Search for European Projects

24 European Projects Found

Searched on 125080 European Projects

 FINISHED 
This project will provide a more accurate and low cost tool for quantitative measurement of musculoskeletal conditions, one of the most widespread and costly illnesses in society today. It will provide physiotherapists with wireless, light and easy to use measuring units that will enable them to organize their time better and perform more accurate diagnosis, providing faster diagnosis and treatmen ...
Read Project

 11

 FINISHED 
Our project is to develop a commercial pre-production prototype point of care test for invasive cervical cancer (ICC). This easy-to-use lab-on-a-chip system (SelfPOCNAD) will enable women to collect samples in the comfort of their own homes and take them into a GP surgery for testing and provision of immediate results. This will dramatically increase compliance of women with the ICC screening pr ...
Read Project

 4

 FINISHED 
To achieve the EC binding targets of 20% electricity generation from renewables by 2020 will require between 600 and 833 TWh to be produced by wind power which will require between 119,000 to 165,000 new turbines. According to the European Wind Energy Technology Platform publication “O&M strategies are based on periodic inspection; fault statistics from existing stock is either unavailable or insu ...
Read Project

 8

 FINISHED 
Our novel concept is to develop a low-fat cheese processing technology to enable the production of low-fat Mozzarella-type ingredient cheese with superior texture, flavour and melting qualities. The newly developed low-fat cheese will be suitable for use in pizzas, ready meals, fast food, sandwiches and salads. Our primary target markets are the industrial cheese sector for chilled and frozen pizz ...
Read Project

 12

 FINISHED 
This project aims to significantly improve the competitive position of our SME foundry members within the SME-AG partner European Investment Casters’ Federation (EICF), Svenska Gjuteriföreningen (SG, Swedish foundry association), Croatian Chamber of Economy (CCE, with its Association of metalworks in Croatia that includes all foundries) and Foundry Association of the Basque Country and Navarre (AF ...
Read Project

 12

 FINISHED 
Our Idea is to develop a computer controlled, advanced, profile spray quench, heat extraction system with advanced cooling rate control, closed loop thermal and dimensional control and integrated high grade heat recovery & re-use. We aim to recover 50% of the energy wasted at the profile cooling stage (for re-use in the energy intensive heat-ageing process), and simultaneously reduce scrap produce ...
Read Project

 8

 FINISHED 
By 2020, the EC aim to increase our overall renewable energy capacity from 8.5% to 20% as a proportion of Europe’s total energy demand. Considering that domestic heating and hot water provision accounts for nearly 40% of total energy demand it is clearly desirable to increase market penetration of renewable heating systems. On a domestic scale solar thermal systems are increasingly common and are, ...
Read Project

 11

 FINISHED 
We are seeking FP7 funding towards the design and development of a trenchless pipe rehabilitation system capable of adaption to a wide range of pipe relining markets. Our aim is to meet the demands of these diverse markets providing a high performance, low maintenance solution with reduced energy usage and superior operational performance which our extensive market research has validated a signifi ...
Read Project

 13

 FINISHED 
This project will provide a more efficient and environmentally friendly method to produce wear resistant cast iron products which are hard only in strategic locations and softer and more machinable elsewhere, creating a more flexible product in a one step process. This will contribute greatly towards the increased competitiveness in a wide range of European SMEs in a wide scope of industries, thro ...
Read Project

 6

 FINISHED 
"Polymer products have transformed society. Some of their many uses include construction, food preservation, healthcare, water distribution and sanitation. They are crucial in saving energy through their light weight and insulating properties. As a result the European polymer processing industry is of strategic importance to Europe. However, increasing feedstock prices seriously affect the competi ...
Read Project

 10

 FINISHED 
EU farmers face significant costs related to the management and disposal of on-farm organic waste arisings such as manures and slurries through having to comply with specific EU legislation such as the Nitrates Directive and the Landfill Directive. Rising waste disposal costs have been cited as a contributing factor to the estimated closure of 7,000 EU farms per annum. Our consortium consists of f ...
Read Project

 7

 FINISHED 
The aim of this project is to design a 3D virtual and interactive team-training software platform to serve the seafarers’ safety training needs and to meet EC’s recent safety requirements, set up for the various maritime industries. The prototype to be delivered will be a distributed, scalable, collaborative interactive simulation environment that will enable training of seafarers. The proposed sy ...
Read Project

