Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

BrennerLEC - Brenner Lower Emissions Corridor (LIFE BrennerLEC)

Start date: Sep 1, 2016, End date: Apr 30, 2021,

Background Road transport contributes greatly to the inventory of atmospheric greenhouse gas and air pollution emissions. In general, it is responsible for around 60% of NOx emissions. In regional terms, considering only road transport emissions, traffic on the regional section of the A22 highway causes 41% of NOx emissions. The EU’s ambient Air Quali ...
Read Project

 6

 FINISHED 

REnaissance of Places with Innovative Citizenship and TEchnolgy (REPLICATE)

Start date: Feb 1, 2016, End date: Jan 31, 2021,

The objective of REPLICATE is to demonstrate Smart City technologies in energy, transport and ICT in districts in San Sebastia, Florence and Bristol addressing urban complexity and generate replication plans in other districts and in follower cities of Essen,Nilufer and Lausanne.Main challenges for cities are to increase the overall energy efficiency, to exploit better local resources in terms of ...
Read Project

 37

 FINISHED 

Molecule-to-man pain network (PAIN-Net)

Start date: Feb 1, 2017, End date: Jan 31, 2021,

Neuropathic pain affects 5% of the general population and 40% of patients with neurological diseases, and has a key role in the pathophysiology of cancer pain that affects up to 50% of patients in the early disease stage and 30% of survivors, causing an enormous social burden. Treatments are inadequate with less than 50% of patients achieving 50% of pain relief at best, while up to 30% of cancer p ...
Read Project

 13

 FINISHED 

MULTI-site organic-inorganic HYbrid CATalysts for MULTI-step chemical processes (MULTI2HYCAT)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The main goal of MULTI2HYCAT is to design, obtain proof of concept (2 gr.) and upscale in a pre-pilot reactor (20-50 gr.) a new class of hierarchically-porous organic-inorganic hybrid materials, which will be used as active catalysts to carry out multi-step asymmetric catalytic processes with predominantly high conversions (up to 90%) and selectivity (in the range of 80-90%) towards the desired fi ...
Read Project

 11

 FINISHED 

integrated Smart GRID Cross-Functional Solutions for Optimized Synergetic Energy Distribution, Utilization Storage Technologies (inteGRIDy)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

inteGRIDy aims to integrate cutting-edge technologies, solutions and mechanisms in a scalable Cross-Functional Platform connecting energy networks with diverse stakeholders, facilitating optimal and dynamic operation of the Distribution Grid (DG), fostering the stability and coordination of distributed energy resources and enabling collaborative storage schemes within an increasing share of renewa ...
Read Project

 31

 FINISHED 

EURopean Endeavour for Chimeric Antigen Receptor Therapies (EURE-CART)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Cancer is rapidly becoming the most frequent cause of death in EU. Though enormously expensive (several billions EUR/year), currently available anti-cancer therapies are major causes of chronic diseases. Adoptive immunotherapy with T cells genetically modified with a tumour-reactive chimeric antigen receptor (CAR) is an innovative therapeutic concept, promising to eradicate cancer without causing ...
Read Project

 11

 FINISHED 

Pre-commercial lines for production of surface nanostructured antimicrobial and anti-biofilm textiles, medical devices and water treatment membranes (PROTECT)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

PROTECT aims to introduce to the market One step antimicrobial finish processes for polymeric materials used in i) specialty textiles for public areas and hospitals, ii) water treatment membranes, and iii) implantable medical devices. Compared to main existing manufacturing routes, the proposed one-step coating technologies are simple, fast, and reproducible. For this, PROTECT uses as a starting p ...
Read Project

 23

 FINISHED 

AcceLerate Innovation in urban wastewater management for Climate changE (ALICE)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The challenges facing society in urban wastewater management cannot be solved by any one sector alone. ALICE (AcceLerate Innovation in urban wastewater management for Climate changE) will accelerate innovation by bringing together and exchanging knowledge between the key players who can, together, address the future techno-economic, governance and societal challenges arising from climate change. I ...
Read Project

