Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
Integrating activities planned under MaRINET 2 build upon the achievements of the advanced community created in MaRINET FP7. MaRINET 2 will ensure the continued integration and enhancement of all leading European research infrastructure and facilities specialising in research, development and testing of offshore renewable energy systems including electrical sub systems and grid integration through ...
Read Project

 39

 FINISHED 

Simulation in Real Time for Manufacturing with Zero Defects (STREAM-0D)

Start date: Oct 1, 2016, End date: Mar 31, 2020,

Facts: i) Zero-defect manufacturing and flexibility of production processes are some of the main challenges for European manufacturing; ii) One of the engineering tools with higher potential is the linking of simulation tools with measurement devices for real-time control of applications. The huge potential of this synergistic loop remains untapped for manufacturing processes and could be used f ...
Read Project

 10

 FINISHED 
This research project focuses on several key Direct Energy Deposition (DED) Additive Manufacturing (AM) processes that have great potential to be used as cost-effective and efficient repairing and re-manufacturing processes for aerospace components such as turbine blades and landing gears. This project aims to conduct fundamental research to understand the material integrity through chosen DED AM ...
Read Project

 4

 FINISHED 

European Master on Advanced Robotics +

Start date: Oct 15, 2014, End date: Oct 14, 2019,

...ence, Electrical Engineering, Mechanical Engineering, and Applied Mathematics. The applicants have to be fluent in English.EMARO+ is an integrated master's course conducted by the following partners: Ecole Centrale de Nantes (coordinator, France), Warsaw University of Technology (Poland), the University of Genova (Italy) and the University of Jaume I (Castelló de la Plana, Spain). In addition, EMA ...
Read Project

 4

 FINISHED 
“AdMoRe: Empowered decision-making in simulation-based engineering: Advanced Model Reduction for real-time, inverse and optimization in industrial problems” aims at providing in-depth training of Early Stage Researches (ESRs) in the development and application of state-of-the-art computational models and numerical methods to solve cutting-edge engineering problems. The main driving factors of all ...
Read Project

 7

 FINISHED 
SARAH is concerned with establishing novel holistic, simulation-based approaches to the analysis of aircraft ditching. It is build up from a consortium of experts from OEM industries, experienced suppliers of simulation technologies, established research institutions and representatives of the certification authorities. Results of SARAH are expected to support a performance-based regulation and ce ...
Read Project

 12

 FINISHED 

European Education in Advanced Ship Design

Start date: Sep 1, 2015, End date: Feb 28, 2019,

...ncludes 3 semesters in 3 different countries and cultures:Semester 1: Liege, Belgium University of Liege - Ship Technology, Ship Structure, Ship Hydrodynamics and Ship DesignSemester 2: Nantes, FranceEcole Centrale de Nantes - Ship Hydrodynamic and Initiation to Research ActivitiesSemester 3: Four available locations are availableAdvanced lectures, Master Thesis and InternshipStudents experience a ...
Read Project

 6

 FINISHED 
SIMUTOOL will develop a simulation platform for the manufacturing of composites through microwave MW heating. The simulation will include the electromagnetic field coupled with heat transfer mechanisms that take place during the production process. It will also include the process control loop which will enable the optimum design of the manufacturing process.One of the major outputs of the simulat ...
Read Project

 9

 FINISHED 
The European manufacturing industry faces new challenges, which are currently not addressed by today’s products and systems. Most of the products are still in essence ‘simple’ in nature, with no capability for adapting to the consumers’ needs and no integrated methods exist for the holistic acquisition and processing of feedback information emanating from product-services. ICP4Life proposes an int ...
Read Project

 12

 FINISHED 
This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 
The ProRegio project aims at developing a manufacturing intelligence based product-service that will rigorously change the current way how customer requirements are addressed by manufacturing companies. The development of this new business approach is based on three major issues, namely (i) design of customer oriented product-services for frugal innovation in a bottom-up development process, (ii) ...
Read Project

 12

 FINISHED 

OceaNET

Start date: Sep 1, 2013, End date: Aug 31, 2017,

OceaNET concerns floating offshore wind and wave energy. These two areas are well aligned with the European Energy Strategic Plan and the Horizon 2020 programme.It aims at contributing to develop specific technologies and enabling technologies common to both energy sources. The research activities are structured in a number of research projects, which will provide the opportunity for a set of youn ...
Read Project

 10

 FINISHED 
This is a project for higher education student and staff mobility between Programme Countries and Partner Countries. Please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2015, End date: May 31, 2017,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1

