Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 
The objective of the project IMPROOF is to drastically improve the energy efficiency of steam cracking furnaces by at least 20%, in a cost effective way, while simultaneously reducing emissions of greenhouse gasses and NOx per ton ethylene produced by at least 25%. One important way to reduce the energy input in steam cracking furnaces is to reduce coke formation on the reactor wall. The use of ei ...
Read Project

 11

 FINISHED 
The DISC project addresses the need to reduce the consumption of fossil fuels by developing key technologies for the next generation of high-performance photovoltaic (PV) solar cells and modules, allowing ultra-low solar electricity costs with minimum environmental impact.DISC focuses on the only way to fully exploit the potential of silicon to its maximum: through the use of carrier selective jun ...
Read Project

 13

 FINISHED 
The Exilva flagship project will consist in the upscaling of the Borregaard’s MFC process from the existing pilot plant (50-70 tons/year) to the full scale flagship plant (1000 tons/year) and demonstrate an industrial symbiosis between the biomass/forest industry (Norwegian Spruce) and application industries in a wide range of market segments by developing and commercialising added value (performa ...
Read Project

 7

 FINISHED 
The COSMICC consortium gathers key industrial and research partners with world-leading positions in the fields of Silicon photonics, CMOS electronics, Printed Circuit Board-Packaging, Optical transceivers and Data-Centers around a strong vision: mass commercialization of Si-photonics-based transceivers is possible starting in 2019 by enhancing the existing photonic integration platform of one of t ...
Read Project

 11

 FINISHED 
Europe has invoked the SET-Plan to design and implement an energy technology policy for Europe to accelerate the development and deployment of cost-effective renewable energy systems, including photovoltaics. With lower cost of solar electricity, PV could significantly contribute to the achievements of the 20-20-20 objectives.The Joint Program on PV of the European Energy Research Alliance (EERA-P ...
Read Project

 37

 FINISHED 
"More and more industrial sectors (e.g. automotive, wind energy, boatbuilding) are demanding lightweight and high-performance composite materials, which represent a strong driver to develop the carbon fibre (CF) industry. Today, almost 80% of CF available on the market are using PolyAcryloNitrile (PAN) as the starting raw material because of its superior properties compared to pitch based carbon f ...
Read Project

 14

 FINISHED 
Studies have demonstrated the importance of CD73 in the spread of cancer. Overexpressed in numerous cancer types, this enzyme leads to the production of high amounts of extracellular Adenosine, creating an immunosuppressive microenvironment, and contributing to tumor proliferation and dissemination. Neutralizing its activity represents a highly potent and innovative therapy.Following on the recent ...
Read Project

 8

 FINISHED 

Rational molecular Assessments and Innovative Drug Selection (RAIDS)

Start date: Oct 1, 2012, End date: Mar 31, 2017,

Cervical cancer (CC) is the second most common cause of cancer deaths in women worldwide. The main objective of the RAIDs project is to use this model system which is accessible to repeat biopsies to learn how to stratify patients into targeted therapies. The patients’ tumors will be classified into molecular subtypes based on their molecular profile by use of high-throughput technologies (sequen ...
Read Project

 19

 FINISHED 
"Hydrogen is expected to be a highly valuable energy carrier for the 21st century as it should participate in answering main societal and economical concerns. However, in order to enable its extensive use as an energy vector, it is of primary importance to ensure its societal acceptance and thus its safety in use. To this aim, hydrogen storage and transportation must be secured. In particular toda ...
Read Project

 7

 FINISHED 
"The European photovoltaics PV market still represents the predominant share of worldwide installations and electricity generated from PV is becoming increasingly competitive, with an average levelized cost of energy (LCOE) estimated to be between 0.10–0.16 €/kWh in 2011 . This constant reduction of LCOE means that the European industry can only regain its competitiveness with (i) a concomitant re ...
Read Project

