Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Hydrogen Mobility Europe 2 (H2ME 2)

Start date: May 1, 2016, End date: Jun 30, 2022,

Hydrogen Mobility Europe 2 (H2ME 2) brings together action in 8 European countries to address the innovations required to make the hydrogen mobility sector truly ready for market. The project will perform a large-scale market test of hydrogen refuelling infrastructure, passenger and commercial fuel cell electric vehicles operated in real-world customer applications and demonstrate the system bene ...
Read Project

 37

 FINISHED 
The objective of REPLICATE is to demonstrate Smart City technologies in energy, transport and ICT in districts in San Sebastia, Florence and Bristol addressing urban complexity and generate replication plans in other districts and in follower cities of Essen,Nilufer and Lausanne.Main challenges for cities are to increase the overall energy efficiency, to exploit better local resources in terms of ...
Read Project

 37

 FINISHED 
Inflammatory bowel diseases (IBD) are the second most common immune-mediated disorders in Europe, affecting more particularly young people. The current therapies, including antibodies, show three main drawbacks: efficacy, tolerability and convenience. NEW DEAL solution will offer radical therapeutic progress for all IBD patients, thanks to the improved efficacy and increased safety of the specific ...
Read Project

 11

 FINISHED 

Internet of Food and Farm 2020 (IoF2020)

Start date: Jan 1, 2017, End date: Dec 31, 2020,

The IoF2020 project is dedicated to accelerate adoption of IoT for securing sufficient, safe and healthy food and to strengthen competitiveness of farming and food chains in Europe.It will consolidate Europe’s leading position in the global IoT industry by fostering a symbiotic ecosystem of farmers, food industry, technology providers and research institutes.The IoF2020 consortium of 73 partners, ...
Read Project

 72

 FINISHED 
The benefits of high efficiency concentrated solar power (CSP) and photovoltaic (PV) are well known: environmental protection, economic growth, job creation, energy security. Those technologies can only be applied properly in regions with annual mean radiation values higher than 1750 kWh/m2 per year. CSP has advantages in front of PV: possible 24h continuous electricity production, electricity and ...
Read Project

 11

 FINISHED 

Fishfriendly Innovative Technologies for Hydropower (FIThydro)

Start date: Nov 1, 2016, End date: Oct 31, 2020,

FIThydro addresses the decision support in commissioning and operating hydropower plants (HPP) by use of existing and innovative technologies. It concentrates on mitigation measures and strategies to develop cost-efficient environmental solutions and on strategies to avoid individual fish damage and enhancing population developments. Therefore HPPS all over Europe are involved as test sites. The f ...
Read Project

 26

 FINISHED 
NoAW : No Agro-Waste.Innovative approaches to turn agricultural waste into ecological and economic assets.Driven by a “near zero-waste” society requirement, the goal of NoAW project is to generate innovative efficient approaches to convert growing agricultural waste issues into eco-efficient bio-based products opportunities with direct benefits for both environment, economy and EU consumer. To ach ...
Read Project

 32

 FINISHED 
Most maritime products are typically associated with large investments and are seldom built in large series. Where other modes of transport benefit from the economy of series production, this is not the case for maritime products which are typically designed to refined customer requirements increasingly determined by the need for high efficiency, flexibility and low environmental impact at a compe ...
Read Project

 39

 FINISHED 
ACTIVAGE is a European Multi Centric Large Scale Pilot on Smart Living Environments. The main objective is to build the first European IoT ecosystem across 9 Deployment Sites (DS) in seven European countries, reusing and scaling up underlying open and proprietary IoT platforms, technologies and standards, and integrating new interfaces needed to provide interoperability across these heterogeneous ...
Read Project

 50

 FINISHED 
While online grocery stores are expanding, supermarkets continue to provide customers with the sensory experience of choosing goods while walking between display shelves. Therefore, retail and logistics companies are concerned with making the shopping experience more comfortable and exciting while, at the same time, using technology to reduce costs and improve efficiency. The REFILLS project aims ...
Read Project

 7

 FINISHED 

Hydrogen Mobility Europe (H2ME)

