Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
To study and understand the aggregation, nucleation, and/or self-assembly processes of crystalline matter is of crucial importance for research and applications in many disciplines. For example, understanding the formation of crystalline amyloid fibres could lead to advances in the treatment and prevention of both Alzheimer’s and Parkinson’s diseases, whereas controlling the process of crystal for ...
Read Project

 2

 FINISHED 

Birth of solids: atomic-scale processes in crystal nucleation (CLUSTER)

Start date: Jun 1, 2016, End date: May 31, 2021,

The goal of this project is to explore the fundamental processes which trigger the nucleation and growth of solids. Condensed matter is formed by clustering of atoms, ions or molecules. This initial step is key for the onset of crystallization, condensation and precipitate formation. Yet, despite of the scientific and technological significance of these phenomena, on an atomistic level we merely h ...
Read Project

 1

 FINISHED 

MEthane goes MObile - MEasurements and MOdelling (MEMO2)

Start date: Mar 1, 2017, End date: Feb 28, 2021,

Mitigation of climate change is a key scientific and societal challenge and also a headline target of the EU2020 strategy. Strong reductions in greenhouse gas emissions are necessary to reach the global warming target agreed on at the 2015 United Nations Convention of Parties in Paris. Such emission reductions can only be achieved if sources are properly quantified and mitigation efforts are verif ...
Read Project

 9

 FINISHED 
Environmental heating is a growing challenge for our community and problems are already experienced by millions of Europeans during the summertime and aggravated during heat waves or occupational settings. In addition to the well-known health risks related to severe heat stress, a number of studies have confirmed significant loss of productivity due to hyperthermia. Even if countries adopt the EU ...
Read Project

 21

 FINISHED 
Chemistry is fundamental to nanotechnology, as chemistry can prepare specifically tailored molecules to serve, in a bottom-up approach, as the building blocks for the fabrication of functional and structured nano-materials. Nanotechnology is the technology of the 21st century with applications from electronics to biotechnology and medicine. The next decade will thus be characterized by an increasi ...
Read Project

 14

 FINISHED 
The main idea of POROUS4APP project is based on the fabrication of functional nanoporous carbonaceous materials at pilot plant scale from natural resources (polysaccharide). The process for nanoporous carbon fabrication is already well known as one of the POROUS4APP partner has developed the STARBON® technology at TRL5 which consist of swelling, drying and pyrolysis of natural resources and in thi ...
Read Project

 11

 FINISHED 
The Research Infrastructure (RI) ACTRIS – Aerosols, Clouds and Trace Gases - is the pan-European RI that consolidates activities amongst European partners for observations of aerosols, clouds, and trace gases and for understanding of the related atmospheric processes, to provide RI services to wide user groups. ACTRIS is composed of 8 connected elements: distributed National Facilities (observatio ...
Read Project

 28

 FINISHED 
STARCELL proposes the substitution of CRM’s in thin film PV by the development and demonstration of a cost effective solution based on kesterite CZTS (Cu2ZnSn(S,Se)4) materials. Kesterites are only formed by elements abundant in the earth crust with low toxicity offering a secure supply chain and minimizing recycling costs and risks, and are compatible with massive sustainable deployment of electr ...
Read Project

 15

 FINISHED 
The objective of the caLIBRAte project is to establish a state-of-the-art versatile Risk Governance framework for assessment and management of human and environmental risks of MN and MN-enabled products. The framework will be a web-based “system-of-systems” linking different models and methods for: 1) screening of apparent and perceived risks and trends in nanotechnology, 2) control banding, quali ...
Read Project

 26

 FINISHED 

FLying ultrA-broadband single-shot InfraRed sensor (FLAIR)

Start date: Nov 1, 2016, End date: Oct 31, 2019,

FLAIR aims at developing an airborne, compact and cost-effective air quality sampling sensor for sensitive and selective detection of molecular fingerprints in the 2-5 μm and 8-12 μm infrared atmospheric windows. The sensor is based on an innovative supercontinuum laser that provides ultra-bright emission across the entire spectrum of interest. Such a light source in combination with a novel type ...
Read Project

 8

 FINISHED 

Nanomaterial FAte and Speciation in the Environment (NanoFASE)

Start date: Sep 1, 2015, End date: Aug 31, 2019,

Concept: NanoFASE will deliver an integrated Exposure Assessment Framework, including methods, parameter values, model and guidance that will allow Industry to assess the full diversity of industrial nano-enabled products to a standard acceptable in regulatory registrations. Methods to assess how use phases, waste streams and environmental compartments (air, soil, water biota) act as “reactors” in ...
Read Project

 39

 FINISHED 
The HORIZON 2020 EURATOM Collaborative Project “Cement-based materials, properties, evolution, barrier functions (Cebama)” is developed with the overall objective to support implementation of geological disposal of nuclear waste by improving the knowledge base for the Safety Case. Cement-based materials are highly relevant in this context, being used as waste forms, liners and structural component ...
Read Project

