Search for European Projects

36 European Projects Found

Searched on 125080 European Projects

 FINISHED 

GaN densily integrated with Si-CMOS for reliable, cost effective high frequency power delivery systems (GaNonCMOS)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

Power electronics is the key technology to control the flow of electrical energy between source and load for a wide variety of applications from the GWs in energy transmission lines, the MWs in datacenters that power the internet to the mWs in mobile phones. Wide band gap semiconductors such as GaN use their capability to operate at higher voltages, temperatures, and switching frequencies with gr ...
Read Project

 11

 FINISHED 

COmbined hybrid Solution of Metal HYdride and mechanical Compressors for decentralised energy storage and refueling stations (COSMHYC)

Start date: Jan 1, 2017, End date: Dec 31, 2019,

The COSMHYC project aims at answering the needs identified by the MAWP of the FCH2 JU of increasing the energy efficiency of hydrogen production while reducing operating and capital costs, in order to make hydrogen a competitive fuel for transport applications. COSMHYC will develop and test an innovative compression solution from 1 to 1000 based on a hybrid concept, combining a metal hydride compr ...
Read Project

 5

 FINISHED 

Sustainable Smart Mobile Devices Lifecycles through Advanced Re-design, Reliability, and Re-use and Remanufacturing Technologies (sustainablySMART)

Start date: Sep 1, 2015, End date: Oct 31, 2019,

sustainablySMART will make a change to the life cycle of mobile information and communication devices by developing new product design approaches (including enhanced end-of-life performance, re-use and re-manufacturing aspects; i.e. implementing “Design for a Circular Economy”) for smartphones and tablet computers on the product and printed circuit board level, and by new re-/de-manufacturing proc ...
Read Project

 17

 FINISHED 

Ressource recovery from industrial waste water by cutting edge membrane technologies (ReWaCEM)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

The ReWaCEM project aims at reducing water use, wastewater production, energy use, valuable metal resource recovery and water footprint by between 30-90% in the metal plating, galvanizing and printed circuit board industry. In order to achieve these goals, ReWaCem will adopt two cutting edge membrane technologies suitable for the requirements of closed material cycles approaches and recovery conce ...
Read Project

 14

 FINISHED 

Cloud-based Situational Analysis for Factories providing Real-time Reconfiguration Services (SAFIRE)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

In traditional models of manufacturing, the information flow from product design, over production processes, to the manufactured product has been strictly unidirectional. The production equipment “blindly” executes tasks that have no direct relationship to the concepts that are present in the original design models and the product is used with little or no feedback concerning product use patterns. ...
Read Project

 7

 FINISHED 

Critical Infrastructure Protection using Adaptive MILS (CITADEL)

Start date: Jun 1, 2016, End date: May 31, 2019,

Critical infrastructures (CI) rely on complex safety- and security-critical ICT systems placed into unpredictable environments and forced to cope with unexpected events and threats while exhibiting safe adaptive behavior. Recent security trends stress continuous adaptation to increase attacker work factor and to confound reverse-engineering. Critical CI systems must undergo extensive and costly sc ...
Read Project

 14

 FINISHED 

Power Semiconductor and Electronics Manufacturing 4.0 (SemI40)

Start date: May 1, 2016, End date: Apr 30, 2019,

Addressing European Policies for 2020 and beyond the “Power Semiconductor and Electronics Manufacturing 4.0” (SemI40) project responds to the urgent need of increasing the competitiveness of the Semiconductor manufacturing industry in Europe through establishing smart, sustainable, and integrated ECS manufacturing. SemI40 will further pave the way for serving highly innovative electronic markets w ...
Read Project

 38

 FINISHED 

Architecture-driven, Multi-concern and Seamless Assurance and Certification of Cyber-Physical Systems (AMASS)

Start date: Apr 1, 2016, End date: Mar 31, 2019,

Embedded systems have significantly increased in technical complexity towards open, interconnected systems. This has exacerbated the problem of ensuring dependability in the presence of human, environmental and technological risks. The rise of complex Cyber-Physical Systems (CPS) has led to many initiatives to promote reuse and automation of labor-intensive activities. Two large-scale projects are ...
Read Project

 32

 FINISHED 

HyLIFT-EUROPE - Large scale demonstration of fuel cell powered material handling vehicles (HyLIFT-EUROPE)

Start date: Jan 1, 2013, End date: Dec 31, 2017,

The aim of HyLIFT-EUROPE is to demonstrate more than 200 fuel cell material handling vehicles and associated refuelling infrastructure at 5-20 sites across Europe, making it the largest European trial of hydrogen fuel cell material handling vehicles so far and the world’s first large scale demonstration of airport tow tractors. This will continue efforts of the ongoing FCH JU supported HyLIFT-DEMO ...
Read Project