 8

 FINISHED 
The proposed DEMYBE project (filter aid-fine particles of the size of 50 μm average) has been conceived upon the needs of the reduction of mycotoxins, such as ochratoxin A (OTA), in everyday beverages (particularly beer and wine) and at the same time to substitute the Kieselghur filter aid. The aims of the proposed DEMYBE project are: to substitute the currently used carcinogenic Kieselghur filter ...
Read Project

 9

 FINISHED 
Our idea is to develop microwave technology which will reduce drying times in buildings after flooding events. A single Microdry unit will run off mains electricity be capable of drying a room in just 10% of the time taken by current technologies. We will develop an intelligent control system that will measure the reflected microwaves to determine residual moisture content and adjust the power out ...
Read Project

 8

 FINISHED 
Biofuels for transport are considered to be the answer decreasing green house gas emissions, to enhance energy security and respond to rising oil prices by substituting or blending petrol and diesel with biofuels and to contribute to regional development by increasing employment opportunities and diversifying activities for farmer through energy crops. The EU only produces 4.1 % of the total world ...
Read Project

 9

 FINISHED 
The EU fishing industry is a major source of employment and food providing more than 7.5 million tonnes of fish and employing over 526,000 people of which 88% work within the SME community. The European SMEs in this sector are under increased pressure to increase efficiency due to rising crude oil prices. In addition, there is the EU legislation on Total Allowable Catch or minimum landing sizes a ...
Read Project

 15

 FINISHED 
Water heaters are on the list of appliances mandatory for EU energy labelling, but this has not been implemented pending appropriate test standards. The objective of this project is to develop a Domestic Electrical Storage Water Heater (DESWH) which will meet the label requirements’ best possible rating in the suggested, mandatory EU EcoDesign scheme which will enter into force in 2013 . With the ...
Read Project

 10

 FINISHED 
Chocolate is a complex material, which can be damaged by means of bloom growth or cracking. This is a significant issue for filled products such as pralines or wafers. For SMEs and larger companies these problems can prevent the manufacture of products of sufficient quality. It is the aim of this project to study the phenomena of chocolate bloom and crack propogation in chocolate for filled swe ...
Read Project

 14

 FINISHED 
The standards for arsenic in drinking water have been revised; in Europe, through the Directive 98/83/CE, and in the U.S.. the new Maximum Contaminant Level is now 10 μgAs/L. Fulfilling these new requirements is therefore urgent and it will be a major challenge for the water supply companies, as existing technologies are partly meeting these needs. The major issue in the new Arsenic limit is the a ...
Read Project

 7

 FINISHED 

Low Temperature and Lean Volume Cleaning System (LOWTEV)

Start date: Nov 1, 2008, End date: May 31, 2011,

"Under the current issues surrounding climate change, conserving water resources is becoming an increasing priority. As areas become stressed due to water exploitation or environmental pressures, the amount of water resources available for use have been decreasing (World Meteorological Organisation, 1999) and Europe has not been able to avoid these pressures. It is crucial to protect and improve w ...
Read Project

 9

 FINISHED 
"Recent developments of large scale heat treatment processes that use a variety of indirect heat sources are now available, as are traditional preservation treatments which involve certain hazardous chemicals. While these technologies offer some attraction to large scale enterprises, the ability of SMEs to afford this technology makes them an impractical solution. Furthermore these new heat treatm ...
Read Project

 11

 FINISHED 
"We propose a new approach for urban wind power to help the EU to meet renewable energy targets and make micro–generation acceptable in environmentally sensitive areas. Typically, the wind around buildings is too turbulent and slow to be of much use. Normal turbines need to be placed high above them which is expensive and attracts planning objections. If buildings could be used to augment turb ...
Read Project

 8

 FINISHED 
"China poses a major competitive threat to the European market for the manufacture of products for packaging. Moulded Paper Products (MPP) from China are up 20% cheaper than the equivalent EU products. Due to continued increase in prices there is a need for the EU industry to reduce cost affiliated with low energy efficiencies. A major portion of recovered fibre is sourced from local SMEs such as ...
Read Project

 9

 FINISHED 
"Current dough-sheeting process produces up to 30% of waste (The mass of waste is of 20% order of the end-product produced). The average cost of waste is €100/tonne (including landfill or incineration tax, administration, transport and raw material cost). Such high cost has burdened the industry greatly, and SMEs are particularly vulnerable to further increase of landfill tax. In response to the c ...
Read Project

 11