Start date: Jun 1, 2015, End date: May 31, 2020,

Hydrogen Mobility Europe (H2ME) brings together Europe’s 4 most ambitious national initiatives on hydrogen mobility (Germany, Scandinavia, France and the UK). The project will expand their developing networks of HRS and the fleets of fuel cell vehicles (FCEVs) operating on Europe’s roads, to significantly expand the activities in each country and start the creation of a pan-European hydrogen fuell ...
Read Project

 27

 FINISHED 
The goal of GenTree is to provide the European forestry sector with better knowledge, methods and tools for optimising the management and sustainable use of forest genetic resources (FGR) in Europe in the context of climate change and continuously evolving demands for forest products and services. To reach its goal, GenTree will make scientific, technological and implementation breakthroughs in: ( ...
Read Project

 22

 FINISHED 
The loss of biodiversity and degradation of ecosystems jeopardize the sustainable provision of ecosystem services and are major scientific and societal challenges. Addressing this challenge and providing scientific support to stakeholders and policy makers requires a coherent interdisciplinary research framework, with coordinated strategies and programmes at the national, regional and internationa ...
Read Project

 31

 FINISHED 
Five of the 20 raw materials identified by the European Commission as critical are commonly found in association with alkaline rocks and carbonatites (heavy and light rare earth elements, niobium, fluorspar, and phosphate). Other elements increasingly important for ‘hi-tech’ applications, and found in these rocks include hafnium (Hf), tantalum (Ta), scandium (Sc) and zirconium (Zr). In fact, there ...
Read Project

 12

 FINISHED 

Sustainable CellulAr networks harVEstiNG ambient Energy (SCAVENGE)

Start date: Feb 1, 2016, End date: Jan 31, 2020,

Energy sustainability is key to future mobile networks due to their foreseen capacity upsurge. The objective of the ETN SCAVENGE (Sustainable CellulAr networks harVEstiNG ambient Energy) is to create a training network for early-stage researchers (ESRs) who will contribute to the design and implementation of eco-friendly and sustainable next-generation (5G) networks and become leaders in the relat ...
Read Project

 9

 FINISHED 
The business model currently under development for second generation ethanol is a replication of the model used for first generation which is plants with massive annual production capacities. Such high production rates require high capital investment and huge amounts of biomasses (250-350,000 tons per year) concentrated in small radius catchment areas to afford transportation costs (50 km). Under ...
Read Project

 17

 FINISHED 
Blood-based biomarkers such as Circulating Tumor Cells (CTCs), circulating free tumor DNA (cfDNA) and microRNAs (miRNAs) have the potential to improve the development of personalized medicines for cancer patients. This is of particular importance when biopsies of the primary tumor or metastases are not accessible (e.g. at early disease stages or in minimal residual disease) or possible and the ass ...
Read Project

 34

 FINISHED 

Energy for Smart Objects (EnSO)

Start date: Jan 1, 2016, End date: Dec 31, 2019,

The goal of EnSO is to develop and consolidate a unique European ecosystem in the field of autonomous micro energy sources (AMES) supporting Electronic European industry to develop innovative products, in particular in IoT markets. In summary, EnSO multi-KET objectives are:• Objective 1: demonstrate the competitiveness of EnSO energy solutions of the targeted Smart Society, Smart Health, and Smart ...
Read Project

 36

 FINISHED 
Thermoelectric materials have been studied for several decades now. Improved TE materials are emerging with the so-called second-generation thermoelectric (GEN2 TE) materials: silicides and half-Heusler. These materials are low-cost, based on most earth-abundant elements and eco-friendly materials, and can impact positively European industry and society by converting wasted heat into electricity. ...
Read Project

 14

 FINISHED 

WALL Insulation NOvel Nanomaterials Efficient systems (WALL IN ONE)

Start date: Oct 1, 2016, End date: Sep 30, 2019,

WALL IN ONE will develop a consistent package of new advanced sustainable insulation products and systems. The HONEST (High performance Optimized Nanomaterial Energy efficient SysTem) package is a “modular toolbox system” providing a set of complementary solutions that will address most of the complex challenges raised by thermal renovation as well as new construction.The HONEST package includes: ...
Read Project