 16

 FINISHED 

Low cost flexible integrated composite process (LOWFLIP)

Start date: Oct 1, 2013, End date: Sep 30, 2016,

Fibre-reinforced polymer composite materials are leading candidates as component materials to improve the efficiency and sustainability of many transport modes. The advantages of high performance composites are numerous: they include lighter weight, the ability to tailor lay-ups for optimum strength and stiffness, improved fatigue life, corrosion resistance and, with good design practice, reduced ...
Read Project

 11

 FINISHED 
Hydrogen is expected to be highly valuable energy carrier for the 21st century as it should participate in answering main societal and economical concerns. To exploit its benefits at large scale, further research and technological developments are required. In particular, the storage of hydrogen must be secured. Even if burst in service of pressure vessels in composite material is very unlikely, w ...
Read Project

 8

 FINISHED 
The project aims on the one hand the development of new biobased materials specially adapted to the development of a wide range of containers or packages (films made by extrusion laminating, trays or lids developed by injection moulding and bottles performed through extrusion blow moulding technologies) and the improvement of thermal, mechanical and barrier properties of these packages through nan ...
Read Project

 22

 FINISHED 
"Organised crime use information technology systems to communicate, work or expand their influence. Current tools for the fight against organised crime have shown their limits and reflect the need to develop a scalable tool to track them more efficiently.CAPER’s objective is to build a common collaborative and information sharing platform for the detection and prevention of organised crime in whic ...
Read Project

 18

 FINISHED 
"The vision of the TIPS project is to produce better innovation in the transport sector by enhancing the capacity of EU-funded FP projects in the field of transport to be at the source of innovation and to help them transform research results into products and services.The transport sector is faced with major challenges. Demand in transport will grow by 50% for passengers and 80% for freight (EU ...
Read Project

 9

 FINISHED 
The general objectives of the OCMOL project, focussed on the development of an alternative chemical route based on oxidative coupling of methane followed by oligomerization to liquids, are twofold: 1. To develop a small-scale process: process intensification via cutting-edge micro reactor technologies will enable to skip the expensive scaling up stage to provide a proof of concept of the OCMOL liq ...
Read Project

 18

 FINISHED 

Increase Innovation and Research within Security Organisations (INSec)

Start date: Apr 1, 2012, End date: Jul 31, 2014,

Research within Security Organizations by analyzing the main aspects of Innovation Management in security-related operators (end-users), both public and private and not only in terms of quantity but also quality. It is important to assist these organisations to become conscious of the importance of managing Research and Innovation activities.INSec will establish a framework that will contribute to ...
Read Project

 19

 FINISHED 
Hydrogen storage is a key enabling technology for the use of hydrogen as an energy vector. To improve volumetric and gravimetric performance, carbon fiber composite cylinders are currently being developed. However, current standards governing the design, qualification and in-service inspection of carbon fiber composite cylinders do not allow cylinder design to be optimized. In particular, safet ...
Read Project

 12

 FINISHED 
The development and implementation of bio-refinery processes is an absolute necessity and the key to meet the vision towards bio-based economy. The EuroBioRef concept is an integrated, sustainable and diversified bio-refinery involving all biomass value chain stakeholders. The latter will allow large-scale research, testing, optimisation and demonstration of processes in the production of a wide r ...
Read Project

 34

 FINISHED 
"NANOFOL proposes to develop a new diagnostic/therapy approach using folate based nanobiodevices (FBN) able to provide a new type of cost efficient treatment for chronic inflammatory diseases such as Atherosclerosis and Rheumatoid Arthritis with low side effects that will constitute a more advantageous solution than current therapies. NANOFOL will achieve all that by fulfilling the following obje ...
Read Project

 14

 FINISHED 
The certification of a rail vehicle according to European regulations, Technical Specifications for Interoperability, European Standards and national safety rules represents a significant element of both vehicle cost and time to market. Indeed, a large part of vehicle certification mandates testing for safety, performance and infrastructure compatibility. The new EN standards together with the CR/ ...
Read Project

