Search for European Projects

26 European Projects Found

Searched on 125080 European Projects

 FINISHED 
PROTECT aims to introduce to the market One step antimicrobial finish processes for polymeric materials used in i) specialty textiles for public areas and hospitals, ii) water treatment membranes, and iii) implantable medical devices. Compared to main existing manufacturing routes, the proposed one-step coating technologies are simple, fast, and reproducible. For this, PROTECT uses as a starting p ...
Read Project

 23

 FINISHED 
Advanced Microscopy techniques are widely recognized as one of the pillars onto which the research and manufacture of Nanotechnology based products is sustained. At present, the greatest challenge faced by these techniques is the realization of fast and non-destructive tomographic images with chemical composition sensitivity and with sub-10 nm spatial resolution, in both organic and inorganic mate ...
Read Project

 10

 FINISHED 
The Green INSTRUCT project will develop a prefabricated modular structural building block that is superior to conventional precast reinforced concrete panels by virtue of its reduced weight, improved acoustic and thermal performance and multiple functionalities. The Green INSTRUCT block consists of over 70% of CDW in weight. The Green INSTRUCT project will: (i) achieve sustainability and cost sav ...
Read Project

 15

 FINISHED 

Piezoelectronic Transduction Memory Device (PETMEM)

Start date: Dec 1, 2015, End date: Nov 30, 2018,

Computer clock speeds have not increased since 2003, creating a challenge to invent a successor to CMOS technology able to resume performance improvement. The key requirements for a viable alternative are scalability to nanoscale dimensions – following Moore’s Law – and simultaneous reduction of line voltage in order to limit switching power. Achieving these two aims for both transistors and memor ...
Read Project

 11

 FINISHED 
The here proposed DIMAP project focuses on the development of novel ink materials for 3D multi-material printing by PolyJet technology. We will advance the state-of-the art of AM through modifications of their fundamental material properties by mainly using nanoscale material enhanced inks. This widens the range of current available AM materials and implements functionalities in final objects. The ...
Read Project

 13

 FINISHED 
One of the greatest challenges facing regulators in the ever changing landscape of novel nano-materials is how to design and implement a regulatory process which is robust enough to deal with a rapidly diversifying system of manufactured nanomaterials (MNM) over time. Not only does the complexity of the MNM present a problem for regulators, the validity of data decreases with time, so that the wel ...
Read Project

 46

 FINISHED 
The key objective of PowerBase “Enhanced substrates and GaN pilot lines enabling compact power applications” is to ensure the availability of Electronic Components and Systems (ECS) for key markets and for addressing societal challenges, aiming at keeping Europe at the forefront of the technology development, bridging the gap between research and exploitation, creating economic and employment grow ...
Read Project

 40

 FINISHED 

Graphene-based disruptive technologies (GrapheneCore1)

Start date: Apr 1, 2016, End date: Mar 31, 2018,

This project is the second in the series of EC-financed parts of the Graphene Flagship. The Graphene Flagship is a 10 year research and innovation endeavour with a total project cost of 1,000,000,000 euros, funded jointly by the European Commission and member states and associated countries. The first part of the Flagship was a 30-month Collaborative Project, Coordination and Support Action (CP-CS ...
Read Project

 158

 FINISHED 

Actuation and characterisation at the single bond limit (ACRITAS)

Start date: Oct 1, 2012, End date: Mar 31, 2017,

"Scanning probe microscopy(SPM) has now evolved to the point where not only is imaging and manipulation with single atom resolution achievable but the state of the art in the field involves sub-molecular and sub-atomic resolution: individual chemical bonds can be resolved, their properties measured, and their spatial symmetry exploited.SPM is, however, increasingly a victim of its own success. The ...
Read Project

 12

 FINISHED 
NANOREM is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of users in the EU environmental sector.NANOREM uniquely takes a holistic approach to examining how the potential for nanoremediati ...
Read Project

 30

 FINISHED 
In this proposed integrating project we will develop innovative in-line high throughput manufacturing technologies which are all based on atmospheric pressure (AP) vapour phase surface and on AP plasma processing technologies. Both approaches have significant potential for the precise synthesis of nano-structures with tailored properties, but their effective simultaneous combination is particularl ...
Read Project

 24

 FINISHED 
Current applications of microwave technologies in communications, remote sensing and in industry are based on the properties of the interaction of microwaves with matter at supra-wave length scales (above centimetres). The developments performed in Nanotechnology in recent years makes now conceivable to explore the interaction of microwaves with matter at much smaller scales, from micrometres to n ...
Read Project

 10

 FINISHED 
Quality assurance plays a key role in the food industry. Current control of safety and quality characteristics in the bakery industry is carried out mainly by random sampling of the initial, intermediate and/or final products. However, this methodology does not allow immediate adjustments to the production process in case any negative quality features are detected and consequently large batches of ...
Read Project