 13

 FINISHED 
The REE4EU project will develop, validate and demonstrate in 2 industrially relevant Pilots an innovative Rare Earth Alloys (REA) production route from Permanent Magnets (PM) and Secondary Batteries (SB) waste. Currently only 1% of RE waste is being recovered as no adequate process is available, so proof-of-concept in REE4EU will open-up a fully new route bringing recovery of 90% of in-process was ...
Read Project

 14

 FINISHED 
The demand for lower dependency on critical raw materials (CRM) such as rare earths (RE) is not only a European but a global problem that demands immediate action. The purpose of this project is to exploit advanced theoretical and computation methods together with state-of-the-art materials preparation and characterization techniques, to develop the next generation RE-free/lean permanent magnets ( ...
Read Project

 18

 FINISHED 
KRAKEN will develop a disruptive hybrid manufacturing concept to equip SME and large industries with affordable All-in-one machine for the customised design, production/reparation and quality control of functional parts (made in aluminium, thermoset or both materials combined from 0,1m till 20m) through subtractive and novel additive technologies in vast working areas without floor space requireme ...
Read Project

 15

 FINISHED 
Daedalus is conceived to enable the full exploitation of the CPS concept of virtualized intelligence, through the adoption of a completely distributed automation platform based on IEC-61499 standard, fostering the creation of a Digital Ecosystem that could go beyond the current limits of manufacturing control systems and propose an ever-growing market of innovative solutions for the design, engine ...
Read Project

 14

 FINISHED 
MAESTRO aims to develop and combine with existing Selective Laser Melting (SLM) techniques five innovations that will constitute the basis of a highly competitive manufacturing value chain: (1) a single pre-process software for a numerical chain combining all mandatory steps and configurations of SLM together with its related pre- and post-processes, (2) Hybridization of SLM with MIM, (3) Adaptive ...
Read Project

 10

 FINISHED 

EU-CHINA Lever for IPM Demonstration (EUCLID)

Start date: Sep 15, 2015, End date: Sep 14, 2019,

More sustainable pest management methods are needed in order to reduce the negative effects of pesticides on human health and the environment. The overall goal of EUCLID is to contribute to secure the production of food for the increasing worldwide population while developing sustainable production approaches to be used in the European and Chinese agriculture.The choice of the crops of interest in ...
Read Project

 19

 FINISHED 

Learning from Innovation and Networking in STEM

Start date: Sep 1, 2016, End date: Aug 31, 2019,

The LINKS project (Learning from Innovation and Networking in STEM - science, technology, engineering and mathematics) aims at improving inquiry-based STEM teaching through the continuing professional development (CPD) of teachers and their educators, both at primary and secondary levels. The project is carried by a partnership composed of 9 institutions involved in STEM CPD of teachers and their ...
Read Project

 9

 FINISHED 

Architecture for EurOpean Logistics Information eXchange (AEOLIX)

Start date: Sep 1, 2016, End date: Aug 31, 2019,

Supply chain visibility supported by easy access to, and exchange and use of relevant and abundant logistics-related information is an important prerequisite for the deployment of pan-European logistics solutions that are needed to increase efficiency and productivity, and to reduce environmental impact. Although there is a proliferative development of logistics-related data stores, information ch ...
Read Project

 34

 FINISHED 
The MAESTRI project aims to advance the sustainability of European manufacturing and process industries. This is done by providing a management system in the form of a flexible and scalable platform, and to guide and simplify the implementation of an innovative approach, the Total Efficiency Framework. The overall aim of this framework is to encourage a culture of improvement within process indust ...
Read Project

 15

 FINISHED 
The overall aim of LoCoMaTech is, in the first place, to enable the novel HFQ® process, (patented by ICL) in its latest most advanced form, which includes 10 recently patented refining technologies (TRL4), to be used for the manufacture of lightweight, high strength body and chassis structures and components for low-cost vehicles, by establishing a prototype, full scale pilot production line (TRL6 ...
Read Project

