Search for European Projects

Over 40 European Projects Found

Searched on 125080 European Projects

 FINISHED 

Stable and High-Efficiency Perovskite Light-Emitting Diodes (SHINING)

Start date: Mar 1, 2017, End date: Feb 28, 2022,

Light-emitting diodes (LEDs), which emit light by a solid-state process called electroluminescence, are considered as the most promising energy-efficient technology for future lighting and display. It has been demonstrated that optimal use of LEDs could significantly reduce the world’s electricity use for lighting from 20% to 4%. However, current LED technologies typically rely on expensive high-v...
Read Project

 1

 FINISHED 
Silicon carbide presents a high breakdown field (2-4 MV/cm) and a high energy band gap (2.3–3.2 eV), largely higher than for silicon. Within this frame, the cubic polytype of SiC (3C-SiC) is the only one that can be grown on a host substrate with the huge opportunity to grow only the silicon carbide thickness required for the targeted application. The possible growth on silicon substrate has remai...
Read Project

 14

 FINISHED 
Severe ocular disorders are affecting the lives of more than 100Mill people world-wide and at least 25% of the population above 70 years of age, a growing demographic group in EU. More than 8 million people lose their lives to cancer every year, making cancer a leading cause of pre-mature mortality in the world. The main hallmarks of severe eye conditions (i.e angiogenesis, inflammation and vascul...
Read Project

 18

 FINISHED 
Current food quality and safety testing is, to a large extent, an inefficient, expensive and ineffective process, unable to assure food safety for all consumers and unable to prevent major food fraud incidents. A paradigm shift in quality and safety testing is urgently required in order to free resources for an intensified combat against fraud in the food chain. As an enabling technology solution,...
Read Project

 7

 FINISHED 
Europe has somewhere between 150,000 and 500,000 landfill sites, with an estimated 90% of them being “non-sanitary” landfills, predating the EU Landfill Directive of 1999. These older landfills tend to be filled with municipal solid waste and often lack any environmental protection technology. In order to avoid future environmental and health problems, many of these landfills will soon require exp...
Read Project

 12

 FINISHED 

The Role of Universities in Innovation and Regional Development (RUNIN)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

The Role of Universities in Innovation and Regional Development (RUNIN) is a European Training Network for Early-Stage Researchers (ESRs) in the field of science and innovation studies. The aim of the network is to train researchers on how universities contribute to innovation and economic growth in their regions through research seeking to examine how universities fulfill their third mission in r...
Read Project

 9

 FINISHED 

Circular European Economy Innovative Training Network (CircEuit)

Start date: Sep 1, 2016, End date: Aug 31, 2020,

Circ€uit – the Circular European Economy Innovative Training Network - creates a cohort of future leaders in research, policy & business through its innovative training programme focused on the Circular Economy. Circular business models, based on leasing or providing functionality rather than products, often called Product Services Systems, are widely seen as a way how business can create sustaina...
Read Project

 7

 FINISHED 
DevTMF takes the collective technical expertise and experience of working on thermo-mechanical fatigue (TMF) problems related to large aero-engines from three major centres of TMF research, namely Linköping, Swansea and Nottingham Universities in order to perform the activities of this topic. Together, the team will deliver significant technical innovations in following major topics to ensure worl...
Read Project

 3

 FINISHED 
Additive manufacturing (AM) is a technology by which physical objects can be built directly from 3D Computer Aided Design (CAD) data, and is widely acknowledged as an enabler for revolutionizing the manufacturing landscape. It replaces traditional production methods like casting and machining, and enables essentially arbitrary geometric shapes to be produced. Although significant progress has been...
Read Project

 2

 FINISHED 

PEROVSKITE OPTOELECTRONICS (PEOPLE)

Start date: Jan 1, 2016, End date: Dec 31, 2019,

The goal of this project is to develop a lasting collaboration between top class research teams in Europe and China that fosters progress in the broad area of perovskite optoelectronics through progress in materials science, chemistry, device physics, photophysics, and device engineering. This will be realized via a cross-European, trans-continental network. Such a network is required as perovskit...
Read Project