 12

 FINISHED 
IAQ is a crucial factor for human’s apperception. It is proven that air quality affects the health and the well-being of people. IAQSense focuses on R&D to develop a new nanotechnology based on innovative sensor system, miniaturized, low cost for mass produced sensors.The main technology innovation is based on surface ion mobility dynamics, it separates each gas component and its concentration lik ...
Read Project

 10

 FINISHED 
Quality assurance plays a key role in the food industry. Current control of safety and quality characteristics of the various products is carried out mainly by random sampling of the initial, intermediate and/or final products. However, this methodology does not allow immediate adjustments to the production process in case any negative quality features are detected and consequently large batches o ...
Read Project

 8

 FINISHED 
SMART-NANO will develop an innovative, cost-effective technology platform that provides a total solution “from sample-to-result” for the detection, identification, and measurement of nanoparticles in complex matrices in Consumer Products, in Food, in the Environment and in situ in Biota. A key innovation is the miniaturized, application-specific, cartridge-based system integrating separation, dete ...
Read Project

 8

 FINISHED 

Graphene-Based Revolutions in ICT And Beyond (GRAPHENE)

Start date: Oct 1, 2013, End date: Mar 31, 2016,

This Flagship aims to take graphene and related layered materials from a state of raw potential to a point where they can revolutionize multiple industries – from flexible, wearable and transparent electronics, to new energy applications and novel functional composites.Our main scientific and technological objectives in the different tiers of the value chain are to develop material technologies fo ...
Read Project

 154

 FINISHED 

Energy Efficient Converters using GaN Power Devices (E2COGAN)

Start date: Apr 1, 2013, End date: Mar 31, 2016,

The E2COGaN project will target the demonstration of GaN-on-Si as a disruptive power device technology platform through the whole value chain up to demonstrators with high industrial, societal and environmental relevance. Its innovative character will be proven through a well-balanced and application specific trade-off between the “corner” benefits given by higher efficiency, higher switching freq ...
Read Project

 25

 FINISHED 

Neuronal NanoCarbon Interfacing Structures (NeuroCare)

Start date: Mar 1, 2012, End date: Feb 28, 2015,

NeuroCare aims to create better retinal, cortical and cochlear implantable devices through the use of improved interfacing between the electronic implants and living cells. The NeuroCare concept involves low-cost, carbon-based materials, well-adapted for medical implants, because they (i) offer wide range of electronic properties (metal, semiconductor and insulator), (ii) are bio-inert and (iii) a ...
Read Project

 14

 FINISHED 
This project will produce a new tool, the Volumetric Scanning Microwave Microscope (VSMM), for non-destructive 3D nanoscale structural characterisation. Full development of this new tool will take place ready for commercial exploitation within the project duration. The consortium, comprising three SMEs, a Large Company, an RTD Performer and two Research Institutions, will develop and commercialise ...
Read Project

 8

 FINISHED 
Government authorities, restoration architects and conservation scientists have always had to face the problem of deterioration of historic building materials, in particular stone, wood and glass; an issue that has become more and more urgent since climate change has worsened natural decay and the impact of atmospheric pollution. In addition in recent years socio-economic requirements have claimed ...
Read Project

 14

 FINISHED 

Microstructure secured and self-verifying medicines (SAVEmed)

Start date: Apr 1, 2011, End date: Mar 31, 2014,

Counterfeit medicines are a serious and fast expanding threat for the customer’s health and the pharmaceutical manufacturers business. The aim of this research collaboration is to add anti-counterfeiting and track & trace technology to the product level that goes beyond the state-of-the-art security approach on the packaging level. The project SAVEmed will bring a solution for the counterfeit and ...
Read Project

 7

 FINISHED 

Integrated and functional Lab-on-Chip (InFuLOC)

Start date: Mar 1, 2009, End date: Feb 28, 2013,

The objective of this project is to create Lab-on-chip devices that allow sensitive analyte detection as well being highly integrated and have high functionality. The project will develop lab-on-chip platform technologies for fluidic manipulations and analyte detection and develop specific Lab-on-Chip (LOC) applications. Integrated and easy to use fluidic manipulations within LOC devices will be a ...
Read Project

 6

 FINISHED 
"Biomineralization is the formation of minerals by living cells and organisms. To understand the processes involved in biomineralization, at the cutting edge between inorganic and organic world, the cooperation between molecular and cell biologists, inorganic chemists, and physical chemists, but also computational scientists is required. The products formed by biomineralization are often composite ...
Read Project

 10

 FINISHED 
observatoryNANO brings together leading EU organizations who collectively have expertise in the technological; economic; societal/ethical; health, safety, and environmental analysis of nanotechnologies. Its primary aim is to develop appropriate methodologies to link scientific and technological development of nanotechnologies with socio-economic impacts. Both of these aspects will be enhanced by e ...
Read Project

 16

 FINISHED 
"Our project aims to gather, improve, catalogue and present characterisation techniques, methods and equipment for nanomechanical testing. European-wide activities coordinated by a new virtual centre will improve existing nanoindentation metrology to reveal structure-properties relationship at the nano-scale. These methods are the only tools to characterise nanocomposite, nanolayer and interface m ...
Read Project

 17