 20

 FINISHED 
Background Conflicts between humans and brown bear (Ursus arctos) populations in Slovenia remain an ongoing threat to the conservation status of bears and steps must be taken to improve coexistence. Measures need to tackle such challenges as a lack of understanding of bears’ socio-economic and environmental value, inflated estimations of the risk of bea ...
Read Project

 9

 FINISHED 
In DIACAT we propose the development of a completely new technology for the direct photocatalytic conversion of CO2 into fine chemicals and fuels using visible light. The approach utilises the unique property of man-made diamond, now widely available at low economic cost, to generate solvated electrons upon light irradiation in solutions (e.g. in water and ionic liquids). The project will achieve ...
Read Project

 8

 FINISHED 
Building-integrated photovoltaics (BIPV) is currently an expansive market. Market analysts estimate a compound annual growth rate of 18,7% and a total of 5,4 GW installed worldwide between 2013 and 2019. One of the main drivers for BIPV market growth in the EU is the increasingly demanding legislation related to energy performance in buildings. The large potential for energy savings in buildings l ...
Read Project

 15

 FINISHED 

S přírodou k vzájemnému porozumění

Start date: Dec 31, 2016, End date: Jun 29, 2019,

People are nowadays becoming increasingly aware of the positive influence of Nature on their health. Nature, among others, fulfills their physical needs by providing unique sensory experiences. The constant desire to return to Nature may be associated with "innate feelings that people are part of all living things on Earth" (so-called Biophilia Theory). But also its mystery, depth, beauty, fragili ...
Read Project

 7

 FINISHED 

Critical Infrastructure Protection using Adaptive MILS (CITADEL)

Start date: Jun 1, 2016, End date: May 31, 2019,

Critical infrastructures (CI) rely on complex safety- and security-critical ICT systems placed into unpredictable environments and forced to cope with unexpected events and threats while exhibiting safe adaptive behavior. Recent security trends stress continuous adaptation to increase attacker work factor and to confound reverse-engineering. Critical CI systems must undergo extensive and costly sc ...
Read Project

 14

 FINISHED 

Rf Engineered substrates to FostER fEm performaNCE (REFERENCE)

Start date: Dec 1, 2015, End date: May 31, 2019,

The REFERENCE project aims to leverage a European leading edge Radio Frequency (RF) ecosystem based on RF Silicon On Insulator (SOI) disruptive technology, perceived as the most promising to address performance, cost and integration needs for RF Front End Modules (FEMs)s.The project targets to develop over the next 3 years, innovative solutions from material, engineered substrates, process, design ...
Read Project

 18

 FINISHED 
AEROARMS proposes the development of the first aerial robotic system with multiple arms and advanced manipulation capabilities to be applied in industrial inspection and maintenance (I&M). The objectives are:1. R&D on aerial manipulation to perform I&M. This includes: 1.1 Based on previous partner results, developing systems which are able to grab and dock with one or more arms and perform dext ...
Read Project

 10

 FINISHED 
"SINFONIA utilizes EU funds to bolster public/private resources and provide European added value to already committed district refurbishment master plans of two middle sized European cities (Bolzano, Italy and Innsbruck, Austria), the targeted performances of which combine three key features thanks to industry involvement: i) unique cooperation between the cities belonging to the same climate zone ...
Read Project

 25

 FINISHED 
ENABLE-S3 will pave the way for accelerated application of highly automated and autonomous systems in the mobility domains automotive, aerospace, rail and maritime as well as in the health care domain. Virtual testing, verification and coverage-oriented test selection methods will enable validation with reasonable efforts. The resulting validation framework will ensure Europeans Industry competiti ...
Read Project

 76

 FINISHED 
The main objective of the project is the development of the pilot scale production system of the new generation of nanoporous organic and hybrid aerogels with multiple functions for application in gas and humidity adsorption, personal care and food. Thereby the fast manufacturing in form of spherical particles will be in focus in order to reduce the process time and to decrease the overall process ...
Read Project

 13