 13

 FINISHED 

Sharing Cities (SHAR-LLM)

Start date: Jan 1, 2016, End date: Dec 31, 2020,

Sharing Cities has four key objectives. 1) To achieve scale in the European smart cities market by proving that properly designed smart city solutions, based around common needs, can be integrated in complex urban environments. This will be done in a way that exhibits their true potential and allows for the significant scale-up and consequent increase in social, economic and environmental value. ...
Read Project

 36

 FINISHED 

Synthetic bacterial lipid rafts to optimize industrial bioprocesses (Rafts4Biotech)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Genetic tractability of bacterial cells allows generating synthetic microbial chassis platforms (SMCPs) with remarkable biotechnological applications but their functionality currently faces important off-genome limitations due to deficient protein-protein interactions, unfavorable protein stoichiometry or generation of toxic intermediates that ultimately compromise the industrial production proces ...
Read Project

 13

 FINISHED 

High Efficiency Multistage Plasma Thruster – Next Generation (HEMPT-NG)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

HEMPT-NG addresses the topic COMPET-3-2016-a on Incremental Technologies part of the SRC electrical propulsion in line with the EPIC roadmap “to increase the competitiveness of EP systems developed in Europe” by developing an integrated solution based on HEMPT (Highly Efficient Multistage Plasma Thruster) , the fluidic management system, and the power processing unit.The proposed development will ...
Read Project

 10

 FINISHED 

Smart optical and ultrasound diagnostics of breast cancer (SOLUS)

Start date: Dec 1, 2016, End date: Nov 30, 2020,

SOLUS is a trans-disciplinary 48-month project bringing together 9 partners: industries (4), academic and clinical institutions from 5 countries (engineers, physicists and radiologists) representing cutting-edge expertise in their fields, to develop an innovative non-invasive, point-of-care, low-cost, easy-to-operate, multi-modal imaging system (diffuse optics and ultrasounds/shear wave elastograp ...
Read Project

 10

 FINISHED 

Supporting Urban Integrated Transport Systems: Transferable tools for authorities (SUITS)

Start date: Dec 1, 2016, End date: Nov 30, 2020,

SUITS takes a sociotechnical approach to capacity building in Local Authorities and transport stakeholder organisations with special emphasis on the transfer of learning to smaller sized cities, making them more effective and resilient to change in the judicious implementation of sustainable transport measures. Key outputs will be a validated capacity building program for transport departments, an ...
Read Project

 21

 FINISHED 

Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks (VOLATILE)

Start date: Dec 1, 2016, End date: Nov 30, 2020,

VOLATILE aims in the development of an innovative Volatile Fatty Acids Platform for the bioconversion of municipal solid bio-waste fraction and sludgy biowaste from other industries. The platform will be integrated in anaerobic digestion. The volatile fatty acids will be recovered continuously using sophisticated membrane technology and will be provided as feedstock / carbon source for value added ...
Read Project

 21

 FINISHED 

Nature Based Solutions for re-naturing cities: knowledge diffusion and decision support platform through new collaborative models (Nature4Cities)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

Based on a detailed mapping of urban challenges and relevant nature-based solutions (NBS), Nature4Cities aims at developing complementary and interactive modules to engage urban stakeholders in a collective-learning process about re-naturing cities, develop and circulate new business, financial and governance models for NBS projects, as well as provide tools for the impacts assessment, valorisatio ...
Read Project

 26

 FINISHED 

European AIDS Vaccine Initiative 2020 (EAVI2020)

Start date: Nov 1, 2015, End date: Oct 31, 2020,

HIV-1 is responsible for a global pandemic of 35 million people, and continues to spread at a rate of >2 million new infections/year. It is widely acknowledged that a protective vaccine would be the most effective means to reduce HIV-1 spread and ultimately eliminate the pandemic, while a therapeutic vaccine may help mitigate the clinical course of disease and lead to strategies of viral eradicati ...
Read Project