 13

 FINISHED 

Collaborative Environment for Design of AmI enhanced Product-Services Integrating Highly Personalised Innovative Functions with Minimal Ecological Footprint along Life Cycle and of Their Production P (PROSECO)

Start date: Oct 1, 2013, End date: Sep 30, 2017,

The objective is to provide a novel methodology and a comprehensive ICT solution for collaborative design of product-services (Meta Products) and their production processes. The effective extension of products with new services in different sectors (automotive, home appliances, automation equipment etc.) will be achieved by means of Ambient Intelligence (AmI) technology, Lean and Eco-design princi ...
Read Project

 16

 FINISHED 

Laser equipment ASsessment for High impAct innovation in the manufactuRing European industry (LASHARE)

Start date: Sep 1, 2013, End date: Aug 31, 2017,

LASHARE will develop a robust assessment framework for innovative laser equipment paving the way for new manufacturing applications. It will carry out a large number of assessment experiments for a variety of laser equipment targeting strategic manufacturing areas for Europe.The Laser Equipment Assessment (LEA) will be carried out by a trio of research/supplier/user partners. Each LEA will define ...
Read Project

 40

 FINISHED 

Increase airport capacity, safety and security using European GNSS (e-Airport)

Start date: Jan 1, 2015, End date: Jun 30, 2017,

The main goals of the e-Airport project are:• The development of an airport operations monitor application based on European GNSS to increase the efficiency, safety and security of aircraft services and cargo processes • Application demonstrations in two European airports using EGNOS and Galileo Early services.Eurocontrol statistics indicates that 70 % of all flight delays in Europe are caused b ...
Read Project

 8

 FINISHED 

Additive Manufacturing Aiming Towards Zero Waste & Efficient Production of High-Tech Metal Products (AMAZE)

Start date: Jan 1, 2013, End date: Jun 30, 2017,

The overarching goal of AMAZE is to rapidly produce large defect-free additively-manufactured (AM) metallic components up to 2 metres in size, ideally with close to zero waste, for use in the following high-tech sectors namely: aeronautics, space, automotive, nuclear fusion and tooling.Four pilot-scale industrial AM factories will be established and enhanced, thereby giving EU manufacturers and en ...
Read Project

 29

 FINISHED 

Production Flexibility and Efficiency through Simultaneous Three Axis Turning (FlexiSTAT)

Start date: Nov 1, 2013, End date: Oct 31, 2015,

In manufacturing of industrial parts, turning is one of the most important manufacturing processes and is applied mainly by SMEs. However, until today, turning processes suffer from inflexible machine characteristics, as to mention an extreme high amount of needed tool holders and frequent tool changes caused by tool lives of > 3 minutes. In order to raise production flexibility and efficiency sig ...
Read Project

 11

 FINISHED 

FIspace: Future Internet Business Collaboration Networks in Agri-Food, Transport and Logistics (FIspace)

Start date: Apr 1, 2013, End date: Sep 30, 2015,

Insights gained in FI-PPP Phase 1 emphasize the need for novel ICT solutions that allow radical improvements for collaboration in business networks. Primary sectors demanding such solutions are Agri-Food and Transport & Logistics industries: several actors (incl. enterprises, authorities, service providers) need to exchange information & communicate across org. borders to conduct business. Current ...
Read Project

 39

 FINISHED 

Novel Business model generator for Energy Efficiency in construction and retrofitting (NEWBEE)

Start date: Oct 1, 2012, End date: Sep 30, 2015,

The increasing cost of traditional energy sources and the availability of new emerging building technologies in lighting, heating, ventilation, air conditioning, isolation, energy monitoring and management of the buildings, are expected to increase the global market for low carbon solutions. However, some financial, organizational and social innovation enablers are required to leverage the transfo ...
Read Project

 19

 FINISHED 

DockingMonitor - development of automated combined berthing aid and drift monitoring system for large ships, particularly oil and LNG gas tankers (DOCKINGMONITOR)

Start date: Sep 1, 2013, End date: Aug 31, 2015,

There are today great risks associated with the process of berthing large ships, especially so with oil and LNG tankers. Excess speed upon approach to jetty may cause damage to jetty structure, fenders and ship hull. Even more serious is the consequences of oil spills during loading/unloading of oil and LNG, in most cases caused by excess movement of the ship while moored. These spills constitute ...
Read Project

 8

 FINISHED 

Development of a methodology and tool to evaluate the impact of ICT measures on road transport emissions (ICT-EMISSIONS)