 FINISHED 
"The present project intends to introduce new uses of the level set representation of surfaces in order to develop simulation methods able to solve problem currently unsatisfactorily addressed. Three main applications are targeted: localisation phenomena and very complex cracking patterns, precise determination of stresses around contact zones and, finally, introduction in reasonably coarse meshes ...
Read Project

 1

 FINISHED 
"The objective of this project is to regroup a cluster of private and academic laboratories supported by key manufacturers from both aeronautic, automotive and railway sectors in order to investigate the possibility to benchmark specific composites :• from the aeronautics. Depending on the application targeted, the cluster will be able to take advantage of the mutual return on experiment in order ...
Read Project

 19

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2014, End date: May 31, 2016,

Over the last 20 years Centrale Nantes has been able to develop an active understanding of the global systemic relations. Centrale Nantes has also been able to take its place within the academic Europe and to make itself widely visible and to contribute to the promotion of the excellence of the European Higher Education Institutions over the world. The wide combination of the Double Degree program ...
Read Project

 1

 FINISHED 
Offshore Renewable Conversion systems are mostly at the pre-commercial stage of development. They comprise wave energy and tidal stream converters as well as offshore wind turbines for electrical generation. These devices require research to be undertaken at a series of scales along the path to commercialization. Each technology type is currently at a different stage of development but each one al ...
Read Project

 29

 FINISHED 

VISION ADVANCED INFRASTRUCTURE FOR RESEARCH (VISIONAIR)

Start date: Feb 1, 2011, End date: Jan 31, 2015,

VISIONAIR is a project of creation of a European infrastructure that should be a unique, visible and attractive entry towards high level visualisation facilities. These facilities must be open to the access of a wide set of research communities. By integrating existing facilities, it will create a world-class research infrastructure enabling to conduct frontier research. This integration will prov ...
Read Project

 27

 FINISHED 
The key objective of the TROPOS project is the development of a floating modular multi-use platform system for use in deep waters, with an initial geographic focus on the Mediterranean, Tropical and Sub-Tropical regions but designed to be flexible enough not to be limited in geographic scope.The TROPOS approach is centered on the modular development where different types of modules can be combined ...
Read Project

 21

 FINISHED 

The Foundation for the Smart Factory of the Future (FoFdation)

Start date: Jun 1, 2010, End date: Oct 31, 2014,

Today's major challenges for manufacturing companies, operating under productivity pressures, greater product variability and environmental constraints, are clearly identified as global cooperation with multiple supply chain partners, production optimization, and tracking and management of information to meet new requirements like traceability, security, sustainability. These requirements lead to ...
Read Project

 19

 FINISHED 

Marine Renewable Integrated Application Platform (MARINA Platform)

Start date: Jan 1, 2010, End date: Jun 30, 2014,

MARINA is a European project dedicated to bringing offshore renewable energy applications closer to the market by creating new infrastructures for both offshore wind and ocean energy converters. It addresses the need for creating a cost-efficient technology development basis to kick-start growth of the nascent European marine renewable energy (MRE) industry in the deep offshore – a major future gl ...
Read Project

 18

 FINISHED 

Advanced Techniques in Computational Mechanics (ATCOME)

Start date: Jan 1, 2010, End date: Dec 31, 2013,

As the range of phenomena that need to be simulated in engineering practice broadens, the limitations of conventional computational methods, such as finite elements (FE), finite volumes or finite difference methods, have become apparent. There are many problems of industrial and academic interest which cannot be easily treated with these classical methods. To overcome the limitations of classical ...
Read Project

 7

 FINISHED 
The S-MC-S project aims at supporting European manufacturing to adapt to global competitive pressures by developing methods and innovative enabling technologies towards a customer oriented and eco-efficient manufacturing. To this end, S-MC-S vision is to define and research a new production paradigm, Sustainable Mass-Customization, while also presenting Customization as one of the main driving for ...
Read Project

 14

 FINISHED 
The objective of NextMuSE is to initiate a paradigm shift in the technology of Computational Fluid Dynamics (CFD) and Computational Multi-Mechanics (CMM) simulation software which is used to model physical processes in research and technology development across a range of industries.NextMuSE relies on a mesh-free method, Smoothed Particle Hydrodynamics (SPH), which is fundamentally different from ...
Read Project

 9

 FINISHED 
"The proposed action builds strongly up on the logics of its predecessor with the same name. The overall objective is to create a pool of specialised wave energy research professionals to support an emerging industry in a field with a very strong anticipated growth and no dedicated existing training curriculum. Although most jobs can be done being a trained engineer in one of the adjacent fields, ...
Read Project