 27

 FINISHED 

Re-establishment of the Ribbed Limpet (Patella ferruginea) in Ligurian MPAs by Restocking and Controlled Reproduction (RE.LIFE)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

Background The geomorphological features of the Portofino MPA promontory favour the development of a rich and highly diversified benthic fauna and flora. The area hosts the most important shallow-water coral population of the Ligurian Sea and contains significant gorgonian populations. The fish community includes such species as the brown grouper, brown m ...
Read Project

 7

 FINISHED 

Agri and food waste valorisation co-ops based on flexible multi-feedstocks biorefinery processing technologies for new high added value applications (AgriMax)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

Approximately one third of all food produced globally is wasted every year throughout the whole value chain-from farmers to consumers. To extract the significant amounts of valuable compounds contained in these wastes, AgriMax will combine affordable and flexible processing technologies (ultrasound assisted and solvent extraction, filtration, thermal and enzymatic treatments) for the valorization ...
Read Project

 30

 FINISHED 

Robust and Reliable technology concepts and business models for triggering deep Renovation of Residential buildings in EU (4RinEU)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

4RinEU will define robust, cost-effective, tailorable deep renovation technology packages supported by usable methodologies, feeding into reliable business models. The project will minimize failures in design and implementation, manage different stages of the deep renovation process, from the preliminary audit up to the end-of-life, and provide information on energy, comfort, users’ impact, and in ...
Read Project

 13

 FINISHED 

Integrated Zero Defect Manufacturing Solution for High Value Adding Multi-stage Manufacturing systems (ForZDM)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

"Manufacturing companies are continuously facing the challenge of operating their manufacturing processes and systems in order to deliver the required production rates of high quality products of increasing complexity, with limited use and waste of resources. "Zero Defect Manufacturing" (ZDM) is a recent paradigm aiming at going beyond traditional six-sigma approaches in highly technology intensiv ...
Read Project

 13

 FINISHED 

Cost-Effective Recycling of CDW in High Added Value Energy Efficient Prefabricated Concrete Components for Massive Retrofitting of our Built Environment (VEEP)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

Around 461 million ton/year of C&DW are generated in EU28. Recent studies on the characterization of C&DW samples at European level revealed a predominant fraction of concrete (52% average). Over the last years, novel technology has been developed aiming to guarantee high quality recycled concrete aggregates for use in new concrete, thereby closing the concrete loop. The most advanced concrete re ...
Read Project

 15

 FINISHED 

Zero Waste Ligno-Cellulosic Biorefineries by Integrated Lignin Valorisation (Zelcor)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

Zelcor project aims at demonstrating the feasibility of transforming lignocellulose biorefinery recalcitrant side streams into high added-value biobased products, including fine chemicals. Its concept is to combine chemical and enzymatic catalysis with insects-based biological conversion, within a biorefinery integrated approach. The project is conceived to avoid waste production by recycling wast ...
Read Project

 18

 FINISHED 

Innovative approaches to turn agricultural waste into ecological and economic assets (NoAW)

Start date: Oct 1, 2016, End date: Sep 30, 2020,

NoAW : No Agro-Waste.Innovative approaches to turn agricultural waste into ecological and economic assets.Driven by a “near zero-waste” society requirement, the goal of NoAW project is to generate innovative efficient approaches to convert growing agricultural waste issues into eco-efficient bio-based products opportunities with direct benefits for both environment, economy and EU consumer. To ach ...
Read Project

 32

 FINISHED 

A DECentralIzed management Scheme for Innovative Valorization of urban biowastE (DECISIVE)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

The growing attractiveness of cities leads to increasing population, thus rising energetic and food demands in urban areas. This makes urban waste management increasingly challenging, both in terms of logistics and environmental or health impacts. To decrease the cities’ environmental impacts and to contribute to a better resilience of urban areas towards energy or food supply crisis, waste manage ...
Read Project