 4

 FINISHED 
Alcohol addiction ranks among the primary global causes of preventable death and disabilities in human population, but treatment options are very limited. Rational strategies for design and development of novel, evidence based therapies for alcohol addiction are still missing. Within this project, we will utilize a translational approach based on clinical studies and animal experiments to fill thi...
Read Project

 13

 FINISHED 

Combatting Bacterial Resistance in Europe (COMBACTE-NET)

Start date: Jan 1, 2013, End date: Dec 31, 2019,

The emergence of Antibiotic-resistant bacteria (ARB) is a global problem, having recently been elevated to the top three threats identified by the World Health Organisation (WHO), and subject of numerous national and international government activities, including the Trans-Atlantic Task Force on Antimicrobial Resistance established by the US and EU presidencies. The estimated costs of ARB are aro...
Read Project

 38

 FINISHED 
Over 30 million Europeans are blind or visually impaired, leading to reduced quality of life and a tremendous loss of productivity in society. Corneal blindness is the second largest cause of blindness globally and while treatable, millions remain unnecessarily blind due to issues of access to transplantable tissue, lack of standardized treatments, and the lag in translating new regenerative medic...
Read Project

 14

 FINISHED 

Learning for Innovative Design for Sustainability

Start date: Nov 1, 2016, End date: Oct 31, 2019,

The goal of the Learning for Innovative Design for Sustainability (L4IDS) project is to promote sustainable consumption and production of products and services in Europe. This will be achieved through a knowledge co-creation process and the development of training materials in order to teach and train students, faculty and enterprise staff of the design sector in Innovative Design for Sustainabili...
Read Project

 13

 FINISHED 

Wireless Visionaries for 2020 (WiVi-2020)

Start date: Oct 1, 2015, End date: Sep 30, 2019,

The industrial telecommunications sector stands currently at the forefront of a new era, which is marked by the transition to the new generation of wireless communications, namely the rise of 5G. With the recent explosion of the Machine-to-Machine (M2M) communications and the Internet-of-Things applications, the internet traffic is growing exponentially. Future networks should support applications...
Read Project

 3

 FINISHED 
SafeClouds is a research project supported by EASA and powered by a full spectrum of aviation stakeholders (Airlines, Airports, ANSPs, Eurocontrol, Research Entities, Safety Agencies) that develops cutting-edge technologies for aviation safety assurance in a cost-effective manner. SafeClouds proposes a data-driven approach to achieve a deeper understanding of the dynamics of the system, where risk...
Read Project

 15

 FINISHED 
Internationalisation is a key element in raising Higher Education Institutions profile and in contributing to their modernisation. It enhances creativity and innovation in all activities and services they provide. At European level, policies for Higher Education and their resulting initiatives have significantly intensified over the last years. Among the tools available for EHEIs, the Erasmus+ Pro...
Read Project

 10

 FINISHED 

European Network of STEM Professional Development Centres

Start date: Sep 1, 2016, End date: Aug 31, 2019,

To deal with the increasingly complex reality in class, which has accelerated in the last years, teachers need support through professional development (PD) activities to adopt new integrative methods. This need is particularly pronounced in STEM teaching (Science, Technology, Engineering and Mathematics) since STEM is a field in which all pupils, including migrants or those from disadvantaged bac...
Read Project

 14

 FINISHED 

Learning to Innovate with Families

Start date: Sep 1, 2016, End date: Aug 31, 2019,

1. The Learning to Innovate with Families (LIFE) project will seek to develop new skills, competencies, training products and methodologies to enable social workers and related professionals to innovate and adopt more effective interventions in working with families experiencing multiple and complex difficulties. 2. The need for the project was identified through a major research study undertaken ...
Read Project