 28

 FINISHED 

Aerosols, Clouds, and Trace gases Research InfraStructure (ACTRIS-2)

Start date: May 1, 2015, End date: Apr 30, 2019,

ACTRIS-2 addresses the scope of integrating state-of-the-art European ground-based stations for long term observations of aerosols, clouds and short lived gases capitalizing work of FP7-ACTRIS. ACTRIS-2 aims to achieve the construction of a user-oriented RI, unique in the EU-RI landscape. ACTRIS-2 provides 4-D integrated high-quality data from near-surface to high altitude (vertical profiles and t ...
Read Project

 32

 FINISHED 
DESTINATE aims to develop tools and methodologies for railway noise simulation and cost-benefit analysis of mitigation actions of interior and exterior noise. For accurate noise prediction it is essential to characterize the structure-borne and airborne sound sources accurately in order to create valid input for sound prediction simulation models. The calculated interior and exterior noise can be ...
Read Project

 8

 FINISHED 
Prime objective of the Sharc25 project is to develop super-high efficiency Cu(In,Ga)Se2 (CIGS) solar cells for next generation of cost-beneficial solar module technology with the world leading expertise establishing the new benchmarks of global excellence. The project partners ZSW and EMPA hold the current CIGS solar cell efficiency world records of 21.7% on glass and 20.4% on polymer film, achie ...
Read Project

 13

 FINISHED 
"Competition between phases occurring in solid-state reactions in metallic nanosystems is of critical importance in advanced materials technologies. The present Project focuses on materials already being used or are being considered as candidates for application in advanced joining technologies. The principal goals of application are: (i) to tune interface reactions in nano-structured Ni/Al, Ti/Al ...
Read Project

 4

 FINISHED 

Reservoir Computing with Real-time Data for future IT (RECORD-IT)

Start date: Sep 1, 2015, End date: Aug 31, 2018,

The aim of this proposal is to develop an intelligent biocompatible sensing device which detects complex behavioural changes in ion concentrations. The sensor will use wet NOMFETs, coated Si nanowires, self-conjugated polymers, arrays of photocells, flow of lipids. The level of ions will be measured by monitoring changes in the response function of the system. The high sensitivity of the device wi ...
Read Project

 9

 FINISHED 
One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Read Project

 46

 FINISHED 
NANOLEAP project aims at the development of a coordinated network of specialized pilot lines for the production of nanocomposite based products for different civil infrastructure and building applications.The goal of this infrastructure is to support the research activities of European SMEs in the Construction sector in nanocomposite products enabling the progress of the product to next steps of t ...
Read Project

 18

 FINISHED 
SPICY is a collaborative research project associating 5 industrials partners (3 large groups and 2 SME) with 8 academic and research centres to the multidisciplinary development of a new generation of Li-ion batteries meeting the expectations of electrical vehicle end-users, including performances, safety, cost, recyclability and lifetime. For this purpose, SPICY will consider the development of n ...
Read Project

 14

 FINISHED 

Graphene-based disruptive technologies (GrapheneCore1)

Start date: Apr 1, 2016, End date: Mar 31, 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Read Project

 158

 FINISHED 
Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Read Project

 37

 FINISHED 
The ProSUM project will establish a European network of expertise on secondary sources of critical raw materials (CRMs), vital to today’s high-tech society. ProSUM directly supports the European Innovation Partnership (EIP) on Raw Materials and its Strategic Implementation Plan calling for the creation of a European raw materials knowledge base. Data on primary and secondary raw materials are avai ...
Read Project

 17

 FINISHED 
The growth of advanced composites in construction in recent years has been spectacular, doubling in size in the last 10 years. This expansion has been largely due to the use of Fibre Reinforced Polymer reinforcement in structural applications and, although the current economic climate has seen a slowdown of the general construction market, the demand of composite products within the European const ...
Read Project

 14

 FINISHED 
During more than 50 years of the laser existence, they have been proved as the unique tool for diverse material processing application. New application ideas, coming from universities and research institutions, are usually implemented by spin-off companies with limited resources for market penetration. Research laboratories are using universal laser tools, while effective and low-cost production r ...
Read Project

 36

 FINISHED 
RESEEPE will bring together design and decision making tools, innovative building fabric manufacturers and a strong demonstration programme to demonstrate the improved building performance through retrofitting. The core idea of the RESSEEPE project is to technically advance, adapt, demonstrate and assess a number of innovative retrofit technologies. Reductions in the area of 50% will be achieved i ...
Read Project

 27

 FINISHED 

Automated Comparison of X-ray Images for cargo Scanning (ACXIS)

Start date: Sep 1, 2013, End date: May 31, 2017,

The main objectives of the project ACXIS are to develop a manufacturer independent reference data base for X-ray images of illegal and legitimate cargo, procedures and algorithms to uniform X-ray images of different cargo scanners and measurement parameters, and an automated identification of potentially illegal cargo. Historic images of real detections and images of illegal cargo mock-ups as well ...
Read Project