Start date: Oct 1, 2011, End date: Mar 31, 2015,

ICT-EMISSIONS aims at developing a novel methodology to evaluate the impact of ICT-related measures on mobility, vehicle energy consumption and CO2 emissions of vehicle fleets at the local scale, in order to promote the wider application of the most appropriate ICT measures. The proposed methodology combines traffic and emission modelling at micro and macro scales. These will be linked with interf ...
Read Project

 11

 FINISHED 

European demonstration of hydrogen powered fuel cell materials handling vehicles (HyLIFT-DEMO)

Start date: Jan 1, 2011, End date: Jun 30, 2014,

The overall purpose and ambition of HyLIFT-DEMO is to conduct a large scale demonstration of hydrogen powered fuel cell materials handling vehicles, which enables a following deployment and market introduction starting no later than 2015.The HyLIFT-DEMO project objectives are:to conduct the demonstration of at least 11 units of fuel cell forklifts and fuel cell tow tractors with an integrated 3rd ...
Read Project

 10

 FINISHED 

Optimisation of Transport Solutions for Compressed Hydrogen (DeliverHy)

Start date: Jan 1, 2012, End date: Dec 31, 2013,

Compressed hydrogen trailers are cost efficient for near term distribution. However, with the currently used 20 MPa trailers the supply of larger refuelling stations would result in multiple truck deliveries per day, which is often not acceptable. In order to increase the transported quantities, lighter materials and higher pressure must be adopted. The cost increase of the hydrogen trailers resul ...
Read Project

 6

 FINISHED 

Training in European Asset Health Management (TEAM)

Start date: Nov 1, 2009, End date: Oct 31, 2013,

"Transport demand, both for passengers and freight, is growing strongly. To meet the economic growth targets of the Lisbon Agenda and to facilitate the economic integration of the European Union, European transportation needs to cater for a continuing medium term growth in demand. However, transport growth using the technologies of today is unsustainable. New technologies and processes need to be ...
Read Project

 7

 FINISHED 

20 percent efficiency on less than 100 µm thick industrially feasible c-Si solar cells (20PLµS)

Start date: Oct 1, 2010, End date: Sep 30, 2013,

The overall objective of the current project is a significant contribution to the dissemination of PV in order to improve the sustainability of the European energy supply and to strengthen the situation of the European PV industry.The approach to reach this overall objective is the development of solar cells which are substantially thinner than today’s common practice. We will reduce the current s ...
Read Project

 11

 FINISHED 

Automated Polishing for the European Tooling Industry (poliMATIC)

Start date: Jun 1, 2010, End date: May 31, 2013,

poliMATIC - Automated polishing for the European Tooling IndustryFor the manufacturing of tools 12 to 15 % of the manufacturing costs and 30 to 50 % of the manufacturing time are allocated to polishing. As current automated polishing techniques are almost not applicable on parts with freeform surfaces and function relevant edges like 95% of the tools, the polishing is predominantly done manually.T ...
Read Project

 13

 FINISHED 

Smart Food and Agribusiness: Future Internet for Safe and Healthy Food from Farm to Fork (SmartAgriFood)

Start date: Apr 1, 2011, End date: Mar 31, 2013,

The SmartAgriFood project addresses the food and agribusiness as a use case for the Future Internet. The intelligence, efficiency, sustainability and performance of the agri-food sector can be radically enhanced by using information & decision support systems that are tightly integrated with advanced internet-based networks & services. Concurrently, the sector provides extremely demanding use case ...
Read Project

 23

 FINISHED 

Lean Product and Process Development (Lean PPD)

Start date: Feb 1, 2009, End date: Jan 31, 2013,

The proposal is addressing the need of European manufacturing companies of a new model that go beyond lean manufacturing to ensure the transformation of the enterprise into lean environment. This is to response to the customers and market demands of value creation incorporating sustainability, culture and customisation. A significant change in enterprise performance can come from the adoption of l ...
Read Project

 12

 FINISHED 

H2moves.eu Scandinavia (H2moves Scandinavia)

Start date: Jan 1, 2010, End date: Dec 31, 2012,

With this proposal the Scandinavian Hydrogen Highway Partnership (SHHP) applies for becoming the first EC funded European Lighthouse Project (LHP) for hydrogen fuel cell cars. Correspondingly, the LHP has been christened “H2moves Scandinavia” being synonymous to “H2moves.eu” as acronym for the cluster of European demonstration projects on hydrogen for transport. A state-of-the-art hydrogen refuell ...
Read Project

 10

 FINISHED 

Simulation of Upset Recovery in Aviation (SUPRA)