 5

 FINISHED 
The life sciences are undergoing a transformation. Modern experimental tools study the molecules, reactions, and organisation of life in unprecedented detail. The precipitous drop in costs for high-throughput biology has enabled European research laboratories to produce an ever-increasing amount of data. Life scientists are rapidly generating the most complex and heterogeneous datasets that scienc...
Read Project

 47

 FINISHED 
Broadband mobile networks are experiencing exponential traffic growth. It is predicted that this trend will continue in the next five to ten years with an estimated compound annual growth rate of 0.6 to 1.0. Hence the traffic (mostly data) carried by a mobile operator’s network in 2022 could be over 1000 times of that in 2012. This traffic growth presents a huge challenge to both the mobile indust...
Read Project

 4

 FINISHED 

Anticipatory Networking Techniques in 5G and Beyond (ACT5G)

Start date: May 1, 2015, End date: Apr 30, 2019,

The rapid growth in mobile network data traffic contributed to the unprecedented speed of 4G LTE adoption, creating the need of sustainable capacity growth in next generation of wireless systems, namely 5G. A key success factor of 5G is network and management system design for flexibility by prediction and adaptation. To this end, anticipation is a promising new approach. By predicting and adaptin...
Read Project

 3

 FINISHED 
Plans for economic and monetary integration in the European Union call for fundamental changes in fiscal relations among EU member states and other countries. The 2012 Blueprint for the European Monetary Union (EMU) calls for deeper integration of fiscal policies at the level of domestic EU members, including establishing EU own-source revenues. The 2013 Social Dimension of the EMU emphasizes that...
Read Project

 11

 FINISHED 

Solitons and frequency combs in micro-resonators (SOLIRING)

Start date: Jan 1, 2016, End date: Dec 31, 2018,

The proposed research network will establish and support multi-lateral transfer of knowledge among leading research groups in the UK, Sweden, South Africa and Russia. The programme will allow to combine and share valuable cross-disciplinary expertise of the participating groups in the fields of nonlinear fiber optics, optical microresonators, nano-photonics, optical microcavities and nonlinear dyn...
Read Project

 3

 FINISHED 

MICroACTuators (MICACT)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Electroactive polymers (EAP) consist of materials capable of changing dimensions and/or shape in response to electrical stimuli. Most EAPs are also capable of generating electrical energy in response to applied mechanical forces. These polymeric materials exhibit properties well beyond what conventional metal or plastic-based actuators can offer, including very high mechanical flexibility (can be ...
Read Project

 13

 FINISHED 

Service Design for Innovation (SDIN)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Service Design for Innovation (SDIN)-ETN aims to integrate service design and service innovation approaches that are now dispersed into an innovative research training framework; doing so leverages the creative power of service design to foster innovation. Specific objectives are: creating a mass of researchers who can drive widespread application of service design to leapfrog innovation in Europe...
Read Project

 9

 FINISHED 

Rapid Bioprocess Development (Biorapid)

Start date: Jan 1, 2015, End date: Dec 31, 2018,

Reducing lead times of new medicinal drugs to the market by reducing process development and clinical testing timeframes is a critical driver in increasing European (bio)pharmaceutical industry competitiveness. Despite new therapeutic principles (e.g. the use of pluripotent stem cells, regenerative medicine and treatments based on personalised medicine or biosimilars) or regulatory initiatives to ...
Read Project

 9

 FINISHED 
The share of renewable energy is growing rapidly driven by the objective to reduce greenhouse gas emissions. The amount of electric power which can be supplied to the grid depends on the time of the day and weather conditions. A conventional fleet of thermal power plants is required to compensate for these fluctuations before large scale energy storage technologies will be mature and economically ...
Read Project

 23

 FINISHED 
European countries have vast coasts and economic zones that go far into the Atlantic and Arctic oceans and are challenging to monitor and manage. The need to protect and manage the vulnerable natural environment and marine resources in a sustainable manner is an important policy that is manifested in European legislation such as the European Strategy for Marine and Maritime Research. Moreover, the...
Read Project

