,

"Our concept is to enable the production of high quality foams from engineering grade thermoplastics using existing injection moulding and extrusion equipment installed in our SME communities. We propose the creation of a novel polymer processing technology. We will develop the ability to foam engineering grade thermoplastics without the need for chemical blowing agents or speciality moulding equi ...
Read Project

 10

 FINISHED 

A Novel Conductive Surface for Efficient Heating of Bulk Containers and Drums (Safe Heat)

Start date: Apr 1, 2009, End date: Sep 30, 2011,

Over 29m moulded drums and Intermediate Bulk Containers (IBCs) were estimated to have been manufactured in Europe by 2008 with the total number of plastic IBCs manufactured p.a. in Europe in 2008 estimated to be 4m units. Many materials stored in IBCs become viscous at room temperature. These materials can present customers with a number of challenges including:- In the absence of heat, the produc ...
Read Project

 7

 FINISHED 

Sensor-Base Ultrasonic Viscosity Control for the Extrusion of Recycled Plastics (Ultravisc)

Start date: Oct 1, 2009, End date: Sep 30, 2011,

Our aim is to improve processes for the recycling of post-consumer plastic waste, using new technology to compensate for impurities and variations in the physical properties of recycled feedstock. Ultravisc will allow the production of higher grade products from recycled materials, and will reduce costs for plastics recyclers and processors, thus increasing European competitiveness. It will also p ...
Read Project

 8

 FINISHED 

The Development of a Single-Screw Extrusion Process for Production of Low Density Biodegradable PLA Foam for Thermoformed Food Packaging Applications (PLA-FOAM)

Start date: Oct 1, 2009, End date: Sep 30, 2011,

"450 k t p.a. of foamed polymer packaging (mainly expanded polystyrene, EPS) is consumed in the EU with 34% (150 k t p.a.) used for food packaging. Foam packaging is an essential part of the food processing and transport process to prevent damage and spoilage. However, they are made from synthetic polymers and have low density (50 kg/m3) which makes them difficult to recycle economically. Thus, th ...
Read Project

 9

 FINISHED 

Non-toxic and Cost-Effective Essential Oil-based Nematicide and Soil Delivery System (Nemasys)

Start date: Apr 1, 2009, End date: Sep 30, 2011,

Nematodes or roundworms are one of the most common soil-borne parasites that feed on plant roots, stems, leaves, flowers and seeds - constituting a major contributor to agricultural crop losses. Yield losses due to the parasitic affects of nematodes vary significantly for different crops, however, it is estimated that over €1 billion/year of crop yield is lost in the EU and the figure is speculat ...
Read Project

 8

 FINISHED 

"Multi-layer biopolymer films demonstrating selective gas barrier and functional properties suitable for high performance food packaging, derived from integrated bio-refining of sustainable biomass" (BREW-PACK)

Start date: Mar 1, 2009, End date: Aug 31, 2011,

"Conventional biorefineries target production of a single product stream utilising a dedicated crop based feedstock. Such processes offer limited commercial viability, generate significant waste streams and raise ethical and sustainability concerns with regards to the feedstocks used (competition with food crops & genetic modification to improve yield). Paralleling conventional petroleum refinerie ...
Read Project

 10

 FINISHED 

The development of a new more efficient and easy to install high strength solar collector withstanding high temperature (120°)and operating pressures form circulating water and externals (Thermotex)

Start date: Oct 1, 2008, End date: Jun 30, 2011,

This project will target the fast growing market for solar collector systems. The competitiveness of the EU solar collector industry is a major issue in this rapidly increasing market. Currently, European industry is lagging behind the China and US, which exports solar collector components to the EU. Also competition will become increasingly intense, as new players from other low labour cost count ...
Read Project

 10

 FINISHED 

Development of an Integrated System for Cost Effective Temperature Control in Aquaculture Tanks (OptiTEMPtank)

Start date: Dec 1, 2008, End date: Feb 28, 2011,

The proposed project is focused on supporting the 6,000 SMEs that work in the European aquaculture sector and over 50,000 SMEs in our supply chain including; plant installation, tank manufacturers, filtration engineers and temperature control engineers. European aquaculture production has increased substantially over the last decades. However, overall production growth in Europe over the period 19 ...
Read Project

 11

 FINISHED 

A novel modular solar air source heat pump system (SOLARIS)

Start date: Mar 1, 2009, End date: Feb 28, 2011,

"There are 195 million households in Europe whose combined domestic heating needs account for 26% of Europe’s energy demand and 500 billion tonnes of CO2 emissions annually. Reducing this will be important if Europe is to achieve ambitious emission reduction targets, reduce its excessive reliance on imported energy and the decrease costs to households and industry. The most effective way to decent ...
Read Project

 11

 FINISHED 

An Innovative Soft Skinned Fire Resistant Cable for Fire Safety Applications Manufactured Using Integrated Cold Gas Dynamic Spraying and Polymer Extrusion Technologies (Fire Shield)

Start date: Oct 1, 2008, End date: Sep 30, 2010,

There are 2.5 million reported fires, causing 20-25,000 deaths, 250-500,000 injuries and extensive environmental damage each year in the EU. The cost of fire damage to the EU is estimated at 100 billion Euros. Fire safety equipment such as fire alarms and emergency lighting is extremely effective at reducing the damage and cost associated with fires. Fire resistant cabling that transmits power and ...
Read Project

 9

 FINISHED 

"An innovative passive humidification device delivering improved performance, reduced healthcare costs and greater patient care" (HUMID)

Start date: Jun 1, 2008, End date: Aug 31, 2010,

"Humidification is an essential function of the nose and mouth to ensure normal health and function of the respiratory system. During surgery and within the intensive care unit, the patient’s upper airway tract is bypassed to assist breathing and enable controlled delivery of medical gases; and thus artificial means must be used for humidification. The state of the art provides two main devices: a ...
Read Project

 8