 13

 FINISHED 

Innovative Micro Solar Heat and Power System for Domestic and Small Business Residential Buildings (Innova MicroSolar)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

Rapid expansion of utilisation of solar thermal energy for increasing energy efficiency of buildings have been adopted in short/medium- and long-term Energy Strategies of EU countries in line with regional actions with the European climate energy objectives as defined in the European Union’s “20-20-20” targets and in the European Commission’s Energy Roadmap 2050.The overall objective of this proje ...
Read Project

 9

 FINISHED 

New StOrage Latent and sensible concept for high efficient CSP Plants (NewSOL)

Start date: Jan 1, 2017, End date: Jun 30, 2020,

NewSOL proposal addresses the specific challenge towards high efficiency solar energy harvesting by advance materials solutions and architectures that are in line with those specified in SET-plan. Its main objective is to develop advance materials solutions based on innovative storage media and concepts for Concentrated Solar Power (CSP) up to validation in field of their performance by real time ...
Read Project

 14

 FINISHED 

ACTivating InnoVative IoT smart living environments for AGEing well (ACTIVAGE)

Start date: Jan 1, 2017, End date: Jun 30, 2020,

ACTIVAGE is a European Multi Centric Large Scale Pilot on Smart Living Environments. The main objective is to build the first European IoT ecosystem across 9 Deployment Sites (DS) in seven European countries, reusing and scaling up underlying open and proprietary IoT platforms, technologies and standards, and integrating new interfaces needed to provide interoperability across these heterogeneous ...
Read Project

 50

 FINISHED 

NEXT GENERATION CERAMIC COMPOSITES FOR COMBUSTION HARSH ENVIRONMENTS AND SPACE (C3HARME)

Start date: Jun 1, 2016, End date: May 31, 2020,

There is an increasing demand for advanced materials with temperature capability in highly corrosive environments for aerospace. Rocket nozzles of solid/hybrid rocket motors must survive harsh thermochemical and mechanical environments produced by high performance solid propellants (2700-3500°C). Thermal protection systems (TPS) for space vehicles flying at Mach 7 must withstand projected service ...
Read Project

 12

 FINISHED 

Next Generation GEOSS for Innovation Business (NextGEOSS)

Start date: Dec 1, 2016, End date: May 31, 2020,

The NextGEOSS project will implement a federated data hub for access and exploitation of Earth Observation data, including user-friendly tools for data mining, discovery, access and exploitation. This data hub will be supported by a strong commitment to the engagement of Earth Observation and related communities, with the view of supporting the creation of innovative and business oriented applicat ...
Read Project

 27

 FINISHED 

Scale-up of low-carbon footprint material recovery techniques in existing wastewater treatment plants (SMART-Plant)

Start date: Jun 1, 2016, End date: May 31, 2020,

SMART-Plant will scale-up in real environment eco-innovative and energy-efficient solutions to renovate existing wastewater treatment plants and close the circular value chain by applying low-carbon techniques to recover materials that are otherwise lost. 7+2 pilot systems will be optimized fore > 2 years in real environment in 5 municipal water treatment plants, inclunding also 2 post-processing ...
Read Project

 27

 FINISHED 

Water - Sustainable Point-Of-Use Treatment Technologies (WATERSPOUTT)

Start date: Jun 1, 2016, End date: May 31, 2020,

The WHO estimates that in 2015 in Africa ~156 million people relied on untreated sources for their drinking water. WATERSPOUTT will design, develop, pilot and field-test a range of, sustainable point-of-use solar disinfection (SODIS) technologies that will provide affordable access to safe water to remote and vulnerable communities in Africa and elsewhere. These novel large-volume water treatment ...
Read Project

 18

 FINISHED 

LOW valued energy sources UPgrading for buildings and industry uses (LOWUP)

Start date: Nov 1, 2016, End date: Apr 30, 2020,

In the “secure, clean and efficient energy” initiative, it is stated that the most important milestones for such a transformation are the EU's energy and climate targets for 2030, which are: (i) at least 40% reduction in greenhouse gas emissions compared to 1990, (ii) at least 27% for the share of renewable energy consumed in the EU, and (iii) at least 27% improvement of energy efficiency and an e ...
Read Project