 23

 FINISHED 

Fatty liver: Inhibition of Progression (FLIP)

Start date: Jan 1, 2010, End date: Jun 30, 2013,

"Non-alcoholic fatty liver disease (NAFLD) has become one of the top concerns for the practising hepatogastroenterologist due to the obesity epidemic and its potential to progress to advanced liver disease which significantly impacts on overall and liver-related mortality. The aim of the FLIP (Fatty Liver: Inhibition of Progression) project is to understand and prevent the progression of liver dis ...
Read Project

 17

 FINISHED 
FAB2ASM tackles a major problem in 3D integration that currently limits industrial take-up: high throughput and high accuracy 3D integration of miniaturized dies onto dies or substrates. This issue is extremely important for 3D integration of microelectronics and microsystems. 3D integration will take off in the next 5 years in all measures including total number of devices, the market share, as w ...
Read Project

 10

 FINISHED 
"The actual political, environmental and economical trends applied to air transport lead to move in the future to the All Electric Aircraft. The goal of this concept is to eliminate as many hydraulic power sources and complicated circuit of high-pressure hydraulic lines as possible. The CREAM objective is to reach new high performance and reliability capacities of Electro-Mechanical Actuators in ...
Read Project

 15

 FINISHED 
"The objective of SVETLANA project is to involve important EU and Russian Federation industries and research organisations from the aviation area into a common ambitious effort to enhance flight operational safety and initiate smart maintenance through intelligent and automated Flight Data Monitoring (FDM). More specifically, SVETLANA aims to provide an advanced smart update of flight safety by:• ...
Read Project

 7

 FINISHED 
The project aims at developing a new integrated and automated microfluidic tool for cancer cells screening. This instrument will have a reliability and power much beyond state of the art (capture yield increased by a factor from 10X to 100X and multimodal typing of the cells in 3D high resolution images), allowing earlier and more accurate diagnosis, prognosis and selection of treatments of cancer ...
Read Project

 9

 FINISHED 

Transport Fire Safety Engineering in the European Union (TRANSFEU)

Start date: Apr 1, 2009, End date: Nov 30, 2012,

There is an urgent need to have a confident toxicity measurement methodology that contributes to the existing level of surface transport fire safety, which is the most difficult issue to assess in case of fire. The lack of confidence in the robustness of the existing product toxicity classification forbids its acceptance as a standard which prevent the European industry from common safety rules an ...
Read Project

 22

 FINISHED 

Converging technologies for micro systems manufacturing (COTECH)

Start date: Oct 1, 2008, End date: Oct 31, 2012,

The objective of the project COTECH is to investigate new approaches of µ-manufacturing based on advanced technology convergence processes and to propose hybrid solutions for high added value cost effective µ-manufacturing emerging applications. The main goals of COTECH are to develop: (1) µ-replication technologies underpinned by emerging tool-making technologies for processing multi-material com ...
Read Project

 25

 FINISHED 
The breakthrough objective of NANOTHER is to develop & characterise a novel nanoparticle system that will be used as a therapeutic agent or diagnosis tool for breast cancer, colorectal cancer & bone metastasis. Theranostics, the development of nanoparticles with both functionalities, will also be carried out using the hyperthermic effect to kill tumour cells or to release the selected drug . The n ...
Read Project

 19

 FINISHED 
The InLiveTox project will form an interdisciplinary consortium at the European level, together with a key American research group to develop an improved in vitro model for the study of nanoparticle (NP) uptake, transport and cellular interaction, thus advancing our understanding of NP toxicity. Rather than repeat what has, or is being done in the field of aerosol NP and lung toxicology, InLiveTo ...
Read Project