 7

 FINISHED 
The main objective of this research proposal is to identify and elaborate those characteristics of ENM that determine their biological hazard potential. This potential includes the ability of ENM to induce damage at the cellular, tissue, or organism levels by interacting with cellular structures leading to impairment of key cellular functions. These adverse effects may be mediated by ENM-induced a ...
Read Project

 40

 FINISHED 

SUSTAINABLE NANOTECHNOLOGIES (SUN)

Start date: Oct 1, 2013, End date: Mar 31, 2017,

SUN (Sustainable Nanotechnologies) is the first project addressing the entire lifecycle of nanotechnologies to ensure holistic nanosafety evaluation and incorporate the results into tools and guidelines for sustainable manufacturing, easily accessible by industries, regulators and other stakeholders. The project will incorporate scientific findings from over 30 European projects, national and inte ...
Read Project

 38

 FINISHED 
The NanoMILE project is conceived and led by an international elite of scientists from the EU and US with the aim to establish a fundamental understanding of the mechanisms of nanomaterial interactions with living systems and the environment, and uniquely to do so across the entire life cycle of nanomaterials and in a wide range of target species. Identification of critical properties (physico-che ...
Read Project

 30

 FINISHED 
OXIGEN will combine leading-edge European expertise in the manufacture of specialist powder alloys (Mechanical Alloying), knowledge of niche high-temperature materials and capabilities in additive manufacturing. This will produce an integrated, world-leading capability to directly manufacture from powder to part custom-designed, best-in-class high temperature alloys for power generation component ...
Read Project

 11

 FINISHED 
"With the use of more advanced, but difficult-to-cut materials, on ever-more sophisticated products, the need to further develop and utilise the particular capabilities of the energy beam (EB) processing techniques seem to become a key enabler for the European industry. Although they are of various nature, a set of key communalities can be identified among EB methods when considered as dwell-time ...
Read Project

 11

 FINISHED 
"The paints, coatings and varnishes manufacturing sector in Europe is worth an estimated €20billion, supporting approximately 4130 SMEs and is responsible for employing 59,600 people within these SMEs. In particular, the wood coatings sector is facing a number of threats. The sector is coming under increasing pressure from low cost imports from Asia that have low solids content and subsequently po ...
Read Project

 15

 FINISHED 

Empa international postdoctoral fellowship programme (EMPAPOSTDOCS)

Start date: Nov 15, 2011, End date: Nov 14, 2016,

"Empa, a world-class industry-oriented research institution part of the Swiss Federal Institute of Technology Domain, has decided to create a new fellowship programme, the Empa international postdoctoral fellowship programme. EMPAPOSTDOCS is an individual-driven bottom-up incoming trans-national mobility and re-integration programme. It will allow experienced researchers from all over the world to ...
Read Project

 1

 FINISHED 
Bioplastics like PHA are long-term sustainable alternatives because they can show equal performance to conventional petrochemical plastics, originate from renewable non-food resources and are 100% bio-degradable. Although PHA shows better performance than alternative bioplastics (PLA and starch), the market uptake of PHA biosplastics shows the following obstacles: 1) PHA is expensive (>4.5 €/kg), ...
Read Project

 9

 FINISHED 
The aim of ADMACOM (Advanced manufacturing routes for metal/Composite components for aerospace) is to develop innovative manufacturing technologies based on advanced design of interfaces and of joining materials for aerospace components.As an example, an innovative joining technology for Ceramic Matrix Composites (CMC) to metals for aerospace components will be developed.The combination of advance ...
Read Project

 7

 FINISHED 
The main goal of the project is to develop a smart window system that will contribute to meeting the energy efficiency targets of the building industry by 2020. This goal will be achieved through a new vacuum insulation glazing (VIG) solution combined with newly developed and robust switchable glazing systems mounted in durable and energy efficient sash and frame. The Energy Performance of Buildin ...
Read Project

 8

 FINISHED 

The Urban Sound Planner (SONORUS)

Start date: Oct 1, 2012, End date: Sep 30, 2016,

"Traffic noise pollution in urban areas is a major environmental problem within the European Union. Creating an acceptable acoustic outdoor environment is a big challenge of high need. Creating as well as preserving environments, which are supportive for health and well-being in a sustainable manner is an even bigger but unavoidable task. In order to succeed, specialists are required with a broad ...
Read Project

 9

 FINISHED 
"The overall objective of this project is the creation of an ITN network for the structured interdisciplinary training of researchers in advanced thin film photovoltaic (PV) technologies.The project proposes the development of new technologies compatible with the cost, efficiency, sustainability and mass production requirements that are needed to become areliable and future alternative to conventi ...
Read Project

 11

 FINISHED 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Start date: Oct 1, 2013, End date: Mar 31, 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Read Project

 154