Start date: Sep 1, 2009, End date: Aug 31, 2012,

"The aim of this research project is to investigate the usefulness of advanced flight simulator concepts for teaching pilots to detect and recover from flight upsets. The term “flight upset” indicates a situation when an aircraft in flight unintentionally exceeds the parameters normally experienced in line operations or training. Loss of control due to unsuccessful upset recovery is considered an ...
Read Project

 10

 FINISHED 

Complex structural and multifunctional Parts from enhanced Wood-based Composites - eWPC (BioStruct)

Start date: Sep 1, 2008, End date: Aug 31, 2012,

Despite a lot of research activities carried out in the field of Wood Plastic Compounds there is still a certain lack of interest in the commercial market for this new class of materials. BioStruct will help to overcome these barriers in the market success by the development of the next material generation, so-called enhanced Wood Plastic Composites eWPC, avoiding the most important drawbacks in c ...
Read Project

 21

 FINISHED 

High density integration by embedding chips for reduced size modules and electronic systems (HERMES)

Start date: May 1, 2008, End date: Feb 29, 2012,

The proposed HERMES project wants to initiate a new mainstream packaging concept not bound by the existing supply chain, and by large-scale manufacturing technology. The project is aiming at further developing the concept of embedded thin chips into electronic boards, as a base for an integrated manufacturing of electronic circuits.The project consortium will develop a technology for embedding act ...
Read Project

 14

 FINISHED 

ASSET Advanced Safety and Driver Support in Essential Road Transport (ASSET-ROAD)

Start date: Jul 1, 2008, End date: Dec 31, 2011,

"As the European objectives of integration and economic growth are achieved, there is a corresponding vigorous growth in road traffic volumes. This results in congestion and increased numbers of road fatalities. The objective of the ASSET project is to reverse these negative effects by developing a number of promising technologies and integrating them into a new holistic approach to road safety. ...
Read Project

 19

 FINISHED 

Ambient-Intelligent Interactive Monitoring System for Energy Use Optimisation in Manufacturing SMEs (AmI-MoSES)

Start date: Sep 1, 2008, End date: Aug 31, 2011,

The main business aim is to produce a leap forward in energy efficiency and cost reduction in manufacturing SMEs.The AmI-MoSES project will develop an (ambient) intelligent monitoring system for energy consumption, dedicated to manufacturing SMEs, to provide comprehensive information about the energy use, and knowledge-based support for improvements in energy efficiency. Existing energy consumptio ...
Read Project

 9

 FINISHED 

Customer in the Loop: Using Networked Devices enabled Intelligence for Proactive Customers Integration as Drivers of Integrated Enterprise (CuteLoop)

Start date: Feb 1, 2008, End date: Apr 30, 2011,

The strategic objective of CuteLoop is to explore how Intelligent Networked Devices such as enhanced RFID-based systems, can be used to effectively 'integrate customers within an Integrated Enterprise' and with this provide an important step towards 'real' Integrated, Real Time Enterprise. Such integrated real time enterprise, having customers as integrated drivers, needs, on one side, highly flex ...
Read Project

 9

 FINISHED 

Supporting action to prepare large-scale hydrogen vehicle demonstration in Europe (NextHyLights)

Start date: Jan 1, 2010, End date: Dec 31, 2010,

The Supporting Action NextHyLights will work in close cooperation with and under supervision of FCH JU. NextHyLights will directly contribute to the FCH JU activities regarding the preparation of the next calls and will be prepared to react flexibly on FCH JU requirements. It will use the MAIP as the basis and will help to detail it towards the AIPs taking the ambitions and opportunities of all st ...
Read Project

 12

 FINISHED 

High Quality Tube and Pipe Production by Hybrid Welding (HQ-TUBES)

Start date: Aug 1, 2008, End date: Jul 31, 2010,

"Hybrid laser-arc welding offers many advantages compared with conventional arc or laser welding. The process does, however require a high level of control if high quality welds are to be produced. This proposal tackles the issues of weld quality and productivity improvement for manufacturing pipes through development of advanced sensors for the hybrid laser-arc welding process. Hybrid process dev ...
Read Project

 10

 FINISHED 

Quality for SME

Today’s situation on the European market, rising global competition along with the world economic crisis and the cost pressure resulting out of it, forces SMEs to put more efforts to increase their competitiveness. One of the possibilities is the improvement of the production process quality, which allows to manufacture products of the highest quality while keeping production costs on the competit ...
Read Project

 4

 FINISHED 

Transfer of INNOVATRAIN project

The main objective of the project was to provide a means for an advanced innovation process management and facilitated innovation introduction in SMEs belonging to the manufacturing sector.The main objective of the training developed within the project is to increase SME innovation through the implementation of practices supporting process of introducing of innovation in the company. Training curr ...
Read Project

 4