 13

 FINISHED 

Restoring the Pontine Archipelago ecosystem through management of rats and other invasive alien species (LIFE PonDerat)

Start date: Oct 1, 2015, End date: Mar 31, 2020,

Background The breeding success of bird species with unfavourable conservation status, such as Scopoli’s shearwater (Calonectris diomedea) and Yelkouan shearwater (Puffinus yelkouan), is seriously threatened by the black rat (Rattus rattus), as demonstrated by international scientific literature. This negative trend is occurring in several Mediterranean ...
Read Project

 5

 FINISHED 

Restore desertified areas with an innovative tree growing method across the Mediterranean border to increase resilience. (LIFE The Green Link)

Start date: Jul 1, 2016, End date: Mar 31, 2020,

Background European countries are increasingly facing floods, water scarcity, heatwaves, prolonged droughts, unpredictable river flows, temperature rises and decreased rainfall with related impacts on vegetation. These phenomena are closely related to human development and climate change. Their impact is expected to intensify existing risks, particularly ...
Read Project

 9

 FINISHED 

1D Nanofibre Electro-Optic Networks (1D-Neon)

Start date: Apr 1, 2016, End date: Mar 31, 2020,

The vision of 1D-NEON proposal is to develop fibre-based smart materials along with an integrated technology platform for the manufacturing in Europe of new products with multi-sectorial applications in consumer electronics, energy, healthcare and fitness, smart buildings, sensors and e-skin for soft robotics.The overall objective of 1D-NEON is to build a modular platform for manufacturing fibre-b ...
Read Project

 14

 FINISHED 

Zero-defect manufacturing strategies towards on-line production management for European factories (Z-Fact0r)

Start date: Oct 1, 2016, End date: Mar 31, 2020,

Manufacturing represents approximately 21 % of the EU’s GDP and 20 % of its employment, providing more than 30 million jobs in 230 000 enterprises, mostly SMEs. Moreover, each job in industry is considered to be linked to two more in related services. European manufacturing is also a dominant element in international trade, leading the world in areas such as automotive, machinery and agricultural ...
Read Project

 13

 FINISHED 

Green Integrated Structural Elements for Retrofitting and New Construction of Buildings (GREEN INSTRUCT)

Start date: Oct 1, 2016, End date: Mar 31, 2020,

The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Read Project

 15

 FINISHED 

WADI

Start date: Oct 1, 2016, End date: Mar 31, 2020,

The overall objective of WADI project is to contribute to the reduction of losses in water transmission systems and decrease the related energy consumption required for the process. WADI aims to develop an airborne water leak detection surveillance service to provide water utilities with adequate information on leaks in water infrastructure outside urban areas, thus enabling the utility to promptl ...
Read Project

 12

 FINISHED 

Standardization and Development of Assays for Assessment of Influenza Vaccines Correlates of Protection (FLUCOP)

Start date: Mar 1, 2015, End date: Feb 29, 2020,

Background: Influenza viruses cause annual epidemic and occasional pandemics, both of which induce significant morbidity and mortality. Influenza infections affect all age groups but children and adults over the age of 65 are at most risk of developing severe disease.Vaccination is the most effective approach to reduce the impact of annual influenza outbreaks and potential pandemics, however, the ...
Read Project

 26

 FINISHED 

Optimising the management and sustainable use of forest genetic resources in Europe (GenTree)

Start date: Mar 1, 2016, End date: Feb 29, 2020,

The goal of GenTree is to provide the European forestry sector with better knowledge, methods and tools for optimising the management and sustainable use of forest genetic resources (FGR) in Europe in the context of climate change and continuously evolving demands for forest products and services. To reach its goal, GenTree will make scientific, technological and implementation breakthroughs in: ( ...
Read Project

 22