 10

 FINISHED 
The fifth-generation (5G) is coming.Quo vadis 5G?What architectures, network topologies and technologies will define it?Are methodologies to the analysis, design and optimization of current cellular networks still applicable to 5G? 5Gwireless is the first integrated and multi-disciplinary training-through-research network of ESRs and Senior Supervisors fully committed to re-architecting current ce...
Read Project

 10

 FINISHED 
In order to address the challenge of undernourishment we need to understand better how plants grow, how they interact with their environment, and how to increase plants’ productivity. During the past decades important progress has been made in plant biology due to the development of genetic and genomic tools. Still many questions remain unanswered highlighting the need for the development of compl...
Read Project

 1

 FINISHED 
According to the findings of EU research project “East West Transport Corridor-2”, the European transport sector (esp. Eastern Europe, the Baltic Sea Region) depends also on Logistics competence level in KZ and RU. In spite of “Customs Union” btw. RU and KZ (created in 2010) and highly prioritized national strategies in KZ and RU for Logistics Management, the current competence level and education...
Read Project

 11

 FINISHED 
Road traffic accidents are a growing health, social and economic problem in the partner countries Egypt, Jordan and Lebanon. Whereas EU countries, steadily and systematically reduced the numbers and severity of road accidents last decades, by implementing modern solutions and applications, the problems continue to grow in EG-JO-LB. Much of this existing knowledge, practices and know-how in EU can ...
Read Project

 9

 FINISHED 
Higher agility for the European Manufacturing Industry is the main MOTIVATION for the openMOS project. While automated systems are appealing to achieve high productivity and quality requirements, their sensitivity to change is becoming increasingly a bottleneck to substantial reduction of lot sizes and more frequent change-overs. The project VISION is to enable full economic sustainability of the ...
Read Project

 16

 FINISHED 
"My recent discovery of the anomalously high thermoelectric power factor of ScN thin films demonstrates that unexpected thermoelectric materials can be found among the early transition-metal and rare-earth nitrides. Corroborated by first-principles calculations, we have well-founded hypotheses that these properties stem from nitrogen vacancies, dopants, and alloying, which introduce controllable s...
Read Project

 1

 FINISHED 
Disaster scenarios, like the Fukushima nuclear accident, clearly show that the capabilities of today's disaster response robots are not sufficient for providing the needed support to rescue workers. The CENTAURO project aims at development of a human-robot symbiotic system where a human operator is telepresent with its whole body in a Centaur-like robot, which is capable of robust locomotion and d...
Read Project

 9

 FINISHED 
The challenges and opportunities of diversity are at the heart of the European project with socioeconomic diversity, increased migration and arrival of refugees adding to the breadth of European identity. European schools are increasingly finding themselves on the frontline expected to be able to deal with diversity-related issues. Opportunities to experience diversity as educational enrichment ar...
Read Project

 8

 FINISHED 
"The purpose of Project VALCRI is to create a Visual Analytics-based sense-making capability for criminal intelligence analysis by developing and integrating a number of technologies into a coherent working environment for the analyst we call the Reasoning Workspace. Conceptually, the Reasoning Workspace comprises three areas: (i) a Data Space which will enable an analyst to see what data and them...
Read Project

 19

 FINISHED 
Smart-MEMPHIS project addresses the increasing demand for low-cost, energy-efficient autonomous systems by focusing on the main challenge for all smart devices - self-powering. The project aims to design, manufacture and test a miniaturized autonomous energy supply based on harvesting vibrational energy with piezo-MEMS energy harvesters. The project will integrate several multi-functional technolo...
Read Project

 9

 FINISHED 

Higher education student and staff mobility project

Start date: Jun 1, 2016, End date: May 31, 2018,

This is a higher education student and staff mobility project, please consult the website of the organisation to obtain additional details.
Read Project

 1