 13

 FINISHED 

Automatic Welding Process for the Shipbuilding Industry (SHIPWELD)

Start date: Feb 28, 2010, End date: Nov 29, 2011,

SHIPWELD project will focus on a metal welding process applied to the ship building industry. The objective is to design a monitoring technique aiming to perform a good quality welding joint on a typical application in the ship building industry with a fully automatic welding system unit. Up to now the different section plates of ships are welded manually which causes inaccuracies due to the poor ...
Read Project

 6

 FINISHED 

Design Of customeR dRiven shOes and multi-siTe factorY (DOROTHY)

Start date: Jul 1, 2008, End date: Jun 30, 2011,

Shoe Manufacturing in Europe faces an intense and growing competitive pressure brought forth by low-wage countries.To maintain competitiveness DOROTHY promotes a response based on the transformation of shoe industry and related business model meant to strengthen Europe’s ability to compete in terms of high added value for the customer (as cost-based competition is not compatible with the goal of m ...
Read Project

 14

 FINISHED 
The objective of the project is to promote ERASMUS MUNDUS Joint Degrees in South America. The focus is on Joint Masters and Joint Doctorates in Engineering and all the possibly connected disciplines. Considering the South American most developed economies (Argentina, Brazil, Chile and Colombia) the major concern of the top Institutions to sending their best students to Europe for higher education ...
Read Project

 16

 FINISHED 
There are many problems facing the LOT 2 countries but there is consensus amongst all that the problems must be solved by the countries themselves and a major tool is education. Strong international experiences are therefore important so these countries to see and experience different systems and adapt the best to their own situations. The potential for meaningful international cooperation is in ...
Read Project

 34

 FINISHED 
The INTERWEAVE partnership & mobility project gathers diversified and complementary leading Asian and European HEIs in Science and Technology. It is jointly coordinated by Ecole Centrale de Nantes, France, and University of Malaya, Malaysia. It gathers 10 Asian and 10 EU HEIs, and is supported by 2 associate partners from the corporate and institutional realms. It triggers and manages the training ...
Read Project

 22

 FINISHED 
Atlantic Caucasus Technical universities Initiative for Valuable Education – ACTIVE - project can be considered as an element of common Europe vision, especially in view of introducing former Soviet Union countries. The project aims mainly at launching a research and education network comprising HEIs from the European Union, Belarus, Moldova, Ukraine, Georgia and Armenia. Most of partners have exp ...
Read Project

 22

 FINISHED 
Casting or injection moulded product designers and mould designers often work in a transnational context where it is important to master complex CAD software products, be aware of customer production methods, master specific design tricks, etc. The project is aimed at developing new training opportunities and improving existing training programmes on a basis of elaboration of products in die casti ...
Read Project

 15

 FINISHED 
EM-BEAM program is mainly dedicated to research exchanges and will establish mobility scheme for more than 80 individuals, doctorates (57%), post-docs (14%) and staff (29%). More than 60% of the individuals will be European. The program is focused, but not restricted, on the main thematic fields tackling the XXIst Century challenges like Engineering, Mathematics and Informatics, and Natural Scienc ...
Read Project

 12

 FINISHED 
The Partnership is submitting a proposal for a project named ARCADE (Academic Relationship for Central Asia with Destination Europe) the main objective of which is to promote higher education cooperation between EU and Central Asia (Kazakhstan, Kyrgyzstan, Tajikistan, Turkmenistan, Uzbekistan) in coherence with the EU general goal of improving the bilateral cooperation in the field of education. T ...
Read Project

 20

 FINISHED 
The eASTANA (euroAsian Starter for Technical Academic Network Application) programme can be considered as an element of common Euro-Asian collaboration and partnership of European Union and Central Asia Universities.The eASTANA program is focused on engineering, technology, business and management fields of study. In the case of business and management science we offer specialisations only close c ...
Read Project

 14

 FINISHED 
Read Project

 20

 FINISHED 
East-West European Network on higher Technical education - EWENT – project can be considered as an element of common Europe vision, especially in view of introducing former Soviet Union countries. The project aims mainly at launching a research and education network comprising HEIs from the European Union, Belarus, Moldova and Ukraine. The development of engineering has been one of the priorities ...
Read Project

 17

 FINISHED 

Heritage (EU-India)

Start date: Jul 15, 2012,

Read Project

 18