 9

 FINISHED 
"The global aim of RAPSODI is : · to develop a human vaccine candidate against most or all Leishmania species that cause the most severe leishmaniasis in the world. An unique vaccinal solution will thus be provided to protect against the various clinical phenotypes (namely visceral, cutaneous and mucocutaneaous leishmaniasis, VL, CL and ML respectively). · to establish all the associated procedure ...
Read Project

 9

 FINISHED 
"The current interoperability approval process for new High Speed and Conventional railway vehicles in Europe is a very long and costly process. The Technical Specifications for Interoperability provide common regulations for the homologation of new rolling stock but do not directly eliminate the current burdens regarding new vehicle approval on each network. In this context, the pantograph/catena ...
Read Project

 16

 FINISHED 
"The certification of a rail vehicle according to European regulations, Technical Specifications for Interoperability, European Standards and national safety rules represents a significant element of both vehicle cost and time to market. Indeed, a large part of vehicle certification mandates testing for safety, performance and infrastructure compatibility. AEROTRAIN will help meet the business sce ...
Read Project

 18

 FINISHED 
Security is one of the highest goods of mankind for which it is worth to make available the most advanced technologies in order to protect it. This achievement is a great challenge, realizing diversity of technologies applied for security and the tremendous resources to provide it all over Europe. The Security sector is widely recognised as a key asset for the future of Europe and World. Security ...
Read Project

 11

 FINISHED 
A breakthrough of Proton Exchange Membrane Fuel Cells (PEMFC) requires a radical performances improvement of the key fuel cell material components (catalysts and protonic membrane) as well as highly innovative solutions to overcome the membrane assembly and integration limitations. Actual PEM fuel cells presents Membrane Electrode Assembly (MEA) architecture corresponding to a proton conductive me ...
Read Project

 7

 FINISHED 

INtegrated European Signalling System (INESS)

Start date: Oct 1, 2008, End date: Mar 31, 2012,

"Due to the seamless guidance by rails, the railway system requires a dedicated signalling sub-system, whereby a major part of the functionality must be ensured and controlled on the infrastructure side. From a European perspective, the traditional signalling is one of the most conservative parts of the railway system strongly bound to the national traditions by all involved parties.Since 1990 the ...
Read Project

 31

 FINISHED 

Strategies TO Prevent Pregnancy-Associated Malaria (STOPPAM)

Start date: Feb 1, 2008, End date: Jul 31, 2011,

"The Partners propose to conduct a cohort study in pregnant women and their newborns to quantify the effects of Pregnancy-Associated Malaria (PAM) and to identify a PAM vaccine candidate. Effects of PAM on the pregnant woman (placental infection and anaemia), the offspring (birth weight reduction), and the infant (increased morbidity and mortality) are well known. Studies underlined the role of P ...
Read Project

 7

 FINISHED 
The KAPPA-Health study aims to identify the principle performance factors that account for a successful SME participation in FP6 “Life sciences, genomics and biotechnology for health” and FP7 “Health” theme. The success in terms of quantity such as out-licensing/new products on the market but also the longer term quality in respect of the sustainable survival of the companies and the establishment ...
Read Project

 7

 FINISHED 

Heterojunction Solar Cells based on a-Si c-Si (HETSI)

Start date: Feb 1, 2008, End date: Jan 31, 2011,

"The Photovoltaic (PV) industry needs to find new approaches to make solar cells competitive. Crystalline silicon (c-Si) wafer-based technology has a real potential to achieve significant cost reduction if the R&D effort is made on the most critical issues. These issues are the reduction of silicon material consumption, the increase of solar cell efficiency and an improved integration into modules ...
Read Project

 12

 FINISHED 
HIGH-EF will provide the silicon thin film photovoltaic (PV) industry with a unique process allowing for high solar cell efficiencies (potential for >10%) by large, low defective grains and low stress levels in the material at competitive production costs. This process is based on a combination of melt-mediated crystallization of an amorphous silicon (a-Si) seed layer (2 µm) of the seed layer by a ...
Read Project

 8